=====================  Product Identification  =====================

MSDS NAME:MILL AS 10W40, 52640414
NIIN:00N078854
MSDS Number: CGGQR
=== Responsible Party ===
Company:VALVOLINE OIL CO
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Country:US
Info Phone Num:606-267-7000
Emergency Phone Num:800-274-5263
CAGE:72527
=== Contractor Identification ===
Company:VALVOLINE OIL CO
Address:3499 BLAZER PKY
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Country:US
Phone:606-357-7206 / 800-274-5263
CAGE:72527

=============  Composition/Information on Ingredients  =============

Name:DETERGENT/DISPERSANT ENGINE OIL PACKAGE (CONTAINING ING 2)
Fraction by Wt: 10-15%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ZINC COMPOUNDS
Fraction by Wt: 10% MAX
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:LUBE OIL ADDITIVE
Fraction by Wt: 10-15%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:MINERAL OIL, PETRO DISTILS, SOLV-DEWAXED HEAVY PARAFFINIC
    (SEV SOLV-REFINING &/OR HYDROTREATMENT); (PETRO LUBE OIL)
CAS:64742-65-0
RTECS #:PY8038501
Fraction by Wt: 70-85%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Name:SUPDAT:AREA OF SPILL UNTIL CLEAN-UP HAS BEEN COMPLETED.
    STOP SPILL AT SOURCE. DIKE AREA OF SPILL TO PVNT (ING 6)
RTECS #:9999999ZZ

Name:ING 5:SPREADING. PUMP LIQ TO SALVAGE TANK. REMAINING LIQ
    MAY BE TAKEN UP ON SAND, CLAY, EARTH, FLOOR ABSORB/OTHER(ING 7)
RTECS #:9999999ZZ

Name:ING 6:ABSORBENT MATERIAL & SHOVEL INTO CONTAINERS.
RTECS #:9999999ZZ

Name:VENT:(GENERAL &/OR LOCAL EXHAUST) VENTILATION TO MAINTAIN
    EXPOSURE BELOW PEL/TLV(S).
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:NOT EXPECTED TO CAUSE IRRIT
    DURING NORMAL CNDTNS OF USE. SKIN:PRLNG/RPTD CONT MAY BE MILDLY
    IRRIT & MAY CAUSE DERM. INGEST:NOT EXPECTED TO BE TOX. PROD HAS
    LAXATIVE PROPERTIES & MAY CAUSE N AUS, ABDOM CRAMPS & DIARR.
    INHAL:NOT EXPECTED TO BE HAZ AT NORMAL ROOM TEMP. HOWEVER, IF EXPOS
    EXCEED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:PEL/TLV OF 5 MG/M3 FOR OIL MIST, THEN
    INHAL OF MIST MAY RSLT IN RESP IRRIT & POSS DISCOMFORT.
    CHRONIC:CAUTION: USED MOTOR OIL HAS BEEN SHOWN TO CAUSE SKIN CANCER
    IN CERTAIN LAB ANIMALS CONTIN UALLY EXPOS TO USED MOTOR OIL BY RPTD
    APPLICATIONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN:THORO WASH EXPOS AREA W/SOAP & WATER. REMOVE & LAUNDER
    CONTAM CLTHG BEFORE RE-USE. GET MED ATTN IF DISORDERS DEVELOP.
    EYES:FLUSH W/LG AMTS OF WATER FOR AT LST 15 MINS, LIFTING UPPER &
    LOWER LIDS	OCCAS. GET MED ATTN, IF IRRIT PERSISTS.INGEST:DO NOT
    INDUCE VOMIT, KEEP PERS WARM & QUIET & CALL MD/POIS CTL CTR IMMED.
    INHAL:REMOVE INDIVIDUAL TO FRESH AIR. IF BRTHG IS DFCLT, ADMIN
    OXYG. IF(SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>400F,>204C
Extinguishing Media:REGULAR FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
    WATER/FOAM MAY CAUSE FROTHING WHICH CAN BE VIOLENT & POSS ENDANGER
    LIFE OF FIREFIGHTER, ESP IF SPRAYED (SUPDAT)
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON OR
    NEAR DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN JUST RESIDUE) CAN
    IGNITE EXPLOSIVELY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SM SPILL:ABSORB LIQ ON VERMICULITE, FLOOR
    ABSORB/OTHER ABSORB MATL. LG SPILL:PVNT RUN-OFF TO SEWERS,
    STREAMS/OTHER BODIES OF WATER. IF RUN-OFF OCCURS, NOTIFY PROPER
    AUTHS AS REQD, THAT SPILL HAS OCCUR ED. PERS NOT WEARING PROT EQUIP
    SHOULD BE (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONT W/EYES & SKIN. AVOID
    PRLNG/RPTD CONT TO SKIN. CONTAINS PETRO OIL (GREASE). KEEP
    WORKPLACE AIRBORNE CONCS BELOW LEGAL & RECOMMENDED LIMITS.
Other Precautions:DO NOT TRANSFER TO UNLABELED CNTNR. BEFORE USE,
    REVIEW MSDS FOR MORE DETAILED INFO, INCL CHRONIC HLTH EFTS. CNTNRS
    OF THIS MATL MAY BE HAZ WHEN EMPTIED, SINCE EMPTIED CNTNRS RETAIN
    PROD RESIDUES (VAP,  LIQ &/OR SOLID), ALL HAZ PRECS (SUPDAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE. IF
    OIL MISTS ARE GENERATED ABOVE RECOMMENDED PEL/TLV OF 5 MG/M3, THEN
    A NIOSH APPROVED RESPIRATOR IS ADVISED IN ABSENCE OF PROPER
    ENVIRONMENTAL CONTROL. (S EE YOUR SAFETY EQUIPMENT SUPPLIER).
Ventilation:NOT REQD UNDER NORMAL CNDTNS OF USE. HOWEVER, IF UNUSUAL
    OPERATING CNDTNS EXIST, THEN PROVIDE SUFFICIENT MECH (ING 8)
Protective Gloves:RESISTANT GLOVES SUCH AS NITRILE RUBBER.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
    SHOWER . NORMAL WORK CLTHG COVERING ARMS & LEGS. WEAR OTHER APPROP
    (SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:INTO CNTNRS OF HOT, BURNING LIQ. DENSE SMOKE MAY BE
    GENERATED WHILE REMOVING. FIRST AID PROC:BRTHG HAS STOPPED GIVE
    ARTF RESP. KEEP PERS WARM, QUIET & GET MED ATTN. OTHER PREC:GIVEN
    IN	THIS MSDS MUST BE OBSERVED. OTHER PROTEQUIP:PROT EQUIP ESSNTL
    FOR YOUR OPERATION. SPILL PROC:EXCLUDED FROM (ING 5)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:570F,299C
Vapor Pres:<0.1 @ 20C
Vapor Density:HVR/AIR
Spec Gravity:0.877
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:LIGHT AMBER LIQUID, HOMOG SOLN.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM TOX MATLS:CARBON DIOXIDE &
    CARBON MONOXIDE, VARIOUS HYDROCARBONS, OXIDES OF SULFUR, NITROGEN &
    PHOSPOROUS, ETC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF I/A/W ALL APPLICABLE LOCAL, STATE &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***