=====================  Product Identification  =====================

MSDS NAME:ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN,
NIIN:01-344-5090
Status Code:A
MSDS Number: CLFXP
=== Responsible Party ===
Company:STIC-ADHESIVE PRODUCTS CO, INC
Address:3950 MEDFORD STREET
City:LOS ANGELES
State:CA
ZIP:90063
Info Phone Num:213-268-2956
Emergency Phone Num:999-999-9999
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:DO670
=== Contractor Identification ===
Company:STIC-ADHESIVE PRODUCTS CO, INC
Address:3950 MEDFORD STREET
Box:City:LOS ANGELES
State:CA
ZIP:90063
Phone:213-268-2956
CAGE:DO670

=============  Composition/Information on Ingredients  =============

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
= Wt:21.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

Name:ZINC PHOSPHATE
= Wt:16.

Name:BARIUM METABORATE
= Wt:15.

Name:CHLORENDIC ALKYD
= Wt:35.

Name:PAINT THINNER
CAS:8052-41-3
Code:F
RTECS #:WJ8925000
= Wt:9.
OSHA PEL:2900 MG/M3;500 PPM
ACGIH TLV:525 MG/M3;100 PPM

Name:DRIVERS LEVELING AGENT
CAS:136-52-7
Code:F
= Wt:3.

Name:ANTISKINNING AGENT THIXATROPIC AGENT
= Wt:1.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:INGESTION: KEEP PERSON WARM, QUIET AND
    GET IMMEDIATE MEDICAL ATTENTION. EYE CONTACT: CAUSES SEVERE EYE
    IRRITATION. SKIN CONTACT: CAUSED PRIMARY SKIN IRRITATION. MAY BE
    HARMFUL IF ABSORBED THROUGH THE  SKIN.  INHALATION: VAPOR AND SPRAY
    MIST HARMFUL IF INHALED. VAPOR IRRITATES EYES, NOSE, THROAT. MAY
    IRRITATE LUNGS.  AVOID LONG TERM AND REPEATED CONTACT.  PRODUCT
    CONTAINS TITANIUM DIOXIDE.
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS, AND
    LOSS OF COORDINATION ARE INDICATION THAT SOLVENT LEVELS ARE TOO
    HIGH. REDNESS, ITCHING, BURNING SENSATION AND VISUAL DISTURBANCES
    MAY INDICATE EXCESSIVE  EYE CONTACT, DRYNESS, ITCHING, CRACKING,
    BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED WITH
    EXCESSIVE SKIN CONTACT.

=======================  First Aid Measures  =======================

First Aid:INGESTION: IF SWALLOWED, GIVE 1 OR 2 GLASSES OF WATER, BUT DO
    NOT INDUCE VOMITING. EYE CONTACT: FLUSH EYES IMMEDIATELY WITH
    PLENTY OF WATER FOR AT LEAST 30 MINUTES.  SKIN CONTACT: FLUSH
    IMMEDIATELY WI TH PLENTY OF WATER FOLLOWED BY WASHING WITH SOAP AND
    WATER. INHALATION: IF AFFECTED BY INHALATION OF VAPORS OR SPRAY
    MIST, REMOVE TO FRESH AIR. INGESTION, ANY TYPE OF OVEREXPOSURE OR
    SYMPTOMS OF OVERE XPOSURE OCCURS DURING OR FOLLOWING THE USE OF
    THIS PRODUCT.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=40.6C, 105.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:USE NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
    CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY CHEMICAL, OR UNIVERSAL 
    AQUEOUS FILM FOAMING FOAM) DESIGNED TO EXTINGUISH NFPA CLASS.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY
    MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD UP
    AND POSSIBLE AUTOIGNITION OF EXPLOSION WHEN EXPOSED TO EXTREME
    HEAT. IF WATER IS USED, FO G NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
    FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS, AND OPEN FLAMES. CLOSED
    CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME  HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
    EQUIPPED WITH PROPER RESPIRATORY AND SKIN AND EYE PROTECTION SHOULD
    BE PERMITTED IN THE AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP
    SPILLED MATERIAL WITH  SAWDUST, VERICULITE, OR OTHER ABSORBENT
    MATERIAL AND CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH
    AN APPROVED WASTE MANAGEMENT FACILITY.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEGREES F.
    STORE LARGE QUANTITIES IN BUILDING DESIGNED AND PROTECTED FOR
    STORAGE OF NFPA CLASS IC FLAMMABLE LIQUIDS.
Other Precautions:IF THIS MATERIAL IS PART OF A MULIPLE COMPONENT
    SYSTEM, READ THE MATERIAL SAFETY DATA SHEET(S) FOR THE OTHER
    COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE
    HAZARDS OF ALL OF ITS PART S.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:(NIOSH/MSHA APPROVED AIR PURIFYING OR AIR
    SUPPLIED RESPIRATORS MAY ALSO REDUCE EXPOSURE.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
    VOLUME AND PATTERN.
Protective Gloves:WEAR IMPERMEABLE CLOTHING SUFFICIENT TO COVER EXPOSED
    SKIN SURFACES CONSTRUCTED
Eye Protection:WEAR CHEMICAL TYPE SPLASH GOGGLES OR FULL FACE SHIELD.
Other Protective Equipment:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
    SHOES.
Work Hygienic Practices:NONE
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

Boiling Pt:=154.4C, 310.F
B.P. Text:310-390 DEG F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Pres:2.000 MMHG AT 68 F
Vapor Density:4.9
Spec Gravity:1.62-1.65
Appearance and Odor:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIS, STRONG MINERAL ACIDS, OR STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID CONTACT WITH STRONG ALKALIS, STRONG
    MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL STATE, PROVINCLAL, AND LOCAL ENVIRONMENTAL CONTROL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***