=====================  Product Identification  =====================

MSDS NAME:EA 9309.3 NA PART B
NIIN:01-115-3616
Kit Part:Y
MSDS Number: BGWJY
=== Responsible Party ===
Company:HYSOL AEROSPACE INC., DIV. THE DEXTER CORP.
Address:2850 WILLOW PASS ROAD
Box:312
City:PITTSBURG
State:CA
ZIP:94565-3237
Country:US
Info Phone Num:510-458-8000
Emergency Phone Num:510-458-8000
CAGE:HYSOL
=== Contractor Identification ===
Company:BOEING HELICOPTERS, DIV OF THE BOEING CO
Address:BOEING CENTER, INDUSTRIAL HWY BLDG 3-25
Box:City:RIDLEY PARK
State:PA
ZIP:19078
Country:US
Phone:215-591-3010
CAGE:77272
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564
Company:HYSOL AEROSPACE & INDUSTRIAL PRODUCTS
Address:2850 WILLOW PASS ROAD
City:PITTSBURG
State:CA
ZIP:94565
Country:US
Phone:415-687-4201 X362 X319
CAGE:HYSOL

=============  Composition/Information on Ingredients  =============

Name:EPOXY RESIN SYSTEM
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: <5%.
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE- MATERIAL MAY CAUSE BURNS TO
    SKIN AND EYES. VAPORS CAN CAUSE SEVERE EYE AND RESPIRATORY TRACT
    IRRITATION. LIQUID CAUSES SEVERE DAMAGE TO MUCOUS MEMBRANES IF
    SWALLOWED. CHRONIC- NONE KNOWN.
Effects of Overexposure:POSSIBLE BURNS TO EYES & SKIN. VAPORS MAY
    IRRITATE UPPER RESPIRATORY TRACT!
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
    DISORDERS MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THE SUBSTANCE.

=======================  First Aid Measures  =======================

First Aid:GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. SKIN:WASH WITH
    SOAP & WATER. EYE:FLUSH WITH WATER FOR 15 MINUTES, HOLDING EYELIDS
    OPEN. INHALED:REMOVE TO FRESH AIR. PROVIDE OXYGEN/CPR IF NEEDED.
    ORAL:GET P ROMPT MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:>148.C, 298.4F
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, OR WATER
    SPRAY, FOAM OR FOG.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
    NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
    FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASES MAY BE
    LIBERATED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
    GLASSES. SCRAPE UP & TRANSFER TO METAL CONTAINER. WIPE UP REMAINING
    RESIDUE W/ SOLVENTS, OBSERVING SOLVENT FLAMMABILITY CAUTIONS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE W/ LABEL
    INSTRUCTIONS. AVOID MIXING RESIN & CURING AGENT IN BATCHES GREATER
    THAN 1 POUND TOTAL. STORE @ RM TEMP(77F) FOR 12MO
Other Precautions:FOLLOW RECOMMENDED CURING SHEDULE. DON'T HEAT MIXED
    ADHESIVE ABOVE 75F UNLESS CURING SURFACES TO BE BONDED. FAILURE TO
    OBSERVE CAUTION MAY RESULT IN EXCESSIVE HEAT BUILD-UP W/ THE
    RELEASE OF TOXIC GAS ES!

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NEEDED W/ GOOD INDUSTRIAL VENTILATION;
    ORGANIC CARTRIDGE RESPIRATOR.WHEN TLV LEVELS EXCEEDED.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN & CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE & BEFORE
    EATING,DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE.
Supplemental Safety and Health
KEY1:N1; PART NINE OF NINE-PART KIT. MFR: 3M, BOSTIK, DOW, PRODUCTS
    RESEARCH AND HYSOL (DEXTER CORP.), SAME NSN.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:=223.C, 433.4F
Vapor Pres:<0.001 MM
Vapor Density:7.6
Spec Gravity:>1.02
Evaporation Rate & Reference:NIL
Solubility in Water:PARTIAL
Appearance and Odor:TRANSPARENT BLUE LIQUID W/ AMMONICAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN; ALDEHYDES,
    ACIDS & UNDETERMINED ORGANICS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
    HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***