=====================  Product Identification  =====================

MSDS NAME:BT LATEX PRIMER SEALER WHITE, 12132
NIIN:00N088690
MSDS Number: CHSQX
=== Responsible Party ===
Company:BRUNING PAINT CO
Address:601 S HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:410-342-3636
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:EO376
=== Contractor Identification ===
Company:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520

=============  Composition/Information on Ingredients  =============

Name:ETHYLENE GLYCOL (SARA 313) (CERCLA)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1.25%
OSHA PEL:N/K 
ACGIH TLV:50 PPM, VAPOR, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:PIGMENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:RESP PROT: PARTICULATE & GAS & VAPOR. IN CONFINED AREAS USE
    NIOSH APPRVD AIR LINE TYPE RESPS OR HOODS. RESP (ING 5)
RTECS #:9999999ZZ

Name:ING 4: PROT MAY ALSO BE NECESSARY IN ANY LATER MFG
    OPERATIONS IN WHICH PROD MAY BECOME AIRBORNE IN FORM OF VAP/DUST.
RTECS #:9999999ZZ

Name:VENT: RESP TO PREVENT OVEREXP. PROVIDE GENERAL DILUTION OR
    LOCAL EXHAUST VENT IN VOLUME & PATTERN TO KEEP TLV (ING 7)
RTECS #:9999999ZZ

Name:ING 6: OF MOST HAZARDOUS INGREDIENT LISTED BELOW ACCEPTABLE
    LIMIT, LEL BELOW STATED LIMIT & TO REMOVE DECOMP (ING 8)
RTECS #:9999999ZZ

Name:ING 7: PRODS DURING WELDING OR FLAME CUTTING ON SURFACES
    COATED W/THIS PRODUCT.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:RPTS HAVE ASSOC RPTD & PRLNGD OCCUP
    OVEREXP TO SOLVS W/PERM BRAIN & NERVOUS SYS DMG. INTENTIONAL MISUSE
    BY DELIB CONC & INHAL CONTENTS MAY BE HARMFUL/FATAL. DO NOT BREATHE
    VAPS/SPRAY MIST. WEAR APPROP , PROPERLY FITTED NIOSH APPRVD RESP
    DURING & AFTER APPLICATN UNLESS AIR MONITORING DEMONSTRATES VAP/
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: MIST LEVELS ARE BELOW APPLIC LIMS.
    FOLLOW RESP MFR'S DIRECTIONS FOR RESP USE. BASED ON PRESENCE OF
    INGRED 1, CEILING LIMIT OF EMPLOYEE'S EXPOS TO THIS COMPONENT SHALL
    NOT EXCEED 125 MG/M3 DU RING ANY PART OF WORK DAY. PROD CAN BE
    IRRITATING TO EYES. PROD CNTNS ONE/MORE REPORTED
    TERATOGENS/SUSPECTED TERATOGENS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/LUKEWARM WATER FOR AT LEAST 15 MIN. SEEK MD
    IMMED. SKIN: FLUSH WASH W/COPIOUS AMTS OF LUKEWARM WATER. REMOVE
    CONTAM CLTHG PROMPTLY. CONTACT MD IMMED. INHAL: REMOVE EXPOSED
    INDIVIDUAL TO  FRESH AIR. RESTORE BRTHG IF REQD. CONTACT MD IMMED.
    INGEST: NEVER GIVE ANYTHING BY MOUTH IF UNCON. IF CONSCIOUS &
    ALERT, VOMIT SHOULD BE INDUCED FOR INGESTS OF MORE THAN ONE SWALLOW
    (1-2 TBSP (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
    CNTNRS EXPOSED TO INTENSE HEAT FROM FIRES SHOULD BE COOLED W/WATER
    TO PREVENT VAPOR PRESS BUILDUP WHICH (SUPDAT)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT STORE ABOVE
    120F. DO NOT TAKE INTERNALLY. CLOSED CONTAINER AFTER EACH USE. KEEP
    OUT OF REACH OF CHILDREN.
Other Precautions:MANUFACTURER TAKES NO RESPONSIBILITY FOR DETERMINING
    WHAT MEASURES ARE REQUIRED FOR PERSONAL PROTECTION IN ANY SPECIFIC
    APPLICATION. THE GENERAL INFORMATION GIVEN SHOULD BE USED WITH
    DISCRETION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR OR OPEN AREAS USE NIOSH APPRVD MECH
    FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
    SPRAY APPLICATION. IN RESTRICTED VENT AREAS USE NIOSH APPRVD
    CHEM-MECH FILTERS DESIGNE D TO REMOVE A COMBINATION OF (ING 4)
Ventilation:USE VENT AS REQD TO CONTROL VAP CONCS. AVOID PRLNGD/RPTD
    BRTHG OF VAPS. IF EXPOS EXCEEDS TLV, USE NIOSH APPRVD (ING 6)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING & USING
    WASHROOM. REMOVE CONTAM CLTHG IMMED & DO NOT WEAR UNTIL PROPERLY
    LAUNDERED.
Supplemental Safety and Health
FIRE FIGHT PROC: COULD RSLT IN CNTNR RUPTURE. HAZ DECOMP PRODS: OXIDES
    OF NITROGEN. FIRST AID PROC: FOR ADULT) PREFERABLY W/SYRUP OF
    IPECAC UNDER DIRECTION FROM MD OR POIS CTR. IF SYRUP OF IPECAC IS N
    OT AVAIL, VOMIT CAN BE INDUCED BY GENTLY PLACING TWO FINGERS IN
    BACK OF THROAT. IF POSS, DO NOT LEAVE VICTIM UNATTENDED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.25 
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:56.69

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
THIS PRODUCT IS INCOMPATIBLE WITH STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ FUMES WHEN HEATED TO
    DECOMP AS IN WELDING. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON
    DIOXIDE & (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED OR WATERWAY.
    DISPOSE OF PRODUCT IN ACCORDANCE WITH APPLICABLE LOCAL, COUNTY,
    STATE AND FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***