MATERIAL SAFETY DATA SHEET
For Coatings Resins and Related Materials
MSDS NUMBER ISSUE DATE SUPERCEDES: PREPARED BY:
MSDS FTR-VALUE 7/24/01 All Previous N/A
Section I - Product & Company Identification
PRODUCT IDENTITY (as used on label and list): FTR-VALUE Insulation
Manufacturer / Distributor EMERGENCY PHONE NUMBER(s)
NAME: Seaman Corporation DAY: 330-262-1111
ADDRESS: 1000 Venture Blvd. NIGHT (CHEMTREC): 800-424-9300
ADDRESS: Wooster, OH 44691 INFORMATION: 330-262-1111
Trade Names or Synonyms: Polyisocyanurate foam insulation HMIS Hazard Codes: none: extreme
CAS Number: Mixture 0 4
D.O.T. Hazard Class: N/A Health: 1
Proper Shipping Name: Insulation Fire: 1
Reactivity: 0
Personal Protection: 1
UN #: N/A
Section II - Hazardous Ingredients
Ingredients Percent C.A.S. Exposure Limits
Material Description by Weight Registry Number ACGIH/TLV OSHA/PEL
Polyisocyanurate Foam N/A NONE NONE < 60
Proprietary Hydrocarbons N/A 1717-00-6 500 <10
Fibrous Glass N/A 65997-17-3 10 <4
Cellulose N/A NONE 10 <26
Section III - Physical Data
Boiling Range: N/A Vapor Density: N/A
Specific Gravity: 2.0 lbs/cu. ft. Solubility in Water: N/A
Volatiles: N/A
Appearance and Odor: Tan core foam with cellulose glass fiber facings; odorless
Section IV - Fire and Explosion Hazard Data
Flash Point: N/A
EXTINGUISHING MEDIA
Foam, dry chemical, carbon dioxide, water fog.
SPECIAL FIREFIGHTING PROCEDURES
Full face self-contained breathing apparatus in conjunction with impervious protective clothing.
UNUSUAL FIRE AND EXPLOSION HAZARDS
None known. Avoid direct contact with flame. Burning foam my emit thick, black toxic smoke.
STORAGE OF MATERIAL: Class 2 Commodity (UFC)
Section V - Toxicological Information
N/A
FTR-VALUE
Page 1 of 3
07-24-01
Section VI - Health Hazard Data
Signs of Overexposure: Acute temporary mechanical irritation of eyes, nose, throat, lungs and possibly skin.
Primary routes of Exposure: Irritation and skin contact
Eyes: Irritation
Skin: Can cause irritation, dermatitis.
First Aid
Inhalation: Leave area to breathe fresh air. Drink water to clear throat and blow nose to remove dust.
Skin: Wash with soap and water.
Eyes: Flush with water for at least 15 minutes or until irritation ceases. If irritation persists, contact a physician.
Section VII - Reactivity Data
Stability: K Unstable K Stable
X
Hazardous Polymerization: K May occur K Will not occur
X
Incompatibility: Acetone, ketone, methyl, ethyl chemical families.
Conditions to Avoid: Will burn if exposed to fire or sufficient heat intensity.
Can release black toxic smoke if ignited.
Hazardous Decomposition Products: Like wood and other organic materials.
Section VIII - Spill or Leak Procedures
Steps to Be Taken in Case Material is Released or Spilled:
Vacuum dust. If sweeping is necessary use a dust suppressant such as water.
Waste Disposal Method:
Dispose of in accordance with federal, state and local regulations.
Section IX - Special Protection Information
Respiratory Protection: A respirator may be used. Breathing dust from this product may cause
irritation to the upper respiratory tract.
Ventilation: Sufficient to keep workroom concentration below TLV.
Ingestion: This product is not intended to be ingested. It may cause irritation to the
gastrointestinal tract.
Eye Protection: Safety glasses with eye shields are recommended.
Other Protective Equipment: Loose-fitting long-sleeved clothing and leather gloves may help
prevent skin irritation.
Section X - Special Precautions
Precautions to be Taken in Handling and Storage: Persons who develop irritation, respiratory problems,
or puffiness around the eyes should be examined by a physician as soon as possible.
Other Precautions: None
FTR-VALUE
Page 2 of 3
07-24-01
Section XI - Regulatory Data
Not completely classified or classifiable.
Section XII - Abbreviations Used
N/A= Information or Data Not Available. OSHA= Occupational Safety and Health Administration
NTP= National Toxicology Program PEL= Permissible Exposure Limit (8-hr. TWA) (OSHA)
IARC= International Agency for Research on Cancer TLV= Threshold Limit Value (8-hr. TWA) (ACGIH)
NIOSH= National Institute of Occupational Safety and Health STEL= Short Term Exposure Limit (15-min TWA) (OSHA)
ACGIH= American Conference of Governmental Industrial Hygienists C= Ceiling Value
Disclaimer
This information is furnished without warranty, representation, or license of any kind, except that this information
is accurate to the best of Seaman Corporation's knowledge, or is obtained from sources believed by Seaman
Corporation to be accurate. No warranty is expressed or implied regarding the accuracy of this information or the
results to be obtained from its use thereof. Seaman Corporation assumes no responsibility for injuries proximately
caused by use of the material if reasonable safety procedures are not followed as stipulated in this Data Sheet.
Additionally, Seaman Corporation assumes no responsibility for injuries proximately caused by abnormal use of
the Material even if reasonable safety procedures are followed. Buyer assumes the risk in its use of the material.
FTR-VALUE
Page 3 of 3
07-24-01
|