=====================  Product Identification  =====================

MSDS NAME:CATAPOL SR 35-100
NIIN:00N078905
MSDS Number: CGGRK
=== Responsible Party ===
Company:ARNCO
Address:5141 FIRESTONE PLACE
City:SOUTH GATE
State:CA
ZIP:90280
Country:US
Info Phone Num:213-249-7500
Emergency Phone Num:800-424-8802;800-424-9300(CHEMTREC)
CAGE:9J663
=== Contractor Identification ===
Company:ARNCO
Box:UNKNOW
CAGE:06FE3
Company:ARNCO
CAGE:9J663

=============  Composition/Information on Ingredients  =============

Name:ISOCYANATE PREPOLYMER; (BLOCKED ISOCYANATE PREPOLYMER)
CAS:67874-95-7
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:2H-AZEPIN-2-ONE, HEXAHYDRO-; (CAPROLACTAM) (CERCLA)
CAS:105-60-2
RTECS #:CM3675000
OSHA PEL:N/K 
ACGIH TLV:1 MG/M3 DUST/5 VAP
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:M-PHENYLENEDIAMINE; (AROMATIC AMINE)
CAS:108-45-2
RTECS #:SS7700000
OSHA PEL:N/K 
ACGIH TLV:0.1 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES/SKIN: VAPORS AND FUMES
    FROM THE HEATED MATERIAL CAN CAUSE IRRITATION TO THE EYES AND SKIN.
    CONTACT WITH THE MOLTEN MATERIAL CAN RESULT IN THERMAL BURNS.
    INHALATION: VAPORS AND FUMES FROM T HE HEATED MATERIAL CAN CAUSE
    BREATHLESSNESS AND/OR IRRITATION TO THE RESPIRATORY TRACT. (EFFECTS
    OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: INGESTION: UNLIKELY. HOWEVER,
    INGESTION CAN RESULT IN STOMACH INJURY AND POSSIBLE KIDNEY
    TOXICITY. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH IMMED WITH FLOWING WATER FOR AT LEAST 15 MINUTES.
    GET MEDICAL ATTENTION IF SWELLING OR REDDEDNING OCCURS. SKIN:
    REMOVE CONTAMINATED CLOTHING. WASH AFFECTED AREA WITH SOAP AND
    WATER. REMOVE  TRACES OF RESIDUE WITH RUBBING ALCOHOL/IPA.
    INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
    ADMINISTER OXYGEN. INGESTION: CALL MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>485F,>252C
Extinguishing Media:DRY CHEMICAL, CHEMICAL FOAM, CARBON DIOXIDE, WATER
    SPRAY.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:MOISTURE CONTAMINATION MAY FORM CARBON
    DIOXIDE. DO NOT RESEAL CONTAMINATED CONTAINERS AS PRESSURE BUILD-UP
    MAY RUPTURE THEM.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCOOP UP, WITH SPATULA/SHOVEL, INTO A WASTE
    CONTAINER, COVER, BUT DO NOT SEAL AND REMOVE FROM WORK AREA. WIPE
    OFF AREA WITH COMMERCIAL GRADE ISOPROPYL ALCOHOL AND CLEAN WIPING
    RAG.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:CALIFORNIA PROPOSITION 65: BASED ON INFORMATION
    CURRENTLY AVAILABLE, THIS PRODUCT CONTAINS CHEMICLS SHOWING LIMITED
    EVIDENCE OF CARCINOGENICITY IN PEOPLE AND/OR SUFFICIENT EVIDENCE IN
    ANIMALS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR RESPIRATOR AT
    HIGH TEMPERATURES.
Ventilation:LOCAL EXHAUST REQUIRED TO REMOVE FUMES GENERATED DURING
    CURE AT 285F. GOOD GENERAL/MECHANICAL VENT IS RECOMMENDED.
Protective Gloves:CHEM RESIST NATURAL RUBBER/NEOPRENE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
    LAB COATS/OTHER SUITABLE CLTHG TO AVOID SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.26-1.28
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR TO AMBER/GREY VISCOUS LIQUID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER DEGRADES RESIN AND HAMPERS CURING; STRONG OXIDIZERS.
Stability Condition to Avoid:LONG TERM STORAGE AT TEMPERATURES ABOVE
    180F MAY LEAD TO GELLING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    OXIDES OF NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF UNCURED MATERIAL ACCORDING TO
    FEDERAL, STATE, AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***