===================== Product Identification =====================
MSDS NAME:VARSOL 18 SOLVENT
NIIN:01-088-6264
MSDS Number: BGLJD
=== Responsible Party ===
Company:EXXON COMPANY,U.S.A.
Address:800 BELL ST
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Info Phone Num:713-870-6000
Emergency Phone Num:713-870-6000, CHEMTREC 800-424-9300
CAGE:EO384
=== Contractor Identification ===
Company:EXXON COMPANY U.S.A.
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-656-5949 / 713-656-3424
CAGE:29700
Company:EXXON COMPANY,U.S.A.
Address:800 BELL ST
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-870-6000
CAGE:EO384
============= Composition/Information on Ingredients =============
Name:PETROLEUM HYDROCARBONS
ACGIH TLV:200 PPM (MFR)
Name:1,2,4-TRIMETHYLBENZENE (SARA III)
CAS:95-63-6
RTECS #:DC3325000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:25 PPM
ACGIH TLV:25 PPM; 9394
Name:STODDARD SOLVENTS (TYPE NOT SPECIFIED)
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 0.4%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ETHYL BENZENE (SARA III)
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 0.2%
OSHA PEL:100 PPM/125 STEL
ACGIH TLV:100 PPM/125STEL 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:TLV: 100 PPM BASED ON COMPOSITION
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE-SLIGHTLY IRRITATING BUT DOES NOT
INJURE TISSUE. INHALATION-HIGH VAPOR/AEROSOL CONCENTRATIONS (>1000
PPM) ARE IRRITATING TO THE EYES & RESPIRATORY TRACT.
INGESTION-SMALL AMOUNTS ASPIRATED INTO THE RESPIRATORY SYSTEM
DURING INGESTION MAYCAUSE MILD TO SEVERE PULMONARY INJURY, POSSIBLY
PROGRESSING TO DEATH.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:INHALATION-HIGH VAPOR CONCENTRATIONS MAY CAUSE
HEADACHES, DIZZINESS, ANESTHESIA, DROWSINESS, UNCONSCIOUSNESS AND
OTHER CENTRAL NERVOUS SYSTEM EFFECTS, INCLUDING DEATH.
Medical Cond Aggravated by Exposure:SKIN CONTACT MAY AGGRAVATE AN
EXISTING DERMATITIS CONDITIONS.
======================= First Aid Measures =======================
First Aid:EYE-FLUSH EYES WITH LARGE AMOUNTS OF WATER UNTIL IRRITATION
SUBSIDES. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION. SKIN-FLUSH
WITH LARGE AMOUNTS OF WATER; USE SOAP. REMOVE CONTAMINATED
CLOTHING. INH ALATION-USING PROPER RESPIRATORY PROTECTION, REMOVE
AFFECTED VICTIM FROM EXPOSURE. ADMINISTER CPR IF BREATHING IS
STOPPED. CALL FPR MEDICAL ATTENTION. INGESTION-DO NOT INDUCE
VOMITING. KEEP AT REST.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:100F,38C
Autoignition Temp:Autoignition Temp Text:490F
Lower Limits:2.3
Upper Limits:14.4
Extinguishing Media:USE FOAM, DRY CHEMICAL, OR WATER SPRAY TO
EXTINGUISH FIRE.
Fire Fighting Procedures:USE WATER SPRAY TO COOL FIRE EXPOSED SURFACES
AND TO PROTECT PERSONNEL. ISOALTE "FUEL" SUPPLY FROM FIRE AREA.
Unusual Fire/Explosion Hazard:AVOID SPRAYING WATER DIRECTLY INTO
STORAGE CONTAINER DUE TO DANGER OF BOILOVER. THIS LIQUID IS
VOLATILE AND GIVES OFF INVISIBLE VAPORS.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES. PREVENT ADDITIONAL
DISCHARGE OF MATERIAL. FOR SMALL SPILLS IMPLEMENT CLEANUP
PROCEDURES; FOR LRAGE SPILLS IMPLEMENT CLEANUP PROCEDURES &, IF IN
PUBLIC AREA, KEEP PUBLIC AWA Y & ADVISE AUTHORITIES.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORAGE TEMPERATURE, AMBIENT.
Other Precautions:EMPTY CONTAINERS RETAIN PRODUCT RESIDUE AND CAN BE
DANGEROUS. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC
ELECTRICITY OR OTHER SO URCES OF IGNITION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH.MSHA APPROVED RESPIRATORS MAY BE NECESSARY
TO PREVENT OVEREXPOSURE BY INHALATION.
Ventilation:THE USE OF LOCAL EXHAUST VENTILATION IS RECOMMENDED TO
CONTROL PROCESS EMISSIONS.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:WEAR SAFETY GLASSSES WITH SIDE SHIELDS.
Other Protective Equipment:WEAR LONG SLEEVES.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING.
Supplemental Safety and Health
NONE
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:315F,157C
Melt/Freeze Pt:M.P/F.P Text:-4F,-20C
Vapor Pres:6 MMHG
Vapor Density:3.90
Spec Gravity:0.79
Viscosity:1 CST
Evaporation Rate & Reference:<0.1, N-BUTYL ACETATE=1
Solubility in Water:LESS THAN 0.01
Appearance and Odor:CLEAR COLORLESS LIQUID, HYDROCARBON ODOR.
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
HALOGENS, MOLTEN SULFUR, STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:NONE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:RECOVER BY PUMPING (USE AN EXPLOSION PROOF OR
HAND PUMP) OR WITH A SUITABLE ABSORBENT. CONSULT AN EXPERT ON
DISPOSAL OF RECOVERED MATERIAL & ENSURE CONFORMITY TO LOCAL
DISPOSAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|