=====================  Product Identification  =====================

MSDS NAME:MS-400 UV / MS-660 HARDENER COMPONENT
NIIN:01-397-3911
Status Code:A
MSDS Number: CLFMW
=== Responsible Party ===
Company:AMERICAN SAFETY TECHNOLOGIES INC
Address:565 EAGLE ROCK AVE
City:ROSELAND
State:NJ
ZIP:07068
Country:US
Info Phone Num:973-403-2600
Emergency Phone Num:1-800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:88444
=== Contractor Identification ===
Company:AMERICAN SAFETY TECHNOLOGIES INC
Address:565 EAGLE ROCK AVE
Box:City:ROSELAND
State:NJ
ZIP:07068
Country:US
Phone:973-403-2600
CAGE:88444

=============  Composition/Information on Ingredients  =============

Name:AMINE RESIN
Minumum % Wt:75.
Maxumum % Wt:100.

Name:HYDROXYLATED AMINE
CAS:90-72-2
Code:F
RTECS #:SN3500000
Minumum % Wt:10.
Maxumum % Wt:25.

Name:AMORPHOUS SILICA
Minumum % Wt:5.
Maxumum % Wt:10.

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EYES: CAUSES SEVERE IRRITATION OR
    BURNS.  SKIN: CAUSES SEVERE IRRITATION OR BURNS.  INHALATION: MAY
    CAUSE UPPER RESPIRATORY TRACT IRRITATION. INGESTION: MAY CAUSE
    BURNS OF MOUTH AND THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY ECZEMA AND OTHER SKIN
    CONDITIONS.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
    MINUTES GET MEDICAL ATTENTION.SKIN: REMOVE CONTAMINATED CLOTHING.
    WASH CONTACT AREA WITH MILD SOAP AND WATER FOR 15
    MINUTES.INHALATION: REMOV E TO FRESH AIR. IF SYMPTOMS PERSIST
    CONSULT A PHYSICIAN.INGESTION: DO NOT INDUCE VOMITING. IF CONSCIOUS
    GIVE LARGE QUANTITIES OF WATER TO DILUTE GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=110.C, 230.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:DRY CHEMICAL, CHEMICAL FOAM, CARBON DIOXIDE OR
    WATER.
Fire Fighting Procedures:WEAR SELFCONTAINED BREATHING APPARATUS AND
    COMPLETE PERSONAL PROTECTIVE EQUIPMENT WHERE POTENTIAL FOR EXPOSURE
    TO VAPORS OR PRODUCTS OF COMBUSTION EXISTS.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
    BE TOXIC.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB WITH INERT MATERIAL AND COLLECT FOR
    DISPOSAL. FLUSH CONTAMINATED AREA WITH DILUTE(5%) ACETIC ACID AND
    COLLECT RINSAFE FOR DISPOSAL.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID ALL PERSONAL CONTACT DO NOT
    EXCEED 110 F/43 C IN STORAGE AREA. GROUND AND BOND METAL CONTAINERS
    FOR LIQUID TRANSFER TO AVOID STATIC SPARKS.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
    VAPOR CARTRIDGE IF REQUIRED.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS RUBBER OR PLASTIC GLOVES.
Eye Protection:CHEMICAL SPLASH PROOF GOGGLES.
Other Protective Equipment:IN OPERATIONS WHERE CONTACT MAY OCCUR,
    COVERALLS, APRON AND IMPERVIOUS FOOT COVERING ARE RECOMMENDED.
Work Hygienic Practices:NONE
Supplemental Safety and Health
A SAFETY SHOWER AND EYE WASH FACILITY SHOULD BE AVAILABLE TO EMPLOYEES.
    IMMEDIATELY REMOVE AND THOROUGHLY LAUNDER CONTAMINATED CLOTHING
    BEFORE REUSE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Spec Gravity:090
Evaporation Rate & Reference:(BUTYL ACETATE=1)
Solubility in Water:SLIGHT
Appearance and Odor:YELLOW PAS	AMMONIACAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    ALDEHYDES AND OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

===================  Toxicological Information	===================

Toxicological Information:METHYL ISOBUTYL KETONE: LD50 10 G/KG (DER.
    RAB.) LC50 4000 PPM (INHALE.RAT)  PROPYLENE GLYCOL: LD50 12G/KG
    (DERMAL RAB.)  LC50 3000 PPM (INHALE. RAT)	TITANIUM DIOXIDE:  LD50
    10G/KG (DERMAL RABBIT),   LC50 6820PPM (INHALE, RAT)  XYLENE:  LD50
    3.9G/KG (DERMAL, RABBIT)  LC50 6700PPM (INHALE, RAT)  EPOXY RESIN: 
    LD50 20.0G/KG (DERMAL, RABBIT)

=====================  Ecological Information  =====================

Ecological:EPA WAST NO.: D001

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS PRODUCT. IF DISPOSED AS SHIPPED. IS NOT A
    HAZARDOUS WASTE AS SPECIFIED IN 40 CFR 261 CONSULT STATE OR LOCAL
    OFFICIALS FOR PROPER DISPOSAL METHOD.

===================  MSDS Transport Information  ===================

Transport Information:DOT:  PAINT,  DOT:  FLAMMABLE  UN#  1263

=====================  Regulatory Information  =====================

SARA Title III Information:ALL INGREDIENTS ARE ON TSCA INVENTORY OR ARE
    EXEMPT.  (SARA, CERCLA, HAPS) TOXIC CHEMICAL SUBJECT TO REPORTING
    REQUIRMENTS OF SARA AND CERCLA (40 CFR 302, 355, 372) OR HAPS (40
    CFR 63)
State Regulatory Information:CALIFORNIA PROPOSITION 65:  WARNING!  THIS
    PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO
    CAUSE CANCER.  # CALIF. TITLE 26: 22-12000 (PROP 65).    WARNING! 
    THIS PRODUCT CONTAINS A CH EMICAL KNOWN TO THE STATE OF CALIFORNIA
    TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.	1) ALUMINO
    SILICATE  2) XYLENE  3) EPOXY RESIN  4) MALAMINE FORMALDEHYDE RESIN

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***