===================== Product Identification =====================
MSDS NAME:SATINGLIDE II WHITE BASE 296, 1280001
NIIN:00N078926
MSDS Number: CGGRR
=== Responsible Party ===
Company:FRAZEE INDUSTRIES INC
Address:6625 MIRAMAR RD
City:SAN DIEGE
State:CA
ZIP:92121
Country:US
Info Phone Num:619-275-9500
Emergency Phone Num:619-543-6000
Preparer's Name:ZEKE
CAGE:1GK99
=== Contractor Identification ===
Company:FRAZEE INDUSTRIES INC
Address:6625 MIRAMAR RD
City:SAN DIEGO
State:CA
ZIP:92121
Country:US
Phone:858-626-3600
CAGE:1GK99
============= Composition/Information on Ingredients =============
Name:ETHYLENE GLYCOL (SARA 313) (CERCLA) VP: 0.06 @ 68F
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2%
OSHA PEL:N/K
ACGIH TLV:C 50 PPM, VAPOR
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
2,2,4-TRIMETHYL-1,3-PENTANEDIOL; (2,2,4-TRIMETHYL-1,3 PENTANEDIOL
MONOISOBUTYRATE) VP: 0.004 @ 68F
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: 2%
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: VAPOR OR MIST CAN
CAUSE HEADACHE, NAUSEA AND IRRITATION OF NOSE, THROAT AND LUNGS.
SKIN ABSORPTION: NONE EXPECTED. INGESTION: MAY BE HARMFUL OR FATAL
IF SWALLOWED. INGESTION MAY CAU SE NAUSEA, VOMITING, DIARRHEA, AND
GASTROINTESTINAL IRRITATION. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:OVEREXPOSURE TO VAPORS CAN CAUSE
HEADACHES, DIZZINESS, AND NAUSEA.
======================= First Aid Measures =======================
First Aid:SKIN: CLEAN WITH SOAP AND WATER. INGESTION: CONSULT MD.
INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. CONSULT MD.
===================== Fire Fighting Measures =====================
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
WATER FOG.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROT EQUIPMENT
. WATER MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE
BUILD-UP WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:POLYMER FILM CAN BURN. MATERIAL CAN
SPLATTER ABOVE 212F.
================== Accidental Release Measures ==================
Spill Release Procedures:WIPE UP IMMEDIATELY AND SAFELY DISCARD
ABSORBENTS. IF THE EVENT OF LARGE SPILLS, DIKE THE AREA AND PUMP
THE MATERIAL TO AN EPA PERMITTED WASTE TANK.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE WITH ADEQUATE VENTILATION. AVOID
PROLONGED BREATHING OF VAPOR. AVOID PROLONGED OR REPEATED SKIN
CONTACT.
Other Precautions:KEEP AWAY FROM EXCESSIVE HEAT. AVOID ALL SOURCES OF
HEAT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE REQUIRED IF AIRBORNE CONCS ARE MAINTAINED
BELOW OCCUP EXPOS LIM. FOR AIRBORNE CONCS HIGHER THAN SUCH LIMITS
WEAR A NIOSH APPRVD MASK FOR ORG VAP, DUST, MIST & FUMES. WHEN
USING IN POORLY VENTILAT ED & CONFINED SPACES USE A NIOSH APPRVD
FRESH-AIR SUPPLYING OR SELF-CONTAINED BREATHING APPARATUS.
Ventilation:MAINTAIN GOOD VENTILATION TO KEEP PRODUCT VAPOR
CONCENTRATIONS BELOW SPECIFIED TLV.
Protective Gloves:NOEPRENE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH & DELUGE
SHOWER . TO PVNT RPTD/PRLNG SKIN CONT, WEAR PROT CLOTHING & BOOTS.
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE PRACT WHILE WORKING
W/MATL. DRY CONTAM CLTHG BEFORE REUSE. BARRIER CREAMS, DAILY
SHOWERS & CHANGE OF CLOTHES RECOMMENDED.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
VOC Pounds/Gallon:49
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:VISCOUS LIQUID, MILD ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID MATERIALS THAT ARE WATER-REACTIVE. ALSO AVOID STRONG ALKALINE AND
ACIDIC SUBSTANCES.
Stability Condition to Avoid:EXCESS HEAT MAY CAUSE CONTAINERS TO
RUPTURE. AVOID TEMPERATURES BELOW 40F. AVOID FREEZING CONDITIONS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBONS, ETC, BY COMBUSTION.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS CURRENTLY IN FORCE FOR THIS PRODUCT HAZARD
CLASS.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|