=====================  Product Identification  =====================

MSDS NAME:AQUATHANE ACRYLIC GLOSS LATEX SIGNAL YELLOW, 1635
NIIN:00N088687
MSDS Number: CHSQT
=== Responsible Party ===
Company:BRUNING PAINT CO
Address:601 S HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:410-342-3636
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:EO376
=== Contractor Identification ===
Company:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520

=============  Composition/Information on Ingredients  =============

Name:PROPYLENE GLYCOL
CAS:57-55-6
RTECS #:TY2000000
Fraction by Wt: 5-7.5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:PIGMENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SUPDAT: IN WHICH PRODUCT MAY BECOME AIRBORNE IN THE FORM OF
    VAPOR OR DUST.
RTECS #:9999999ZZ

Name:VENT: RESP TO PREVENT OVEREXP. PROVIDE GENERAL DILUTION OR
    LOCAL EXHAUST VENT IN VOLUME & PATTERN TO KEEP TLV OF (ING 6)
RTECS #:9999999ZZ

Name:ING 5: THE MOST HAZ INGRED LISTED BELOW ACCEPTABLE LIMIT,
    LEL BELOW STATED LIMIT & TO REMOVE DECOMPOSITION PRODS (ING 7)
RTECS #:9999999ZZ

Name:ING 6: DURING WELDING OR FLAME CUTTING ON SURFACES COATED
    W/THIS PRODUCT.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOC RPTD & PRLNGD OCCUP
    OVEREXP TO SOLVENTS W/PERM BRAIN & NERVOUS SYSTEM DMG. INTENTIONAL
    MISUSE BY DELIB CONC & INHALING CONTENTS MAY BE HARMFUL/FATAL. DO
    NOT BREATHE VAPS OR SPRAY MI ST. WEAR AN APPROP, PROPERLY FITTED
    NIOSH APPRVD RESP DURING & AFTER APPLICATION UNLESS AIR MONITORING
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: DEMONSTRATES VAP/MIST LEVELS ARE
    BELOW APPLIC LIMS. FOLLOW RESP MFR'S DIRECTIONS FOR RESP USE. BASED
    ON THE PRESENCE OF INGRED 1, THIS PROD HAS LOW TOXICITY BUT IS
    READILY ABSORBED & CAN CAR RY OTHER MATLS THRU INTACT SKIN, MAY
    BEHARMFUL IF IT IS SWALLOWED, CAN BE IRRITATING TO EYES, & MAY
    CAUSE SKIN IRRIT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/LUKEWARM WATER FOR AT LEAST 15 MIN. SEEK MD
    IMMED. SKIN: FLUSH WASH W/COPIOUS AMTS OF LUKEWARM WATER. REMOVE
    CONTAM CLTHG PROMPTLY. CONTACT MD IMMED. INHAL: REMOVE EXPOSED
    INDIVIDUAL TO  FRESH AIR. RESTORE BRTHG IF REQD. CONTACT MD IMMED.
    INGEST: RINSE MOUTH IMMED. GIVE EXPOSED INDIVIDUAL 6 TO 8 OUNCES OF
    LIQ. (NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERSON.) DO NOT
    INDUCE (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
    CNTNRS EXPOSED TO INTENSE HEAT FROM FIRES SHOULD BE COOLED W/WATER
    TO PREVENT VAPOR PRESS BUILDUP WHICH (SUPDAT)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT STORE ABOVE
    120F. DO NOT TAKE INTERNALLY. CLOSED CONTAINER AFTER EACH USE. KEEP
    OUT OF REACH OF CHILDREN.
Other Precautions:MANUFACTURER TAKES NO RESPONSIBILITY FOR DETERMINING
    WHAT MEASURES ARE REQUIRED FOR PERSONAL PROTECTION IN ANY SPECIFIC
    APPLICATION. THE GENERAL INFORMATION GIVEN SHOULD BE USED WITH
    DISCRETION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR OR OPEN AREAS USE NIOSH APPRVD MECH
    FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
    SPRAY APPLICATION. IN RESTRICTED VENT AREAS USE NIOSH APPRVD
    CHEM-MECH FILTERS DESIGNE D TO REMOVE A COMBINATION OF (SUPDAT)
Ventilation:USE VENT AS REQD TO CONTROL VAP CONCS. AVOID PRLNGD/RPTD
    BRTHG OF VAPS. IF EXPOS EXCEEDS TLV, USE NIOSH APPRVD (ING 5)
Protective Gloves:NATRL RUB, NEOPRENE, BUNA N OR NITRILE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING & USING
    WASHROOM. REMOVE CONTAM CLTHG IMMED & DO NOT WEAR UNTIL PROPERLY
    LAUNDERED.
Supplemental Safety and Health
FIRE FIGHT PROC: COULD RESULT IN CNTNR RUPTURE. HAZ DECOMP PRODS:
    OXIDES OF NITROGEN. FIRST AID PROC: VOMITING UNLESS ADVISED BY MD.
    CONTACT MD IMMED. RESP PROT: PARTICULATE & GAS & VAP. IN CONFINED A
    REAS USE NIOSH APPRVD AIR LINE TYPE RESPS OR HOODS. RESP PROT MAY
    ALSO BE NECESSARY IN ANY LATER MFG OPERATIONS (ING 4)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:0.50 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.114 
VOC Grams/Liter:1.94
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:64.19

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
THIS PRODUCT IS INCOMPATIBLE WITH STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ FUMES WHEN HEATED TO
    DECOMP AS IN WELDING. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON
    DIOXIDE & (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED OR WATERWAY.
    DISPOSE OF PRODUCT IN ACCORDANCE WITH APPLICABLE LOCAL, COUNTY,
    STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***