=====================  Product Identification  =====================

MSDS NAME:MIL-P-24441/22 F-152 TYPE 111 WHITE COMP A
NIIN:01-350-4743
Status Code:A
MSDS Number: CLFWF
=== Responsible Party ===
Company:AMERON INTL CORP
Address:201 N BERRY ST
City:BREA
State:CA
ZIP:92821-3904
Country:US
Info Phone Num:714-529-1951
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:1L7U2
=== Contractor Identification ===
Company:AMERON INTL CORP
Address:201 N BERRY ST
Box:City:BREA
State:CA
ZIP:92821-3904
Country:US
Phone:714-529-1951
CAGE:1L7U2

=============  Composition/Information on Ingredients  =============

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
< Wt:50.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

Name:BUTYL ALCOHOL
CAS:71-36-3
RTECS #:EO1400000
< Wt:27.6
OSHA PEL:300 MG/M3;100 PPM
ACGIH STEL:C152 MG/M3;C50 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:SILICA (AMORPHOUS)
CAS:7631-86-9
Code:F
< Wt:5.

Name:AMIDO AMINE RESIN
CAS:68443-08-3
Code:F
< Wt:5.

Name:ALUMINUM HYDROXIDE
CAS:21645-51-2
RTECS #:BD0940000
< Wt:5.

Name:POLYAMIDE ADDUCT RESIN
< Wt:20.

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:DERMAL. RABBIT; INHALATION, RAT;
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:NONE
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: SEVERE IRRITANT. SEVERE BURNS.INHALATION:
    SEVERE IRRITANT.DELAYED LUNG INJURY. EYES: SEVERE IRRITANT.
    INGESTION: HARMFUL IF SWALLOWED. CAN CAUSE BURNS.
Medical Cond Aggravated by Exposure:KIDNEYS. LIVER. SKIN. EYES.
    RESPIRATORY. ALLERGIES. LUNGS.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING SEE
    PHYSICIAN.SKIN: WASH THOROUGHLY WITH SOAP AND WATER. CONSULT
    PHYSICIAN IF IRRITATION PERSISTS.EYES: FLUSH WITH PLENTY OF WATER
    FOR AT LEAST 15 MI NUTES AND GET MEDICAL ATTENTION.INGESTION: DRINK
    1 OR 2 GLASSES OF WATER TO DILUTE. CONSULT PHYSICIAN OR POISON
    CONTROL CENTER IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=35.6C, 96.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:1.4%
Upper Limits:11.2%
Extinguishing Media:FOAM CO2 DRY CHEMICAL.
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT, SELF-CONTAINED
    BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT AND PRESSURE BUILD UP.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    BREATHING VAPORS. VENTILATE AREA. USE ABSORBENT, INERT CLEANUP
    MATERIALS. (DO NOT USE SAWDUST.) REMOVE ABSORBENT MATERIAL WITH
    NON-SPARKING TOOLS.PLACE IN SEPARAT E CONTAINER.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP  CONTAINER CLOSED, UPRIGHT WHEN
    NOT IN USE.STORE IN COOL, DRY, WELL VENTILATED AREA.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH/MSHA CERTIFIED RESPIRATOR.
Ventilation:VENTILATION: PROVIDE SUFFICIENT VENTILATION IN VOLUME AND
    PATTERN TO KEEP AIR CONTAMINANT CONCENTRATIONS BELOW TLV LIMITS.
Protective Gloves:WEAR RESISTANT COVERALLS, GLOVES.
Eye Protection:WEAR SOLVENT RESISTANT GLASSES WITH SPLASH GUARDS OR
    FACE SHIELD.
Other Protective Equipment:USE EXPLOSION AND SPARK PROOF EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
    EATING, SMOKING OR USING TOILET.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:244-244 F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Density:HEAVIER
VOC Pounds/Gallon:340
Evaporation Rate & Reference:IS SLOWER THAN BUTYL
Appearance and Odor:SOLVENT LIQUID.
Percent Volatiles by Volume:52.18

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:(BY FIRE, BURNING OR WELDING): CO,
    CO2. NOX. TOXIC GASES OR FUMES.
Conditions to Avoid Polymerization:WILL NOT OCCUR UNDER NORMAL
    CONDITIONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE IN SEPARATE, APPROPRIATE, CLOSED CONTAINER
    IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE, AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***