M.S.D.S.#00006
MATERIAL SAFETY DATA SHEET Page1 of 2
Page 1 of 2
January 13, 2000
1. Chemical Product and Contact Information
Product Name: Bond-1庐 Primer/Adhesive
Material Safety Sheet Number: 00006
Date of Issue: 12/17/99
Revision Date: 1/13/00
Company Identification: Pentron Clinical Technologies, LLC
P.O. Box 724
Wallingford, CT U.S.A. 06492
Phone: 800-551-0283
203-265-7397
Emergency Information Chemtrec: 800-424-9300
Chemtrec International: 202-483-7616
2. Composition/Information on Ingredients
Chemical characteristics: Methacrylate monomers in Ethanol and/or Acetone
Description: Mixture of PMGDM, a condensation product of PMDA and Glycerol
Dimethacrylate HEMA and TMPTMA in ethanol and/or acetone with
photo initiator, amine accelerator & stabilizer.
Hazardous components:
CAS NR: Name: % R-classification:
Cas. Reg. No. 64-17-5 Ethanol Unknown
Cas. Reg. No. 67-64-1 Acetone Unknown
Cas. Reg. No. N.E. PMGDM Unknown
Cas. Reg. No. 89-32-7 Pyromellitic Dianhydride Unknown
3. Hazard Identification
Those people known to be allergic to methacrylate resins should avoid the use of this product.
4. First Aid Measures
Contact with eyes: Rinse with plenty of water and consult an opthamologist.
Contact with skin: Wash with soap and water.
After ingestion: Seek medical attention immediately.
5. Fire Fighting Measures
Extinguishing media: CO2, water, dry chemical.
Protective equipment: Unknown.
6. Accidental Release Measures
In case of spillage: Absorb with inert material. Collect in closed containers and dispose of as
recommended. Avoid skin contact, wear protective equipment.
Waste Disposal: Incinerate according to Federal, State, and local regulations in an approved
incineration unit, or dispose of in accordance with Federal, State, and local regulations.
7. Handling and Storage
Store material below 80掳F, away from direct sunlight, initiators, oxidizing, and/or reducing agents.
Over time spontaneous polymerization may occur.
8. Exposure Controls/Personal Protection
Respiratory protection: Face mask recommended for prolonged exposure.
Eye protection: OSHA approved goggles.
Protective gloves: Yes.
M.S.D.S.#00006
MATERIAL SAFETY DATA SHEET Page1 of 2
Page 2 of 2
January 13, 2000
9. Physical and Chemical Properties
Appearance: Form: Liquid.
Color: Slight yellow, clear.
Odor: Acetone and/or alcohol-like.
Melting point/melting range: Unknown.
Boiling point: Unknown.
Flash point: About 101掳 C.
Autoigniton temperature: 360掳 C.
Danger of explosion: Unlikely.
Density: < 1.
Vapor Pressure: 184.
Viscosity: Unknown.
pH: Not applicable.
Solubility in/miscibility with:
Water: Yes.
Content of resin: 鈮? 45%.
Organic solvents: 鈮?50%.
Water: 鈮? 5%.
10. Stability and Reactivity
Stability: Stable.
Conditions to avoid: Heat, sparks & open flames.
Incompatibility: Acids, oxidizing agent, alkalis, amines, ammonia and chlorinated compounds.
11. Toxicological Information
Carcinogenicity: None of the components of this material are listed by IARC, NTP, OSHA, or
ACIGH as carcinogens.
TLV: Oral rat 5.2 ml/kg.
Primary Routes of entry: Inhalation, skin, and eyes.
12. Ecological Information
Unknown.
13. Disposal Considerations
Dispose of in accordance with Federal, State, and local regulations.
14. Transport Information
Not classified as dangerous goods.
15. Regulatory information
Unknown.
16. Other Information
Revision Summary: The following were made on January 13, 2000:
Section 9 鈥? Changed pH from unknown to not applicable.
鈥? Changed content of solvents < 45 to content of resin 鈮? 45%
鈥? Added organic solvents >50%; water < 5%.
The information and recommendations set forth herein (hereinafter "information") are presented in good faith and believe to be correct as of the date
hereof. Pentron Clinical Technologies, LLC however, makes no representations as to the completeness or accuracy of this information and supplies it on
the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will Pentron
Clinical Technologies, LLC be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information.
NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICU-
LAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO
WHICH INFORMATION REFERS.
20M 5.02-ART
|