MATERIAL SAFETY DATA SHEET Page 1 of 4
HMIS RATINGS:
Health: 1
Flammability: 1
Reactivity: 0
Personal Protection: B
__________________________________________________________________________________________________
Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Trade Name: S.L.A.P. STICK (I-7305) Emergency Telephone Number: (800)535-5053
Chemical Family: Lubricating grease Date Prepared: NOV 6, 2003
Company Identification: ABC COMPOUNDING CO., INC. MSDS Number: IA-7305
P.O. BOX 16247 MFGD. BY: ABC Compounding Co., Inc.
ATLANTA, GA 6970 Jonesboro Rd.
Morrow, Ga. 30260
__________________________________________________________________________________________________
Section 2: COMPOSITION, INFORMATION ON INGREDIENTS
SARA SARA
CAS CHEMICAL % BY OSHA PEL/ 302/ 313 STATE CERCLA
NUMBER NAME WGHT. ACGIH TLV 304(1)* (2)* INFO(3) (4) RQ
64742-53-6 Hydrotreated Light 70-90 5 mg/m3 NO NO NO None
Naphthenic Petroleum
Distillate
3159-62-4 Calcium, 12-hydroxy 1-15 n/e NO NO NO None
Stearate
64742-52-5 Hydrotreated Heavy 0-2 n/e NO NO NO None
Naphthenic Petroleum
Distillate
n/a Organic Antimony 0-1 0.5 mg/m3 YES NO NO
Compounds
* See Section 15 for more information n/e = none established - n/a = not applicable
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION
__________________________________________________________________________________________________
EMERGENCY OVERVIEW
CAUTION. May cause skin irritation. Harmful or fatal if swallowed.
Injection of pressurized hydrocarbons into skin can cause severe,
permanent tissue damage.
__________________________________________________________________________________________________
Primary Route of Entry: Skin contact
Acute/Potential Health Effects:
EYES: May cause mild eye irritation. Symptoms include stinging, tearing and redness.
SKIN: May cause mild skin irritation. Prolonged or repeated contact may dry the skin.
Injection can cause severe, permanent tissue damage.
INHALATION: Repeated or prolonged overexposure to product mists can result in respira-
tory tract inflammation and an increased risk of infection.
INGESTION: Harmful or fatal if swallowed. Aspiration hazard - this material can enter
lungs during swallowing or vomiting and cause lung inflammation and damage.
MATERIAL SAFETY DATA SHEET Trade Name: S.L.A.P. STICK (I-7305)
Page 2 of 4
MSDS Number: IA-7305
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION - continued:
Chronic / Long Term Effects: Reports have associated repeated and prolonged occupational
overexposure to solvents with permanent brain and nervous system damage.
Signs and Symptoms of Overexposure: Hydrocarbons injected into skin are not readily
removed by body fluids and can cause pain, swelling, chemical irritation, infection
and tissue destruction. Early symptoms may be minimal.
Target Organ Effects: No data.
Reproductive/Developmental Information: No data.
Carcinogenic Information: This material is not listed as a carcinogen by IARC, NTP or
OSHA.
__________________________________________________________________________________________________
Section 4: FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes.
Get medical attention immediately.
SKIN: Immediately flush skin with water for at least 15 minutes. Seek medical
attention if irritation persists. In case of injection, seek medical attention
immediately.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
INGESTION: Seek medical attention immediately. Aspiration hazard: Do not induce
vomiting or give anything by mouth because this material can enter the lungs and
cause severe lung damage. Do not leave individual unattended.
__________________________________________________________________________________________________
Section 5: FIRE FIGHTING MEASURES
Flash Point: > 392 F (estimated)
Extinguishing Media: Use appropriate methods for combating surrounding fire.
Special Fire Fighting Instructions: Wear a self contained breathing apparatus with a
full face piece operated in the positive pressure demand mode.
__________________________________________________________________________________________________
Section 6: ACCIDENTAL RELEASE MEASURES
Remove any source of ignition. Absorb with inert material, sand, clay, etc. and
shovel up for disposal.
__________________________________________________________________________________________________
Section 7: HANDLING AND STORAGE
Do no use or store near heat, sparks or open flame. Store in a cool dry place.
Use with adequate ventilation. Keep out of reach of children.
__________________________________________________________________________________________________
Section 8: EXPOSURE CONTROLS and PERSONAL PROTECTION
Eye Protection: Wear safety glasses or goggles.
MATERIAL SAFETY DATA SHEET Trade Name: S.L.A.P. STICK (I-7305)
Page 3 of 4
MSDS Number: IA-7305
Skin Protection: To prevent repeated or prolonged contact, wear impervious gloves
(made from rubber, nitrile or neoprene).
Respiratory Protection: No special requirements needed for this material.
Engineering Controls: Use general ventilation.
__________________________________________________________________________________________________
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odor: Blue grease, mild petroleum odor
pH Concentrate: n/a
Solubility in Water: n/e
Vapor Pressure [mmHg]: n/e
Evaporation Rate (Butyl Acetate=1): n/e
Vapor Density [Air=1]: > 10
Specific Gravity [H20=1]: < 1
Boiling Point: n/e
__________________________________________________________________________________________________
Section 10: REACTIVITY
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions to avoid: High temperature
Hazardous Decomposition Products: CO, CO2
Incompatibility: Oxidizers, chlorine and fluorine
__________________________________________________________________________________________________
Section 11: TOXICOLOGICAL INFORMATION
Hydrotreated petroleum distillates: oral LD50 >5000 mg/kg (rat), dermal LD50> 2000 mg/kg
(rabbit); inhalation LC50 10.5 mg/L (male rat); draize eye acute - non-irritating
(rabbit); draize dermal acute - mild skin irritant (rabbit), 28-day dermal
sub-chronic - mild to moderate skin irritant (rabbit and rat).
__________________________________________________________________________________________________
Section 12: ECOLOGICAL INFORMATION
No data.
__________________________________________________________________________________________________
Section 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Waste must be disposed of in accordance with federal, state and local environmental
control regulations.
__________________________________________________________________________________________________
Section 14: TRANSPORTATION INFORMATION
D.O.T. Shipping Name / Class:
Not regulated.
__________________________________________________________________________________________________
Section 15: REGULATORY INFORMATION
U.S. Federal Regulations:
TSCA (Toxic Substances Control Act): The intentional ingredients of product are listed.
MATERIAL SAFETY DATA SHEET Trade Name: S.L.A.P. STICK (I-7305)
Page 4 of 4
MSDS Number: IA-7305
Title III Section 311/312 Hazardous Categories - 40 CFR 370.2:
ACUTE (X) Chronic ( ) Fire ( ) Pressure ( ) Reactive ( ) Not Applicable ( )
(1) Title III Section 302/304 Extremely Hazardous Substances - 40 CFR 355 Appendix A
(2) Title III Section 313 Toxic Chemicals - 40 CFR 372.65
If indicated under Section 2 of this MSDS, this product contains toxic chemicals
subject to the reporting requirements of Section 313 of the Emergency Planning &
Community Right to Know Act of 1986. This information must be included in all
MSDS that are copied and distributed for this material.
RCRA Status: Under RCRA, it is the responsibility of the product user to determine
at the time of disposal, whether a material containing the product or derived from
the product should be classified as a hazardous waste. If this product becomes a
hazardous waste it would be assigned RCRA Code(s)
None
State and Local Regulations: Certain states maintain their own ingredient lists which
differ slightly from the Federal standards. If indicated under Section 2 of this MSDS,
states listed below may have regulations on ingredients contained in this product.
Check with your state for any additional regulations.
(3) California proposition 65 (Safe Drinking Water & Toxic Enforcement Act of 1986)
(4) Massachusetts (Hazardous Substance Disclosure by Employers)
__________________________________________________________________________________________________
Section 16: OTHER INFORMATION
This information was compiled from current manufacturer's MSDS's of the component
parts of the product.
Disclaimer: The Manufacturer believes that the information contained in the Material
Safety Data Sheet is accurate. The suggested procedures are based on experience as
of the date of publication. They are not necessarily all inclusive nor fully adequate
in every circumstance. Also, the suggestions should not be confused with, nor followed
in violation of applicable laws, regulations, rules or insurance requirements.
|