=====================  Product Identification  =====================

MSDS NAME:MOLECULAR SIEVE 4A
NIIN:01-144-3004
MSDS Number: CHHRN
=== Responsible Party ===
Company:MULTISORB TECHNOLOGIES INC (FORMERLY MULTIFORM)
Address:325 HARLEM RD
City:WEST GENECA
State:NY
ZIP:14224-1893
Country:US
Info Phone Num:716-883-8900/FAX 716-824-0387
Emergency Phone Num:716-883-8900/FAX 716-824-0387
Preparer's Name:G.E. MCKEDY
CAGE:JO378
=== Contractor Identification ===
Company:MULTISORB TECHNOLOGIES INC
Address:325 HARLEM ROAD
Box:City:BUFFALO
State:NY
ZIP:14224-1893
Country:US
Phone:716-824-8900
CAGE:22627
Company:MULTISORB TECHNOLOGIES INC
Address:325 HARLEM RD
Box:City:BUFFALO
State:NY
ZIP:14224
Country:US
Phone:716-824-8900
CAGE:JO378

=============  Composition/Information on Ingredients  =============

Name:SODIUM OXIDE
CAS:1313-59-3
Fraction by Wt: <30%
Other REC Limits:NONE RECOMMENDED

Name:MAGNESIUM OXIDE
CAS:1309-48-4
RTECS #:OM3850000
Fraction by Wt: <5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 PARTICULATE
ACGIH TLV:10 MG/M3; FUME; 9596

Name:ALUMINUM OXIDE
CAS:1302-74-5
RTECS #:GN0231000
Fraction by Wt: <30%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 RESP. DUST
ACGIH TLV:10 MG AL2O3/M3

Name:SILICON DIOXIDE
CAS:14808-57-0
Fraction by Wt: <50%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:PRODUCT'S LD50 (ORAL RAT) WAS NOT STATED
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:TARGET-ORGANS:SKIN. ACUTE-MAY CAUSE
    EYE, SKIN, MUCOUS MEMBRANE DAMAGE. CHRONIC-PROLONGED INHALATION MAY
    DAMAGE LUNGS.
Explanation of Carcinogenicity:MANUFACTURER GAVE NO INFORMATION ABOUT
    CARCINOGENICITY. HMIS FOUND NO LISTING & DOES NOT EXPECT IT TO BE
    CARCINOGENIC.
Effects of Overexposure:EYE/SKIN/MUCOUS MEMBRANES: DAMAGE. INHALATION:
    LUNG DAMAGE.
Medical Cond Aggravated by Exposure:ASTHMA & INFLAMMATORY OR FIBROTIC
    PULMONARY DISEASE.

=======================  First Aid Measures  =======================

First Aid:SEEK MEDICAL ASSISTANCE FOR FURTHER TREATMENT, OBSERVATION &
    SUPPORT IF NECESSARY. EYE-FLUSH W/WATER FOR 15 MIN & CONTACT A
    PHYSICIAN. SKIN-WASH AFFECTED AREA W/SOAP & WATER.
    INHALATION-REMOVE TO FRES H AIR & GET MEDICAL ASSISTANCE IF
    NECESSARY. INGESTION-IN LARGE QUANTITIES, DRINK LARGE AMOUNTS OF
    WATER. INDUCE VOMITING IF PATIENT IS CONSCIOUS.

=====================  Fire Fighting Measures  =====================

Flash Point:DOES NOT BURN
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
    FIRE.
Fire Fighting Procedures:DEPENDS ON USE OF MATERIAL. USED MATERIAL MAY
    CONTAIN PRODUCTS OF A HAZARDOUS NATURE. USER OF PORDUCT MUST
    IDENTIFY HAZARDS & INFORM FIREFIGHTERS OF HAZARDS.
Unusual Fire/Explosion Hazard:WHEN EXPOSED TO WATER, MOLECULAR CAN GET
    QUITE HOT. WHEN FIRST WETTED, IT CAN HEAT TO BOILING POINT OF
    WATER. FLOODING WILLL REDUCE THE TEMPERATURE TO SAFETY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP SPILL AREA. COLLECT & PLACE SPILLED
    MATERIAL IN A WASTE DISPOSAL CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID BREATHING DUST. USE WITH
    ADEQUATE VENTILATION. WASH AFTER HANDLING.
Other Precautions:USE GOOD PERSONAL HYGIENE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR WHEN PEL MAY BE
    EXCEEDED.
Ventilation:NOT APPLICABLE.
Protective Gloves:RECOMMENDED.
Eye Protection:SAFETY GOGGLES WITH SIDE SHIELDS.
Other Protective Equipment:SUPPLIER LEFT THIS FIELD BLANK.
Work Hygienic Practices:AVOID RAISING DUST. AVOID CONTACT WITH SKIN,
    EYES, CLOTHING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
NRC/State Lic Num:NONE
Spec Gravity:2.1
Appearance and Odor:PRODUCT MAY APPEAR AS A BEAD PELLET, MESH CAKE OR
    POWDER. ODORLESS

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
SUDDEN CONTACT WITH HIGH CONCENTRATIONS OF CHEMICALS HAVING HIGH HEATS
    OF ABSORPTION.
Stability Condition to Avoid:MOISTURE (WATER) CAN CAUSE RISE IN
    TEMPERATURE, CONTACT WITH SKIN MAY CAUSE BURNS.
Hazardous Decomposition Products:DOES NOT REAADILY DECOMPOSE. ABSORBED
    MATERIALS SUCH AS HYDROCARBONS WILL BE MORE EASILY GIVEN OFF.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE
    CONTAINER OR LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER IN FULL
    COMPLIANCE WITH ALL FEDERAL STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***