=====================  Product Identification  =====================

MSDS NAME:ALL PATCH
NIIN:00N065441
MSDS Number: CGZVG
=== Responsible Party ===
Company:CONSPEC MARKETING AND MANUFACTURING CO
Address:636 SOUTH 66TH TERRACE
City:KANSAS CITY
State:KS
ZIP:66111
Country:US
Info Phone Num:800-348-7351
Emergency Phone Num:800-535-5053
CAGE:0WHM1
=== Contractor Identification ===
Company:CONSPEC MARKETING & MFG CO INC
Address:636 S 66TH TERRACE
Box:City:KANSAS CITY
State:KS
ZIP:66111
Country:US
Phone:800-348-7351
CAGE:0WHM1

=============  Composition/Information on Ingredients  =============

Name:SILICATE, PORTLAND CEMENT; (PORTLAND CEMENT)
CAS:65997-15-1
RTECS #:VV8770000
Fraction by Wt: 30-70%
OSHA PEL:50 MPPCF
ACGIH TLV:10 MG/M3 TDUST

Name:SILICA GEL; (SILICA CRYSTALLINE QUARTZ)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 30-70%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DRY MATERIAL: NUISANCE DUST MAY
    CAUSE REVERSIBLE RESPIRATORY PROBLEMS. OFTEN NON-PROTECTING
    EXPOSURE OVER TLV MAY RESULT IN SILICOSIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING EYE, SKIN AND
    RESPIRATORY DISORDERS.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: IRRIGATE WITH WATER
    FOR AT LEAST 15 MINUTES OR CONSULT MD. SKIN: WASH EXPOSED SKIN AREA
    WITH SOAP AND WATER, CONSULT MD IF IRRITATION PERSISTS. INGESTION:
    CALL M D IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE EXTINGUISHING AGENT SUITABLE FOR TYPE OF
    SURROUNDING FIRE AND STRUCTURES.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE DRY CLEAN UP METHOD THAT DOES NOT DISPENSE
    MATERIAL INTO THE AIR. DO NOT BREATHE DUST AND AVOID CONTACT WITH
    EYES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP MATERIAL DRY UNTIL USED. HIGH
    HUMIDITY OR MOISTURE WILL CAUSE PREMATURE HARDENING OF MATERIAL.
Other Precautions:EXPOSURE TO AIRBORNE CRYSTALLINE SILICA SHALL NOT
    EXCEED AN 8 HOUR/DAY, SEE 29 CFR 1910.1000 TABLE Z-3. SEE ALSO OSHA
    29 CFR 1910.134, ANSI Z-88.2, NIOSH POCKET GUIDE TO CHEMICAL
    HAZARD.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED DUST RESPIRATORS.
Ventilation:LOCAL EXHAUST TO MEET PEL.
Protective Gloves:ANY RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . BOOTS & CLOTHING ADEQ TO PREVENT SKIN
    CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:2.7-3.0(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY POWDER WITH LOW OR NO ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:UPON DIRECT CONTACT WITH WATER, MATERIAL
    WILL HARDEN.
Hazardous Decomposition Products:NOT APPLICABLE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MATERIAL CAN BE DISPOSED OF AS COMMON WASTE IN
    ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. NOT LISTED AS
    HAZARDOUS WASTE BY FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***