Version No: 01
Date of issue: Date of printing:
09/11/06 09.11.2006
1. Identification of the substance and the company
Product name: N-膰-Fmoc-L-proline
CAS-No: 71989-31-6
EU-No: 276-259-0
REANAL Product Number: 22680
REANAL Finechemical Co.
Company identification:
Address: HUNGARY, H-1147 Budapest, Telepes u. 53.
Tel.: (36-1) 467-7500
Fax.: (36-1) 252-1339
2. Composition / Information on ingredients
Molecular formula: C艊膼H艃脻NO膯
Relative molecular weight: 337.37
3. Hazard statements
Hazard symbols and-signs:
Substance non classified as hazardous according to Directive 67/548/EEC.
4. First aid measures
General:
Remove provided person from the exposed area, if necessary make lay him/her comfortable and loosen tight
clothing. Remove contaminated clothing and shoes, wash contaminated clothing before reuse.
After inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. If not breathing give artificial respiration.
After swallowing:
If swallowed, wash out mouth with water provided person is conscious.
After eye contact:
In case of contact immediately flush eyes with copious amounts of water for at least 15 minutes. Assure adequate
flushing by separeting the eyelid with fingers.
After skin contact:
In case of skin contact, immediately wash skin with soap and copious amounts of water.
Page: 1/3
N-膰-Fmoc-L-proline
5. Fire fighting measures
Noncombustible. Use extinguishing media appropriate to surrounding fire conditions. Use water spray to cool
containers under fire conditions. Emits toxic fumes under fire conditions.
6. Accidental release measures
Close contaminated area. Wear self-contaminated breathing apparatus, rubber boots and heavy rubber gloves
according to degree of contamination. Do not allow contamination to get to drain. Sweep up, place in container
and hold for waste disposal. Ventilate area and wash spill site after material pickup is complete.
7. Handling and storage
Keep containers out of use tightly closed. Store in labelled container, in a cool, dry place.
Storage temperature: 2-8 脟C
8. Exposure controls / Personal protection
Exposure controls:
Protective chlothing should be selected specifically for the working place, depending on concentrations and
quantity of the hazards. Avoid contact with eyes, skin and clothing. Do not breathe dust. When working do not eat
or smoke. Mechanical exhaust is required. Safety shower and eye bath are required. Wash thoroughly after
handling. Take care of bathing facilities with warm water after work.
Personal protective equipment:
Protective clothing.
Eye protect:
Chemical safety goggles.
Hand protect:
Chemical-resistant rubber gloves.
Respiration protection:
Respirator.
Specific control parameters
MAK (mg/m艂):
Page: 2/3
N-膰-Fmoc-L-proline
9. Physical and chemical properties
White powder
Appearance:
117-118
Melting point [脟C]:
10. Stability and reactivity
Incompatibilities:
Strong oxidizing agents.
Decomposition products:
Carbon monoxide, carbon dioxide, Nitrogen oxides, Hydrogen fluoride.
11. Toxicological information
Acute toxicity:
Exposure can cause: nausea, headache and vomiting. Narcotic effect. Powder of material in high concentration
can causes eye and skin irritation. Material is irritating to mucous membranes and upper respiratory tract. May be
harmful if inhaled, swallowed or skin absorption.
12. Ecological information
WGK (German Water Hazard Classification): 0
13. Disposal information
Chemicals must be disposed of in compliance with the respective national regulations.
14. Transport information
Data not yet available.
15. Regulatory information
Safety phrases:
22 Do not breathe dust.
24/25 Avoid contact with skin and eyes.
Labelling according to EC Directives.
16. Other information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a
guide. Reanal shall not be held liable for any damage resulting from handling or from contact.
Page: 3/3
N-膰-Fmoc-L-proline
|