MATERIAL SAFETY DATA SHEET Page 1 of 4
HMIS RATINGS:
Health: 2
Flammability: 3
Reactivity: 0
Personal Protection: G
__________________________________________________________________________________________________
Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Trade Name: LON GON Emergency Telephone Number: (800)535-5053
Chemical Family: Deodorant Date Prepared: AUG 20, 2003
Company Identification: ABC COMPOUNDING CO., INC. MSDS Number: IA-5086
P.O. BOX 16247 MFGD. BY: ABC Compounding Co., Inc.
ATLANTA, GA 6970 Jonesboro Rd.
Morrow, Ga. 30260
__________________________________________________________________________________________________
Section 2: COMPOSITION, INFORMATION ON INGREDIENTS
CAS CHEMICAL % BY OSHA PEL/ SARA SARA STATE
NUMBER NAME WGHT. ACGIH TLV 302/304(1)* 313 (2)* INFO(3)(4)
67-63-0 Isopropanol < 33.0 400 ppm / NO NO NO
400 ppm
* See Section 15 for more information n/e = none established - n/a = not applicable
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION
__________________________________________________________________________________________________
EMERGENCY OVERVIEW
DANGER. Flammable. Keep away from heat and flame. Avoid inhalation of concen-
rated vapors. Causes eye irritation.
__________________________________________________________________________________________________
Primary Route of Entry: Eye contact, skin contact, inhalation
Acute/Potential Health Effects:
EYES: Causes irritation, experienced as stinging discomfort, pain, tearing or redness.
Corneal injury may occur.
SKIN: May cause minor irritation with itching and possible slight local redness.
Prolonged or repeated contact may cause defatting and drying of the skin.
INHALATION: Vapor may cause irritation of the respiratory tract. Avoid inhalation of
concentrated vapors.
INGESTION: May cause dizziness, faintness, drowsiness, decreased awareness and responsive-
ness, lack of coordination, abdominal discomfort, nausea, vomiting and diarrhea.
MATERIAL SAFETY DATA SHEET Trade Name: LON GON
Page 2 of 4
MSDS Number: IA-5086
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION - continued:
Chronic / Long Term Effects: Repeated or prolonged exposure to isopropanol can be
irritating to mucosal membranes.
Signs and Symptoms of Overexposure: Prolonged or repeated skin exposure may cause
defatting of skin. Overexposure by inhalation may cause headache, nausea, dizziness
and even loss of consciousness.
Target Organ Effects: No data.
Reproductive/Developmental Information: No data.
Carcinogenic Information: This material is not listed as a carcinogen by IARC, NTP or
OSHA.
__________________________________________________________________________________________________
Section 4: FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes.
Get medical attention immediately.
SKIN: Immediately flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Wash clothing before reuse.
Get medical attention if irritation persists.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
INGESTION: Seek medical attention immediately. Call a poison control center or
doctor for treatment advice. Have person sip a glass of water if able to swallow.
Never give anything by mouth to an unconscious person.
__________________________________________________________________________________________________
Section 5: FIRE FIGHTING MEASURES
Flash Point: 83 degrees F (T.O.C. Method)
Extinguishing Media: Dry chemical, CO2, foam or water spray is recommended.
Special Fire Fighting Instructions: Wear a self contained breathing apparatus with a
full face piece operated in the positive pressure demand mode. Chemical resistant PPE
is recommended.
__________________________________________________________________________________________________
Section 6: ACCIDENTAL RELEASE MEASURES
Stop all leaks. Isolate hazard area. Keep unnecessary and unprotected personnel from
entering. Absorb spill with inert material (e.g. dry sand, earth). Eliminate all igni-
tion sources. Prevent runoff from entering drains, sewers, streams or other bodies of
water. Absorb unrecoverable product. Transfer contaminated absorbent, soil and other
materials to containers for disposal.
__________________________________________________________________________________________________
Section 7: HANDLING AND STORAGE
Follow all MSDS/label precautions even after container is emptied because they may
contain product residues. Use with adequate ventilation. Do not get in eyes, on skin
or clothing. Store in a cool, dry place. Keep container closed when not in use.
Keep out of reach of children.
__________________________________________________________________________________________________
Section 8: EXPOSURE CONTROLS and PERSONAL PROTECTION
Eye Protection: Wear safety glasses with side shields or goggles.
MATERIAL SAFETY DATA SHEET Trade Name: LON GON
Page 3 of 4
MSDS Number: IA-5086
Skin Protection: To prevent repeated or prolonged contact, wear impervious gloves
(made from rubber, nitrile or neoprene), clothing and boots.
Respiratory Protection: When respiratory protection is required, use an organic vapor
cartridge. A respiratory program that meets OSHA's 29 CFR 1910.34 & ANSI Z88.2
requirements must be followed.
Engineering Controls: Good general ventilation required.
__________________________________________________________________________________________________
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odor: Clear, colorless liquid with floral fragrance
pH Concentrate: 7.0
Solubility in Water: Complete
Vapor Pressure [mmHg]: n/e
Evaporation Rate (Butyl Acetate=1): n/e
Vapor Density [Air=1]: n/e
Specific Gravity [H20=1]: 0.962
Boiling Point: > 150 F
__________________________________________________________________________________________________
Section 10: REACTIVITY
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions to avoid: High temperature
Hazardous Decomposition Products: CO, CO2
Incompatibility: Strong oxidizing agents, strong acids
__________________________________________________________________________________________________
Section 11: TOXICOLOGICAL INFORMATION
Isopropanol: SKIN-Rabbit; 24 hr uncovered-no irritation. EYE-Rabbit; 0.02ml-moderate
corneal injury.
__________________________________________________________________________________________________
Section 12: ECOLOGICAL INFORMATION
Isopropanol: Toxicity to micro-organisms-bacterial inhibition; IC50 Results: 5000 mg/l
Isopropanol: Toxicity to fish- fathead minnow; 96h; LC50 Results: 8300 mg/l
__________________________________________________________________________________________________
Section 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Waste must be disposed of in accordance with federal, state and local environmental
control regulations.
__________________________________________________________________________________________________
Section 14: TRANSPORTATION INFORMATION
D.O.T. Shipping Name / Class:
Isopropanol Solution, 3, UN 1219, II
__________________________________________________________________________________________________
Section 15: REGULATORY INFORMATION
U.S. Federal Regulations:
TSCA (Toxic Substances Control Act): The intentional ingredients of product are listed.
MATERIAL SAFETY DATA SHEET Trade Name: LON GON
Page 4 of 4
MSDS Number: IA-5086
Title III Section 311/312 Hazardous Categories - 40 CFR 370.2:
ACUTE (X) Chronic (X) Fire (X) Pressure ( ) Reactive ( ) Not Applicable ( )
(1) Title III Section 302/304 Extremely Hazardous Substances - 40 CFR 355 Appendix A
(2) Title III Section 313 Toxic Chemicals - 40 CFR 372.65
If indicated under Section 2 of this MSDS, this product contains toxic chemicals
subject to the reporting requirements of Section 313 of the Emergency Planning &
Community Right to Know Act of 1986. This information must be included in all
MSDS that are copied and distributed for this material.
RCRA Status: Under RCRA, it is the responsibility of the product user to determine
at the time of disposal, whether a material containing the product or derived from
the product should be classified as a hazardous waste. If this product becomes a
hazardous waste it would be assigned RCRA Code(s)
D001
State and Local Regulations: Certain states maintain their own ingredient lists which
differ slightly from the Federal standards. If indicated under Section 2 of this MSDS,
states listed below may have regulations on ingredients contained in this product.
Check with your state for any additional regulations.
(3) California proposition 65 (Safe Drinking Water & Toxic Enforcement Act of 1986)
(4) Massachusetts (Hazardous Substance Disclosure by Employers)
__________________________________________________________________________________________________
Section 16: OTHER INFORMATION
This information was compiled from current manufacturer's MSDS's of the component
parts of the product.
Disclaimer: The Manufacturer believes that the information contained in the Material
Safety Data Sheet is accurate. The suggested procedures are based on experience as
of the date of publication. They are not necessarily all inclusive nor fully adequate
in every circumstance. Also, the suggestions should not be confused with, nor followed
in violation of applicable laws, regulations, rules or insurance requirements.
|