===================== Product Identification =====================
MSDS NAME:ARALDITE AV 1258
NIIN:01-088-7186
MSDS Number: BGLJJ
=== Responsible Party ===
Company:REN PLASTICS (CIBA GEIGY COMPANY)
Address:4917 DAWN AVENUE
City:EAST LANSING
State:MI
ZIP:48823
Info Phone Num:517-351-5900-800-334-9481
Emergency Phone Num:914-347-4700-800-334-9481
Preparer's Name:PETER HENIGE/ALAN TAYLOR
CAGE:LO874
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORPORATION
Address:4917 DAWN AVE
Box:City:EAST LANSING
State:MI
ZIP:48823-5691
Country:US
Phone:517-351-5900
CAGE:02684
Company:REN PLASTICS (CIBA GEIGY COMPANY)
Address:4917 DAWN AVENUE
Box:City:EAST LANSING
State:MI
ZIP:48823
Phone:517-351-5900 800-334-9481
CAGE:LO874
============= Composition/Information on Ingredients =============
Name:ALUMINUM (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt:
Other REC Limits:15 MG/CUM AIR(DUST)
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192
Name:BENTONITE (AS NUISANCE DUST OR PARTICULATES NOT OTHERWISE
REGULATED)
CAS:1302-78-9
RTECS #:CT9450000
Fraction by Wt:
Other REC Limits:10-15MG/CUM AIR DUST
OSHA PEL:15 MG/M3 TOTAL DUST
ACGIH TLV:10 MG/M3 TDUST;8990
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt:
Other REC Limits:
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:SILICA, CRYSTALLINE - QUARTZ
CAS:14808-60-7
RTECS #:VV7330000
Other REC Limits:15 MG/CUM AIR TWA
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293
Name:BARIUM SULFATE
CAS:7727-43-7
RTECS #:CR0600000
Fraction by Wt:
Other REC Limits:15MG/CUM NUISANCE
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:ALUMINUM HYDROXIDE (AS NUISANCE DUST OR PARTICULATES NOT
OTHERWISE REGULATED)
CAS:10043-01-3
RTECS #:BD0940000
Fraction by Wt:
Other REC Limits:10-15MG/CUM AIR DUST
OSHA PEL:15 MG/M3 TOTAL DUST
ACGIH TLV:10 MG/M3 TDUST;8990
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:EPOXY RESIN
CAS:25068-38-6
RTECS #:KC2100000
Fraction by Wt:
Other REC Limits:
OSHA PEL:
ACGIH TLV:
===================== Hazards Identification =====================
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:N/A
Effects of Overexposure:SKIN & EYE IRRITATION & ALLERGIC SKIN &
RESPIRATORY REACTIONS.
Medical Cond Aggravated by Exposure:SKIN:IRRITATION.EYE:IRRITATION
POSSIBLE IN SUSCEPTIBLE INDIVIDUALS.
======================= First Aid Measures =======================
Eyes:IMMED FLUSH EYES W/H*2O FOR 15 MIN.CALL PHYS.SKIN:WASH
W/ SOAP & H*2O REMOVE CONTAM CLOTHING.LAUNER BEFORE REUSE.INGEST:IF
CONSCIOUS GIVE H*2O TO DRINK.DO NOT INDUCE VOMITING CALL
PHYS.INHAL:REMO VE TO FRESH AIR.GIVE O*2&/OR ARTIFICIALRESP. CALL
PHYS. REFER TO PHYS IF ANY QUESTION ABOUT SERIOUSNESS OF ANY
INJURY.
===================== Fire Fighting Measures =====================
Flash Point:APPROX 320F OC
Extinguishing Media:DRY CHEMICAL, CO*2, WATER
Fire Fighting Procedures:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:WARNING COMBUST.SKIN,EYE
IRRITATION:SKIN,RESP,REACT.KEEP AWAY FROM HEAT FLAME.KEEP CONTR
CLOSED.ADEQ VENT.WASH DUST FROM SANDING OR SAWING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APROVED ORGANIC CARTRIDGE RESPIRATOR
Ventilation:GENERAL MECHANICAL & LOCAL EXHAUST IN ACCORDANCE WITH ACGIH
RECOMMENDATIONS.
Protective Gloves:RECOMMENDED
Eye Protection:CHEM WORK GOGGLES,FACESHLD OPTIONAL
Supplemental Safety and Health
INGREDIENT NO.4:30MG/CUM TOTAL DUST IN AIR.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.5-1.55
Evaporation Rate & Reference:NONE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT GRAY PASTE W/SLIGHT, MILD ODOR
Percent Volatiles by Volume:NEGLI
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS,ACIDS & BASES
Stability Condition to Avoid:AVOID EXCESSIVE HEAT FOR LONG PERIODS OF
TIME
Hazardous Decomposition Products:COMBUSTION MAY FORM MAT,SUCH AS CARBON
DIOXIDE,CARBON MONOXIDE.
Conditions to Avoid Polymerization:0001
==================== Disposal Considerations ====================
Waste Disposal Methods:USE APPROVE INCINERATION OR LANDFILL, IF IN
ACCORDANCE W/FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|