=====================  Product Identification  =====================

MSDS NAME:P-702-1,HYDRAZINE DETECTOR PELLET
NIIN:01-089-4443
MSDS Number: BGLJX
=== Responsible Party ===
Company:DYNAMOLD INC
Address:2905 SHAMROCK AVE
City:FORT WORTH
State:TX
ZIP:76107
Country:US
Info Phone Num:817-335-0862
Emergency Phone Num:817-335-0862
CAGE:GO277
=== Contractor Identification ===
Company:DYNAMOLD INC
Address:2905 SHAMROCK AVE
Box:9617
City:FORT WORTH
State:TX
ZIP:76107-1314
Country:US
Phone:817-335-0863/817-335-0862
CAGE:GO277
Company:DYNAMOLD SOLVENTS, INC.
Address:2905 SHAMROCK AVE
Box:9617
City:FORT WORTH
State:TX
ZIP:76107
Country:US
Phone:817-335-0862
CAGE:30256
Company:NO COMPANY NAME LISTED
CAGE:1V478

=============  Composition/Information on Ingredients  =============

Name:NO HAZARDOUS COMPONENTS PER MANUFACTURER

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:NONE NORMALLY REQUIRED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:500F,260C
Extinguishing Media:WATER SPRAY, DRY CHEMICALS, CARBON DIOXIDE.
Fire Fighting Procedures:AS IN ANY FIRE, PREVENT HUMAN EXPOSURE TO
    FIRE, SMOKE, FUMES, OR COMBUSTION PRODUCTS.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:AS THE PELLET IS PLIABLE CURED RUBBER, NO
    SPILLAGE WILL OCCUR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE. AVOID DIRECT
    SUNLIGHT AND LEAVE IN PROTECTIVE ENVELOPE UNTIL USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:NORMAL WORK PLACE VENTILATION IS ADEQUATE.
Protective Gloves:WEAR ONLY TO KEEP HANDS FROM BEING DYED.
Eye Protection:NONE NORMALLY REQUIRED.
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:STANDARD HYGENIC PRACTICES
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Pres:<1
Spec Gravity:1.18
Evaporation Rate & Reference:NIL
Appearance and Odor:ORANGE CIRCULAR PELLET.
Percent Volatiles by Volume:NEGL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AMMONIA, HYDRAZINE, OR TAP WATER, AS COLOR CHANGE WILL OCCUR UPON
    EXPOSURE TO THESE MATERIALS.
Stability Condition to Avoid:FIRE
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:NORMAL WASTE DISPOSAL WITH PAPER REFUSE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***