=====================  Product Identification  =====================

MSDS NAME:LACTIC ACID ALUMINUM SALT, 69812
NIIN:00N085052
MSDS Number: CGZWS
=== Responsible Party ===
Company:SIGMA CHEMICAL CO
Box:14508
City:ST LOUIS
State:MO
ZIP:63178
Country:US
Info Phone Num:314-771-5765
Emergency Phone Num:314-771-5765
CAGE:21076
=== Contractor Identification ===
Company:SIGMA CHEMICAL COMPANY
Address:3050 SPRUCE ST
Box:14508
City:ST LOUIS
State:MO
ZIP:63178
Country:US
Phone:314-771-5765
CAGE:21076

=============  Composition/Information on Ingredients  =============

Name:ALUMINUM, TRIS(LACTATO)-; (ALUMINUM LACTATE)
CAS:18917-91-4
RTECS #:BD2214000
Fraction by Wt: 100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY BE HARMFUL BY INHALATION
    INGESTION OR SKIN ABSORPTION, CAUSES EYE AND SKIN IRRITATION.
    MATERIAL IS IRRITATING TO MUCOUS MEMBRANES AND UPPER RESPIRATORY
    TRACT. TO THE BEST OF MFR'S KNOWLEDGE,  THE CHEMICAL, PHYSICAL AND
    TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGHLY INVESTIGATED.
    TARGET (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:ORGAN DATA:EFFECTS ON EMBRYO OR FETUS
    (FETOTOXICITY); EFFECTS ON NEWBORN (PHYSICAL).
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes:IMMEDIATELY FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT
    LEAST 15 MINUTES. SKIN:IMMEDIATELY WASH W/SOAP & COPIOUS AMOUNTS OF
    WATER. WASH CONTAMINATED CLOTHING BEFORE REUSE. INHAL:REMOVE TO
    FRESH AIR.	IF NOT BREATHING GIVE ARTIFICIAL RESPIRATION. IF
    BREATHING IS DIFFICULT, GIVE OXYGEN. INGEST:WASH OUT MOUTH W/WATER
    PROVIDED PERSON IS CONSCIOUS. CALL MD.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:NONCOMBUSTIBLE. USE EXTINGUISHING MEDIA APPROPRIATE
    TO SURROUNDING FIRE CONDITIONS. THIS MATL IS AN EXTINGUISHING
    AGENT.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR NIOSH APPROVED RESPIRATOR, CHEMICAL
    SAFETY GOGGLES, RUBBER BOOTS & HEAVY RUBBER GLOVES. SWEEP UP, PLACE
    IN A BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE
    AREA & WASH SPILL SITE AF TER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT BREATHE DUST. AVOID CONTACT
    W/EYES, SKIN & CLOTHING. KEEP TIGHTLY CLOSED. STORE IN A COOL, DRY
    PLACE.
Other Precautions:IRRITANT. IRRITATING TO EYES, RESPIRATORY SYSTEM &
    SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:COMPATIBLE CHEMICAL-RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . WEAR SUITABLE PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Solubility in Water:SOLUBLE 50 (20C)
Appearance and Odor:SOLID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF CARBON MONOXIDE, CARBON
    DIOXIDE, ALUMINUM OXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISSOLVE OR MIX MATERIAL W/COMBUSTIBLE SOLVENT &
    BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AFTERBURNER & SCRUBBER.
    OBSERVE ALL FEDERAL, STATE & LOCAL ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***