=====================  Product Identification  =====================

MSDS NAME:TURCO 6813E, M1604
NIIN:01-441-6143
Status Code:A
MSDS Number: CLFWH
=== Responsible Party ===
Company:TURCO PRODUCTS, INC. DIVISON OF ELF ATOCHEM NORTH AMERICA
Address:2000 MARKET ST
City:PHILADELPHIA
State:PA
ZIP:19103-3222
Country:US
Info Phone Num:215-419-7890
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:61102
=== Contractor Identification ===
Company:TURCO PRODUCTS, INC. DIVISON OF ELF ATOCHEM NORTH AMERICA
Address:2000 MARKET ST
Box:City:PHILADELPHIA
State:PA
ZIP:19103-3222
Country:US
Phone:215-419-7890
CAGE:61102

=============  Composition/Information on Ingredients  =============

Name:BENZYL ALCOHOL
CAS:100-51-6
RTECS #:DN3150000
Minumum % Wt:30.
Maxumum % Wt:60.

Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Minumum % Wt:25.
Maxumum % Wt:45.

Name:LINEAR ALKYL BENZENE
CAS:68648-87-3
Code:F
Minumum % Wt:1.
Maxumum % Wt:10.

Name:AMMONIA
CAS:7664-41-7
RTECS #:BO0875000
Minumum % Wt:1.
Maxumum % Wt:10.
OSHA PEL:35 MG/M3;50 PPM
ACGIH TLV:17 MG/M3;25 PPM
ACGIH STEL:24 MG/M3;35 PPM
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:INHALATION AND SKIN CONTACT ARE
    EXPECTED TO BE  THE PRIMARY ROUTES OF OCCUPATIONAL EXPOSURE TO THIS
    MATERIAL, BASED ON SINGLE EXPOSURE ANIMAL TESTS, THIS MATERIAL IS
    CONSIDERED TO BE PRACTICALLY NON-T OXIC IF SWALLOWED OR ABSORBED
    THROUGH SKIN, SLIGHTLY TOXIC IF INHALED , SLIGHTLY IRRITATING TO
    EYES AND MODERATELY IRRITATING TO SKIN.
Effects of Overexposure:CONTACT WITH LIQUID TO EYES MAY PRODUCE SEVERE
    IRRITATION AND OVEREXPOSURE TO VAPOR IS IRRITATING, CASUING
    STINGING AND TEARING. REPEATED OR PROLONGED CONTACT WITH SKIN MAY
    CAUSE MODERATE IRRITATION A ND, IN A SMALL PERCENTAGE OF THE
    POPULATION, PRODUCE DELAYED CONTACT SENSITIZATION CAUSING SYMPTOMS
    OF ALLERGIC REACTION INCLUDING SWELLING AND RASHES.

=======================  First Aid Measures  =======================

First Aid:HOLD EYELIDS OPEN AND FLUSH WITH A STEADY, GENTLE STREAM OF
    WATER FOR 15 MINUTES, GET MEDICAL ATTENTION. SKIN, IMMEDIATELY WASH
    WITH SOAP AND PLENTY OF WATER. GET MEDICAL ATTENTION. SWALLOWED,
    INDUCE  VOMITING AS DIRECTED BY MEDICAL PERSONNEL, GET MEDICAL
    ATTENTION. INHALED, REMOVE VICTIM TO FRESH AIR. GET MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CALC
Flash Point:=93.3C, 200.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:USE WATER FOG, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONTAINERS EXPOSED TO
    FIRE. FIRE FIGHTERS AND OTHERS WHO MAY BE EXPOSED TO PRODUCTS OF
    COMBUSTION SHOULD WEAR FULL FIRE FIGHTING TURN OUT GEAR.
Unusual Fire/Explosion Hazard:CONTAINER MAY EXPLODE IF HEATED DUE TO
    RESULTING PRESSURE RISE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL. STOP LEAK AT SOURCE IF THIS CAN
    BE DONE SAFELY. VENTILATE AREA. ABSORB REMAINING LIQUID ONTO INERT
    ABSORBENT AND PLACE IN DOT APPROVED DRUMS FOR DISPOSAL. WASH AREA
    WITH WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT GET IN EYES, ON SKIN OR
    CLOTHING. AVOID BREATHING VAPOR OR MIST. KEEP CONTAINER CLOSED. USE
    ONLY WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING.
    STORE IN A COOL, DRY PLACE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OBSERVE RESPIRATOR USE LIMITATIONS SPECIFIED BY
    NIOSH OR THE MANUFACTURER.
Ventilation:PROVIDE VENTILATION IF NECESSARY TO MINIMIZE EXPOSURES.
Protective Gloves:NATURAL RUBBER OR NEOPRENE GLOVES.
Eye Protection:WEAR CHEMICAL GOGGLES.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F7
Boiling Pt:=93.3C, 200.F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Spec Gravity:1.O2
pH:10.4
Solubility in Water:EMULSIFIES
Appearance and Odor:PINK EMULSION

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ACIDS AND OXIDIZERS. CONTAINS ORGANIC AMINE
    COMPOUNDS. NITRILE BASED MATERIALS SHOULD NOT BE ADDED DUE TO
    POSSIBLE NITROSOAMINE FORMATION.
Stability Condition to Avoid:THIS MATERIAL IS CHEMICALLY STABLE UNDER
    NORMAL AND ANTICIPATED STORAGE AND HANDLING CONDITIONS.
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN COMPOUNDS.
Conditions to Avoid Polymerization:IS NOT KNOWN TO OCCUR.

===================  Toxicological Information	===================

Toxicological Information:WHICH PRODUCED SIGNIFICANT ADVERSE EFFECTS IN
    THE MOTHER, DECREASED LITTER SIZES, POSTNATAL WEIGHT GAIN AND
    INCREASES IN PUP DEATHS WERE OBSERVED IN RATS WHEN EXPOSED ORALLY
    FOR TWO GENERATIONS. NO GE NETIC CHANGES WERE OBSERVED IN STANDARD
    TESTS USING BACTERIA, ANIMAL CELLS AND WHOLE ANIMALS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RECOVER, RECLAIM OR RECYCLE WHEN PRACTICAL.
    DISPOSE OF IN ACCORDANCE  WITH FEDERAL, STATE AND LOCAL
    REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:IF >5135 POUNDS OF THIS PRODUCT IS IN ONE
    CONTAINER THE "RQ" IS EXCEEDED. DOT SHIPPING NAME: DRUM:  NONE.
    BULK: RQ, ENVIRONMENTALLY HAZARDOUS SUBSTANCES, LIQUID, N.O.S.
    (ETHYLENE GLYCOL), 9, UN3082, P G-III.

=====================  Regulatory Information  =====================

SARA Title III Information:SARA 313 % BY WT. STONTIUM CHROMATE
    7789-06-2: 30.5%, XYLENE 1330-20-7: 3%. METHYL ISOBUTYL KETONE
    108-10-1: 9%, AND % CHROMIUM VI IN NON-VOLATILES 7440-47-3: 18.1%
Federal Regulatory Information:CLEAN AIR ACT OF 1990 % BY WT. STRONTIUM
    CHROMATE 7789-06-2: 30.5%,	XYLENE 1330-20-7: 3%, METHYL ISOBUTYL
    KETONE 108-10-1: 9%, AND % CHROMIUM VI IN NON-VOLATILES 7440-47-3:
    18.1% TOXIC SUBSTANCE CONT ROL ACT (TSCA) STATUS: THE INGREDIENTS
    OF THIS PRODUCT ARE ON THE TSCA INVENTORY.
State Regulatory Information:PROP 65  BY WT (4) FORMALDEHYDE 50-00-00
    .0220%, TOLUENE 108-88-3 .01933%, BENZENE 71-43-2 .00029%.AND %
    CHROMIUM VI IN NON-VOLATILES 7440-47-3: 18.09715.  IN COMPLAINCE
    WITH THE NEW JERSEY RIGHT TO K NOW LAW INGREDIENTS: PROPRIETARY
    EPOXY RESIN, CYSTALLINE SILICA (QUARTZ) 14808-60-7, STRONTIUM
    CHROMATE 7789-06-2, METHYL AMYL KETONE 110-43-0, XYLENE 1330-20-7,
    METHYL ISOBUTYL KETONE 108-10-1, % CHR OMIUM VI IN NON-VOLATILES
    7440-47-3.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***