===================== Product Identification =====================
MSDS NAME:04600CHA-SC, ACTIVATOR FOR CAMO STD DRY ZENTHANE PLUS
NIIN:01-465-9667
Status Code:A
MSDS Number: CKYPT
=== Responsible Party ===
Company:HENTZEN COATINGS INC
Address:6937 WEST MILL ROAD
Box:18749
City:MILWAUKEE
State:WI
ZIP:53218
Country:US
Info Phone Num:414-353-4200
Emergency Phone Num:414-353-4200
Chemtrec Ind/Phone:(800)424-9300
CAGE:09225
=== Contractor Identification ===
Company:HENTZEN COATINGS INC
Address:6937 WEST MILL ROAD
Box:18749
City:MILWAUKEE
State:WI
ZIP:53218
Country:US
Phone:414-353-4200
CAGE:09225
============= Composition/Information on Ingredients =============
Name:NAPHTHALENE
CAS:91-20-3
RTECS #:OJ0525000
= Wt:2.86
OSHA PEL:50 MG/M3;10 PPM
ACGIH TLV:52 MG/M3;10 PPM
ACGIH STEL:79 MG/M3;15 PPM
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:LIGHT AROMATIC SOLVENT NAPHTHA (PETROLEUM)
CAS:64742-95-6
RTECS #:WF3400000
Minumum % Wt:20.
Maxumum % Wt:30.
Name:METHYL AMYL KETONE
CAS:110-43-0
RTECS #:MJ5075000
Minumum % Wt:30.
Maxumum % Wt:40.
OSHA PEL:465 MG/M3;100 PPM
ACGIH TLV:233 MG/M3;50 PPM
Name:POLYURETHANE ACCELERATOR
Minumum % Wt:40.
Maxumum % Wt:50.
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: EYE- IRRITATION, MAY CAUSE
INJURY. SKIN- MAY CAUSE BURNS. INGESTION: IRRITATION, MAY CAUSE
MUCASAL DAMAGE. INHALATION:CAN CAUSE IRRITATION TO THE UPPER
RESPIRATORY TRACT, NASAL PASSAGES & THROA T. CHRONIC:PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE, LIVER AND KIDNEY DAMAGE.
Explanation of Carcinogenicity:THIS PRODUCT HAS NOT BEEN TESTED AS A
WHOLE FOR CARCINOGENICITY.
Effects of Overexposure:EYE CONTACT: IRRITATION. WILL INJURE EYE TISSUE
IF NOT REMOVED PROMPYLY. SKIN CONTACT: CONTAINS CORROSIVE
MATERIAL. MAY CAUSE BURNS TO THE SKIN. INHALATION: CORROSIVE
IRRITANT. CAN CAUSE IRRITATION TO THE UPPER RESPIRATORY TRACT AND
MUCOUS MEMBRANES OF THE NASAL PASSAGES AND THROAT. MAY CAUSE
HEADACHE, NAUSEA, COUGHING AND DIZZINESS. INGESTION: MAY CAUSE
MUCOSAL DAMAGE. CHRONIC EFFECTS: REPORT S HAVE ASSOCIATED REPEATED
AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE, LIVER AND KIDNEY DAMAGE.
Medical Cond Aggravated by Exposure:ASTHMA AND OTHER RESPIRATORY
AILMENTS; SKIN ALLERGIES AND ECZEMA; CHEMICAL SENSITIZATION.
======================= First Aid Measures =======================
First Aid:EYE CONTACT: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING
WATER FOR AT LEAST 15 MINUTES WHILE LIFTING EYELIDS. TAKE TO A
PHYSICIAN FOR MEDICAL TREATMENT. SKIN CONTACT: WASH AFFECTED AREAS
WITH S OAP AND WATER. REMOVE CONTAMINATED CLOTHING AND WASH BEFORE
REUSE. CONSULT A PHYSICIAN IF IRRITATION DEVELOPS OR PERSISTS.
INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP WARM
AND QUIET. NOTIFY A PHYSICIAN. INGESTION: IF SWALLOWED, CALL A
PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point:=38.9C, 102.F
Lower Limits:.9
Upper Limits:6.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT INCLUDING
SELF-CONTAINED BREATHING APPARATUS SHOULD BE WORN. KEEP CONTAINERS
TIGHTLY CLOSED. ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS
AND OPEN FLAMES.
Unusual Fire/Explosion Hazard:CLOSED CONTAINER MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT. NEVER USE WELDING OR CUTTING TORCH ON OR NEAR
PRODUCT CONTAINER (EVEN EMPTY) BECAUSE PRODUCT (EVEN RESIDUE CAN
IGNITE EXPOSIVELY. DURING A F IRE, IRRITATION AND HIGHLY TOXIC
GASES (SEE REACTIVITY DATA) AND SMOKE
================== Accidental Release Measures ==================
Spill Release Procedures:EVCUATE ALL NON-ESSENTIAL PERSONNEL AND REMOVE
ALL SOURCES OF IGNITION (FLAMES, HOT SURFACES, ELECTRICAL, STATIC
AND FRICTIONAL SPARKS). VENTILATE AREA. EQUIP CLEAN-UP CREW WITH
APPROPRIATE PROTECTIVE EQUIPMENT, AVOID BREATHING VAPORS. AVOID
SKIN CONTACT. NOTIFY APPROPRIATE AUTHORITIES IF NECESSARY. CONTAIN
AND REMOVE WITH INERT ABSORBENT AND NONSPARKING TOOLS.
====================== Handling and Storage ======================
Handling and Storage Precautions:PRECAUTIONS MUST BE TAKEN SO THAT
PERSONS HANDLING THIS PRODUCT DO NOT BREATHE THE VAPORS OR HAVE IT
CONTACT THE EYES OR SKIN. IN SPRAY OPERATIONS, PROTECTION MUST BE
AFFORDED AGAINST EXPOSURE TO BOTH VAPOR AND SPRAY MIST, CAN CAUSE
IRRITATION TO EYES, SKIN, NOSE AND THROAT. AVOID CONTACT WITH EYES
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE, DO NOT WELD, HEAT OR
EXPOSE TO SPARKS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:A RESPIRATOR THAT IS RECOMMENDED OR APPROVED FOR
USE IN ORGANIC VAPOR CONTAINING ENVIRONMENTS MAY BE NECESSARY. IN
SPRAY APPLICATIONS, AN ORGANIC VAPOR/PARTICULATE RESPIRATOR OR
AIR-SUPPLIED UNIT IS N ECESSARY. TAKE INTO ACCOUNT OTHER MATERIALS
BEING USED CONCURRENTLY, THE TYPE OF APPLICATION AND ENVIRONMENTAL
CONCENTRATIONS WHEN SELECTING RESPIRATOR.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
VOLUME AND PATTERN TO KEEP THE AIR CONTAMINANT CONCENTRATION BELOW
CURRENT APPLICABLE
Protective Gloves:CHEMICAL RESISTANT GLOVES ARE
REQUIRED(NEOPRENE,NITRILE OR PVC),
Eye Protection:USE SAFETY EYEWEAR WITH SPLASH GUARDS OR SIDE SHIELDS.
Other Protective Equipment:EDUCATE AND TRAIN EMPLOYEES IN THE SAFE USE
OF THIS PRODUCT. OTHER SKIN COVERING SUCH AS AN APRON OR CHEMICAL
SUIT MAY BE NEEDED TO PROTECT AGAINST SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING, AVOID PROLONGED
OR REPEATED CONTACT WITH SKIN. SAFETY SHOWERS AND EYE WASH STATION
SHOULD BE AVAILABLE.
Supplemental Safety and Health
CONTACT LENS SHOULD NOT BE WORN. OBSERVE OSHA REGULATION FOR RESPIRATOR
USE (29 CFR 1910.134).
================== Physical/Chemical Properties ==================
HCC:F3
Boiling Pt:B.P. Text:295.0F-429.0F
Vapor Pres:2.14
Vapor Density:4.80
Spec Gravity:.85G
VOC Pounds/Gallon:501
VOC Grams/Liter:4.18
Evaporation Rate & Reference:.400 (N-DUTYL ACETATE=1)
Solubility in Water:REACTS SLOWLY WITH WATER
Appearance and Odor:CLEAR LIQUID SOLVENT ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, STRONG ACIDS.
Stability Condition to Avoid:HEATING TO DECOMPOSITION.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING. FUMES MAY CONTAIN THE
FOLLOWING: CARBON MONOXIDE, CARBON DIOXIDE AND OTHER TOXIC VAPORS
DEPENDING UPON THE TEMPERATURE REACHED.
==================== Disposal Considerations ====================
Waste Disposal Methods:RECYCLE, FUEL BLEND OR INCINERATE. DISPOSE OF
IN ACCORDANCE WITH APPLICABLE LAWS AND REGULATIONS. IT IS THE
RESPONSIBILITY OF THE OWNER OF THE WASTE TO DISPOSE OF IT PROPERLY.
LABORATORY ANALYSIS IS RECOMMENDED TO PROFILE THE WASTE FOR PROPER
DISPOSAL DETERMINATION. U.S. E.P.A. WASTE NUMBER AND DE SCRIPTION:
D001 WASTE PAINT.
=================== MSDS Transport Information ===================
Transport Information:PSN: PAINT, 3, UN1263, III. LABEL: FLAMMABLE
LIQUID.
===================== Regulatory Information =====================
SARA Title III Information:THIS PRODUCT CONTAINS NAPHTHALENE, CAS #
91-20-3 (2.863% WT), AND IS SUBJECT TO THE REPORTING REQUIREMENT
OF SEC 313 ( 40 CFR 372).
Federal Regulatory Information:THE INGREDIENTS OF THIS PRODUCT ARE ON
THE TSCA INVENTORY.
======================= Other Information =======================
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|