===================== Product Identification =====================
MSDS NAME:POOL LIFE SWIMMING POOL PAINT GULF STREAM BLUE, 54715
NIIN:00N088692
Status Code:A
MSDS Number: CHSQZ
=== Responsible Party ===
Company:BRUNING PAINT CO
Address:601 SOUTH HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:410-342-3636
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:EO376
=== Contractor Identification ===
Company:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520
============= Composition/Information on Ingredients =============
Name:AROMATIC NAPHTHA
CAS:64742-95-6
RTECS #:WF3400000
Fraction by Wt: 25-35%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 25-35%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM
Name:MAGNESIUM SILICATE
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 10-15%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/M3 RDUST
Name:PIGMENTS
OSHA PEL:N/K
ACGIH TLV:N/K
Name:VOLATILE ORGANIC COMPOUND: 4.588
RTECS #:9999999VO
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SUP DAT: BUILDUP WHICH COULD RESULT IN CONTAINER RUPTURE.
RTECS #:9999999ZZ
Name:SPILL PROC: NOTIFY LOCAL HEALTH AND POLLUTION CONTROL
AGENCIES. CALL SPILL RESPONSE TEAMS IF LARGE SPILL.
RTECS #:9999999ZZ
Name:RESP PROT: IN OUTDOOR/OPEN AREAS USE NIOSH APPRVD MECH
FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF (ING 9)
RTECS #:9999999ZZ
Name:ING 8: OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED
VENT AREAS USE NIOSH APPRVD CHEM/MECH FILTERS DESIGNED (ING 10)
RTECS #:9999999ZZ
Name:ING 9: TO REMOVE COMBINATION OF PARTICULATE & GAS & VAP. IN
CONFINED AREAS USE NIOSH APPRVD AIR LINE TYPE RESPS (ING 11)
RTECS #:9999999ZZ
Name:ING 10: OR HOODS. RESPIRATORY PROTECTION MAY ALSO BE
NECESSARY IN ANY LATER MANUFACTURING OPERATIONS IN WHICH (ING 12)
RTECS #:9999999ZZ
Name:ING 11: THE PRODUCT MAY BECOME AIRBORNE IN THE FORM OF
VAPOR OR DUST.
RTECS #:9999999ZZ
Name:VENT: RESP TO PVNT OVEREXP. PROVIDE GEN DILUTION/LOC EXHST
VENT IN VOL & PATTERN TO KEEP TLV OF MOST HAZ ING (ING 14)
RTECS #:9999999ZZ
Name:ING 13: BELOW ACCEPTABLE LIMIT, LEL BELOW STATED LIMIT, AND
TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR (ING 15)
RTECS #:9999999ZZ
Name:ING 14: FLAME CUTTING ON SURFACES COATED WITH THIS PRODUCT.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: RPTS HAVE ASSOC RPTD &
PRLNG OCCUP OVEREXP TO SOLVS W/PERM BRAIN & NERV SYS DMG.
INTENTIONAL MISUSE BY DELIB CONC & INHALING CONTENTS MAY BE
HARMFUL/FATAL. MAY CAUSE NOSE, THROAT & EYE IRRIT. MAY CAUSE CNS
DEPRESS. STODDARD SOLV IS A NERV SYS DEPRESSANT & MUC MEMB
IRRITANT. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOR RELEVANT.
Effects of Overexposure:HLTH HAZ: SYMPS OF OVEREXP INCL DIZZ, HDCH,
INTOXICATION W/EUPHORIA LEADING TO UNCON. INGEST WILL CAUSE IRRIT
OF GI TRACT & MAY CAUSE EFTS RESEMBLING THOSE FROM INHAL OF VAP.
MAY CAUSE SKIN IRRIT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes: FLUSH W/LUKE WARM WATER FOR AT LEAST 15 MIN. SEEK MD
IMMED. SKIN: FLUSH WASH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE
CONTAM CLTHG PROMPTLY. CONT MD IMMED. INHAL: REMOVE TO FRESH AIR.
RESTORE B RTHG IF REQUIRED. CONT MD IMMED. INGEST: RINSE MOUTH
IMMED. GIVE 6-8 OZ OF LIQ. (NEVER GIVE ANYTHING BY MOUTH TO UNCON
PERS.) DO NOT INDUCE VOMIT UNLESS ADVISED BY MD. CONT MD IMMED.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:0.5%
Upper Limits:7.0%
Extinguishing Media:NATIONAL FIRE PROTECTION ASSOCIATION CLASS B
EXTINGUISHER IS DESIGNED TO EXTINGUISH NFPA CLASS IB FLAMMABLE LIQ
FIRES.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE USED TO COOL CLSD
CONTRS TO PVNT PRESS BUILDUP & POSS (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAME. CLSD CONTRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY TO HOT (SUP DAT)
================== Accidental Release Measures ==================
Spill Release Procedures:STOP &/OR CONTAIN DISCHARGE IF IT MAY BE DONE
SAFELY. KEEP ALL SOURCES OF IGNIT AWAY. VENT AREA OF SPILL. USE
NON-SPKG TOOLS FOR CLEANUP. COVER W/INERT MATL TO REDUCE FUMES.
KEEP OUT OF DRAINS, SEWERS /WATERWAYS. CONT FIRE AUTHORITIES.
(ING7)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:MANUFACTURER TAKES NO RESPONSIBILITY
FOR DETERMINING WHAT MEASURES ARE REQUIRED FOR PERSONAL PROTECTION
IN ANY SPECIFIC APPLICATION.
Other Precautions:GENERAL INFORMATION GIVEN SHOULD BE USED WITH
DISCRETION. DO NOT BREATHE VAPORS/SPRAY MISTS. KEEP FROM FREEZING.
DO NOT STORE >120F. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER
EACH USE. KEEP OUT OF REACH OF CHILDREN! AVOID EYE CONTACT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED NIOSH APPROVED
RESPIRATOR DURING & AFTER APPLICATION UNLESS AIR MONITORING
DEMONSTRATES VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MANUFACTURER' S DIRECTIONS FOR RESPIRATOR USE. (ING 8)
Ventilation:USE VENT AS REQUIRED TO CTL VAP CONCS. AVOID PRLNG/RPTD
BRTHG OF VAPS. IF EXPOS EXCEEDS TLV, USE NIOSH APPRVD (ING 13)
Protective Gloves:NATURAL RUBB, NEOPRENE, BUNA N/NITRILE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
WASHROOM. REMOVE CONTAM CLTHG IMMED & DO NOT WEAR UNTIL PROPERLY
LAUNDERED.
Supplemental Safety and Health
FIRE FIRE PROT: AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER
IS USED, FOG NOZZ ARE PREF. EXPLO HAZ: SURFS. NEVER USE
WELDING/CUTTING TORCH ON/NEAR CONTR (EVEN EMPTY) BECAUSE PROD (EVEN
RESID UE) MAY IGNITE EXPLO. CONTRS EXPOSED TOINTENSE HEAT FROM
FIRES SHOULD BE COOLED W/WATER TO PVNT VAP PRESS (ING 6)
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:3 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.05
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:66.97
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:AVOID EXPOSURE TO SPARKS, OPEN FLAME, HOT
SURFACES, AND ALL SOURCES OF HEAT AND IGNITION.
Hazardous Decomposition Products:MAY PRDCE HAZ FUMES WHEN HEATED TO
DECOMP AS IN WELDING. FUMES MAY CONTAIN CARBON MONOXIDE/DIOXIDE &
OXIDES OF NITROGEN.
==================== Disposal Considerations ====================
Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED, OR WATERWAY.
DISPOSE OF PRODUCT IN ACCORDANCE WITH APPLICABLE LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|