=====================  Product Identification  =====================

MSDS NAME:MS-7C, MS-10C HARDENER COMPONENT
NIIN:01-397-3986
Status Code:A
MSDS Number: CLFNC
=== Responsible Party ===
Company:AMERICAN SAFETY TECHNOLOGIES INC
Address:565 EAGLE ROCK AVE
City:ROSELAND
State:NJ
ZIP:07068
Country:US
Info Phone Num:973-403-2600
Emergency Phone Num:1-800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:88444
=== Contractor Identification ===
Company:AMERICAN SAFETY TECHNOLOGIES INC
Address:565 EAGLE ROCK AVE
Box:City:ROSELAND
State:NJ
ZIP:07068
Country:US
Phone:973-403-2600
CAGE:88444

=============  Composition/Information on Ingredients  =============

Name:POLYAMIDE/EPOXY ADDUCT
CAS:68424-41-9
Code:F
Minumum % Wt:60.
Maxumum % Wt:80.

Name:AMIDOAMINE RESIN
CAS:68443-08-3
Code:F
Minumum % Wt:5.
Maxumum % Wt:10.

Name:1-METHOXY-2-PROPANOL
CAS:107-98-2
RTECS #:UB7700000
Minumum % Wt:20.
Maxumum % Wt:35.
ACGIH TLV:369 MG/M3;100 PPM
ACGIH STEL:553 MG/M3;150 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EYES: CAUSES SEVERE IRRITATION OR
    BURNS.  SKIN: CAUSES SEVERE IRRITATION OR BURNS.  INHALATION: MAY
    CAUSE UPPER RESPIRATORY TRACT IRRITATION. INGESTION: MAY CAUSE
    BURNS OF MOUTH AND THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA AND OTHER SKIN
    CONDITIONS.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
    MINUTES. GET MEDICAL ATTENTION.SKIN: WASH CONTACT AREA WITH MILD
    SOAP AND WATER.INHALATION: REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST
    CONSULT  A PHYSICIAN.INGESTION: DO NOT INDUCE VOMITING. IF
    CONSCIOUS , GIVE LARGE QUANTITIES OF WATER TO DILUTE. GET MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:=34.4C, 94.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:1.5
Upper Limits:10.9
Extinguishing Media:DRY CHEMICAL, CHEMICAL FOAM, CARBON DIOXIDE OR
    WATER.
Fire Fighting Procedures:WEAR COMPLETE PERSONAL PROTECTIVE EQUIPMENT
    INCLUDING SELF CONTAINED BREATHING APPARATUS WHERE POTENTIAL FOR
    EXPOSURE TO VAPORS OR PRODUCTS OF COMBUSTION EXISTS.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
    BE TOXIC.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. DIKE SPILL.
    ABSORB WITH INERT MATERIAL AND COLLECT FOR DISPOSAL. FLUSH
    CONTAMINATED AREA WITH DILUTE (5%) ACETIC ACID AND COLLECT RINSAFE
    FOR DISPOSAL.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
    VAPOR CARTRIDGE IF REQUIRED.
Ventilation:EXPLOSION PROOF MECHANICALVENTILATION AND LOCAL EXHAUST
    RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL SPLASH PROOF GOGGLES.
Other Protective Equipment:COVERALLS, APRON AND IMPERVIOUS FOOT
    COVERING ARE RECOMMENDED.
Work Hygienic Practices:NONE
Supplemental Safety and Health
A SAFETY SHOWER AND EYE WASH FACILITY SHOULD BE AVAILABLE TO EMPLOYEES.
    IMMEDIATELY REMOVE AND THOROUGHLY LAUNDER CONTAMINATED CLOTHING
    BEFORE REUSE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:=120.C, 248.F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Pres:12.5MMHG
Vapor Density:3.12
Spec Gravity:0.96
Evaporation Rate & Reference:0.83 (BUTYL ACETATE=1)
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:AMBER LIQUID, SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    ALDEHYDES AND OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS PRODUCT., IF DISPOSED AS SHIPPED, MEETS EPA
    CRITERIA OF A HAZARDOUS WASTE AS SPECIFIED IN 40 CFR 261 ON THE
    BASES OF ITS IGNITABILITY. DISPOSE OF IN A LICENSED HAZARDOUS WASTE
    FACILITY IN ACCORDA NCE WITH APPLICABLE LAWS.

===================  MSDS Transport Information  ===================

Transport Information:DOT SHIPPING CLASSIFICATION (49 CFR 172.101):
    PAINT, 3, UN1263, III.

=====================  Regulatory Information  =====================

SARA Title III Information:SECTION 313 SUPPLIER INFORMATION: THIS
    PRODUCT CONTAINS THE FOLLOWING CHEMICAL(S) SUBJECT TO THE REPORTING
    REQUIREMENTS OF SECTION 313 OF THE EMERGENCY PLANNING AND COMMUNITY
    RIGHT-TO-KNOW ACT OF 1986  AND OF 40 CFR 372. THIS INFORMATION MUST
    BE INCLUDED IN ALL MSDS'S THAT ARE COPIED AND DISTRIBUTED FOR THIS
    MATERIAL.  CHEMICAL NAME:  NONE.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***