=====================  Product Identification  =====================

MSDS NAME:MS-660G BASE COMPONENT
NIIN:01-397-3987
Status Code:A
MSDS Number: CLFMY
=== Responsible Party ===
Company:AMERICAN SAFETY TECHNOLOGIES INC
Address:565 EAGLE ROCK AVE
City:ROSELAND
State:NJ
ZIP:07068
Country:US
Info Phone Num:973-403-2600
Emergency Phone Num:1-800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:88444
=== Contractor Identification ===
Company:AMERICAN SAFETY TECHNOLOGIES INC
Address:565 EAGLE ROCK AVE
Box:City:ROSELAND
State:NJ
ZIP:07068
Country:US
Phone:973-403-2600
CAGE:88444

=============  Composition/Information on Ingredients  =============

Name:EPOXY RESIN
Minumum % Wt:10.
Maxumum % Wt:15.

Name:1-ETHOXY-2-PROPANOL
CAS:1569-02-4
RTECS #:UB5250000
= Wt:4.

Name:METHYL AMYL KETONE
CAS:110-43-0
RTECS #:MJ5075000
< Wt:2.
OSHA PEL:465 MG/M3;100 PPM
ACGIH TLV:233 MG/M3;50 PPM

Name:ALUMINO SILICATE MINERAL
Minumum % Wt:5.
Maxumum % Wt:10.

Name:BARIUM SULFATE
CAS:7727-43-7
RTECS #:CR0600000
Minumum % Wt:10.
Maxumum % Wt:25.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

Name:ALUMINUM OXIDE
CAS:1344-28-1
RTECS #:BD1200000
Minumum % Wt:40.
Maxumum % Wt:50.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EYES: IRRITANT. AGGREGATE MAY CAUSE
    INJURY.SKIN: MAY CAUSE MODERATE IRRITATION AND SENSITIZATION.
    INHALATION: VAPORS MAY CAUSE HEADACHES, NAUSEA. DIZZINESS AND
    RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION. SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY. ECZEMA AND OTHER SKIN
    CONDITIONS.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
    MINUTES. GET MEDICAL ATTENTION.SKIN: WASH CONTACT AREA WITH MILD
    SOAP AND WATER FOR 15 MINUTES.INHALATION: REMOVE TO FRESH AIR. IF
    BREATHING  HAS STOPPED ADMINISTER ARTIFICIAL RESPIRATION AND SEEK
    MEDICAL ATTENTION.INGESTION: DO NOT INDUCE VOMITING (CONTAINS
    SOLVENT). GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=38.6C, 101.4F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:1.62
Upper Limits:11.8
Extinguishing Media:DRY CHEMICAL AND CHEMICAL FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
    COMPLETE PERSONAL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE (DUE TO
    BUILD UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE SPILL
    ABSORB WITH INERT MATERIAL AND COLLECT FOR DISPOSAL FLUSH
    CONTAMINATED AREA WITH WATER.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID ALL PERSONAL CONTACT. DO NOT
    EXCEED 110F/43 C  IN STORAGE AREA.
Other Precautions:A SAFETY SHOWER EYE WASH FACILITY SHOULD BE AVAILABLE
    TO EMPLOYEES. CONTAMINATED CLOTHING SHOULD BE REMOVED IMMEDIATELY
    AND THOROUGHLY LAUNDERED BEFORE REUSE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
    VAPOR CARTRIDGE IF REQUIRED.
Ventilation:EXPLOSION PROOF MECHANICALVENTILATION AND LOCAL EXHAUST
    RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL SPLASH PROOF GOGGLES.
Other Protective Equipment:IN OPERATIONS WHERE CONTACT MAY
    OCCUR.COVERALLS, APRON AND IMPERVIOUS FOOT COVERING ARE
    RECOMMENDED.
Work Hygienic Practices:NONE
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

Boiling Pt:=116.1C, 240.9F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Pres:8MMHG@68F 20 C
Vapor Density:31(AIR=1)
Spec Gravity:23
Evaporation Rate & Reference:0.7 (BUTYL ACETATE=1)
Solubility in Water:SLIGHT
Appearance and Odor:PIGMENTED VISCOUS LIQUID. MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
    ALDEHYDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS PRODUCT IF DISPOSED AS SHIPPED, MEETS EPA
    CRITERIA OF A HAZARDOUS WASTE AS SPECIFIED IN 40 CFR 261 ON THE
    BASES OF ITS IGNITABILITY DISPOSE  OF IN A LICENSED HAZARDOUS WASTE
    FACILITY IN ACCORDANC E WITH APPLICABLE LAWS.

===================  MSDS Transport Information  ===================

Transport Information:DOT SHIPPING CLASSIFICATION (49 CFR 172.101):
    PAINT, 3, UN1263, III.

=====================  Regulatory Information  =====================

SARA Title III Information:SECTION 313 SUPPLIER INFORMATION: THIS
    PRODUCT CONTAINS THE FOLLOWING CHEMICAL(S) SUBJECT TO THE REPORTING
    REQUIREMENTS OF SECTION 313 OF THE EMERGENCY PLANNING AND COMMUNITY
    RIGHT-TO-KNOW ACT OF 1986  AND OF 40 CFR 372. THIS INFORMATION MUST
    BE INCLUDED IN ALL MSDS'S THAT ARE COPIED AND DISTRIBUTED FOR THIS
    MATERIAL.  CHEMICAL NAME:  NONE.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***