MATERIAL SAFETY DATA SHEET Page 1 of 4
HMIS RATINGS:
Health: 1
Flammability: 2
Reactivity: 0
Personal Protection: G
__________________________________________________________________________________________________
Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Trade Name: DIO-SOLV Emergency Telephone Number: (800)535-5053
Chemical Family: Solvent Degreaser Date Prepared: AUG 20, 2003
Company Identification: ABC COMPOUNDING CO., INC. MSDS Number: IA-4363
P.O. BOX 16247 MFGD. BY: ABC Compounding Co., Inc.
ATLANTA, GA 6970 Jonesboro Rd.
Morrow, Ga. 30260
__________________________________________________________________________________________________
Section 2: COMPOSITION, INFORMATION ON INGREDIENTS
CAS CHEMICAL % BY OSHA PEL/ SARA SARA STATE
NUMBER NAME WGHT. ACGIH TLV 302/304(1)* 313 (2)* INFO(3)(4)
64741-44-2 Mineral Seal Oil < 66.0 400 ppm / NO NO NO
400 ppm
68917-57-7 Orange Terpenes < 30.0 n/e / n/e NO NO NO
* See Section 15 for more information n/e = none established - n/a = not applicable
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION
__________________________________________________________________________________________________
EMERGENCY OVERVIEW
CAUTION. Combustible. Keep away from heat and flame. Harmful if swallowed.
Aspiration hazard. Eye and skin irritant.
__________________________________________________________________________________________________
Primary Route of Entry: Skin contact, inhalation, eye contact
Acute/Potential Health Effects:
EYES: May cause mild eye irritation. Symptoms include stinging, tearing and redness.
SKIN: May cause mild skin irritation. Prolonged or repeated contact may dry the skin.
Symptoms may include redness, burning, drying of skin and skin burns.
INHALATION: Inhalation can cause nose, throat and respiratory tract irritation, coughing
and headache.
INGESTION: Harmful if swallowed. Aspiration hazard. Causes gastrointestinal upset.
MATERIAL SAFETY DATA SHEET Trade Name: DIO-SOLV (I-4363)
Page 2 of 4
MSDS Number: IA-4363
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION - continued:
Chronic / Long Term Effects: No data.
Signs and Symptoms of Overexposure: Prolonged or repeated exposure can cause drying,
defatting and dermatitis of skin.
Target Organ Effects: No data.
Reproductive/Developmental Information: No data.
Carcinogenic Information: This material is not listed as a carcinogen by IARC, NTP or
OSHA.
__________________________________________________________________________________________________
Section 4: FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes.
Get medical attention immediately.
SKIN: Immediately flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Wash clothing before reuse.
Get medical attention immediately.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
INGESTION: Seek medical attention immediately. Call a poison control center or
doctor for treatment advice. Have person drink water if able to swallow.
__________________________________________________________________________________________________
Section 5: FIRE FIGHTING MEASURES
Flash Point: 150 degrees F (CC Method)
Extinguishing Media: Dry chemical, CO2 or foam is recommended.
Special Fire Fighting Instructions: Wear a self contained breathing apparatus with a
full face-piece operated in the positive pressure demand mode with chemical resistant
personal protective equipment.
__________________________________________________________________________________________________
Section 6: ACCIDENTAL RELEASE MEASURES
Stop all leaks. Isolate hazard area. Keep unnecessary and unprotected personnel from
entering. Absorb spill with inert material - DO NOT use clay-type absorbent materials.
Eliminate all ignition sources. Prevent runoff from entering drains, sewers, streams
or other bodies of water. Absorb unrecoverable product. Transfer contaminated absorbent,
soil and other materials to containers for disposal.
__________________________________________________________________________________________________
Section 7: HANDLING AND STORAGE
Follow all MSDS/label precautions even after container is emptied because they may
contain product residues. Use with adequate ventilation. Do not get in eyes, on skin
or on clothing. Store in a cool, dry place. Keep container closed when not in use.
Keep out of reach of children. Do not transfer or store in plastic containers for
long periods of time.
__________________________________________________________________________________________________
Section 8: EXPOSURE CONTROLS and PERSONAL PROTECTION
Eye Protection: Wear safety glasses or goggles.
MATERIAL SAFETY DATA SHEET Trade Name: DIO-SOLV (I-4363)
Page 3 of 4
MSDS Number: IA-4363
Skin Protection: To prevent repeated or prolonged contact, wear impervious gloves
(made from rubber, nitrile or neoprene), clothing and boots.
Respiratory Protection: When respiratory protection is required, use an organic vapor
cartridge. A respiratory program that meets OSHA's 29 CFR 1910.34 & ANSI Z88.2
requirements must be followed.
Engineering Controls: Good general ventilation required.
__________________________________________________________________________________________________
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odor: Clear, colorless liquid with citrus odor
pH Concentrate: n/a
Solubility in Water: emulsifies
Vapor Pressure [mmHg]: n/e
Evaporation Rate (Butyl Acetate=1): n/e
Vapor Density [Air=1]: n/e
Specific Gravity [H20=1]: 0.82
Boiling Point: n/e
__________________________________________________________________________________________________
Section 10: REACTIVITY
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions to avoid: High temperature
Hazardous Decomposition Products: CO, CO2
Incompatibility: Absorbent clay, acids or oxidizers
__________________________________________________________________________________________________
Section 11: TOXICOLOGICAL INFORMATION
No data.
__________________________________________________________________________________________________
Section 12: ECOLOGICAL INFORMATION
No data.
__________________________________________________________________________________________________
Section 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Waste must be disposed of in accordance with federal, state and local environmental
control regulations.
__________________________________________________________________________________________________
Section 14: TRANSPORTATION INFORMATION
D.O.T. Shipping Name / Class:
Not regulated
__________________________________________________________________________________________________
Section 15: REGULATORY INFORMATION
U.S. Federal Regulations:
TSCA (Toxic Substances Control Act): The intentional ingredients of product are listed.
MATERIAL SAFETY DATA SHEET Trade Name: DIO-SOLV (I-4363)
Page 4 of 4
MSDS Number: IA-4363
Title III Section 311/312 Hazardous Categories - 40 CFR 370.2:
ACUTE (X) Chronic (X) Fire (X) Pressure ( ) Reactive ( ) Not Applicable ( )
(1) Title III Section 302/304 Extremely Hazardous Substances - 40 CFR 355 Appendix A
(2) Title III Section 313 Toxic Chemicals - 40 CFR 372.65
If indicated under Section 2 of this MSDS, this product contains toxic chemicals
subject to the reporting requirements of Section 313 of the Emergency Planning &
Community Right to Know Act of 1986.This information must be included in all
MSDS that are copied and distributed for this material.
RCRA Status: Under RCRA, it is the responsibility of the product user to determine
at the time of disposal, whether a material containing the product or derived from
the product should be classified as a hazardous waste. If this product becomes a
hazardous waste it would be assigned RCRA Code(s)
None
State and Local Regulations: Certain states maintain their own ingredient lists which
differ slightly from the Federal standards. If indicated under Section 2 of this MSDS,
states listed below may have regulations on ingredients contained in this product.
Check with your state for any additional regulations.
(3) California proposition 65 (Safe Drinking Water & Toxic Enforcement Act of 1986)
(4) Massachusetts (Hazardous Substance Disclosure by Employers)
__________________________________________________________________________________________________
Section 16: OTHER INFORMATION
This information was compiled from current manufacturer's MSDS's of the component
parts of the product.
Disclaimer: The Manufacturer believes that the information contained in the Material
Safety Data Sheet is accurate. The suggested procedures are based on experience as
of the date of publication. They are not necessarily all inclusive nor fully adequate
in every circumstance. Also, the suggestions should not be confused with, nor followed
in violation of applicable laws, regulations, rules or insurance requirements.
|