Talas
Your professional resource for the finest in
conservation, preservation, and restoration
supplies 鈥? since 1962.
http://talasonline.com
Incralac by StanChem (formulation 69X1732)
Description:
StanChem 69X1732 Incralac represents a modern breakthrough in clear, air-dry coatings for copper
base alloys. In an extensive research program initiated by the International Copper Research Assoc.
(INCRA), Incralac was found to provide the best protection for copper and brass of all air-dry coatings
tested. Formulated from a blend of acrylic resins, Incralac also contains a UV absorber and a chelating
agent to prevent under-film.
Advantages:
*Air Dry * by INCRA *Corrosion resistant
*Easy to apply *Weather resistant *Fast Curing
Product Data:
Type: Thermoplastic Acrylic Substrates: Copper or copper based alloys.
Solids: 15% +/- 1% Recomm. For maximum corrosion
film resistance 1.0-1.5 mils dry
Weight/gal: 7.5 lbs/gal +/- 0.1
thickness: applied in multiple coats of 0.3-
30-60 sec Z4 @ 77oF
Viscosity: 0.5 mils per coat.
150 ft2/gal. @ 1.0 mils, but
Color: Clear Theoretical
Coverage: varies depending on overspray,
Gloss: Very high. If desired a
etc.
flattening agent (Stan Chem
71X0202) can be added to Recoating: After removal of accumulated
reduce gloss. Do not use over surface dust and grime, reapply
25% flattening agent. Incralac.
40-50oF (tag open cup)
Hardness: Pencil = 2H Flashpoint:
Application: Spray or Dip Shelf Life: Stable up to two years from date
of manufacture if kept in tightly
Reduction: None. If desired can be reduced
closed containers between 40-
up to 2:1 with Stan Chem
90oF.
79X0010
VOC: 4.35 lbs/gal. 522 G/L
Curing: Air dry to handle within 15
minutes, but needs 2-3 days
minimum before exposure (7
days recommended)
1/2
Safety
Solvent based Incralac contains flammable solvents. Never apply material near an open flame or
excessive heat. Proper ventilation should be provided especially in enclosed areas. Avoid prolonged
breathing of vapor, and repeated contact with skin. For safety information on Incralac please request a
Materials Safety Data Sheet (MSDS).
Warranty
Seller warranties that this product will meet the specifications which it sets forth. Sellers responsibility
under this warranty will be limited solely to replacing the product which prove defective, provided that
buyer gives seller prompt notice in writing of said defect. Products may be returned to seller only after
written authorization has been obtained from seller. The foregoing warranty is in lieu of all other
warranties, whether oral, written, expressed, or implied. IMPLIED WARRANTIES OR
MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE WILL NOT APPLY.
Technical or other advice is furnished by us solely as an accommodation and shall not increase the
scope of our responsibilities or liability. Seller鈥檚 warranty obligations and buyers remedies hereunder
are solely and exclusively as stated herein: In the event that the seller be liable either for the labor and
other associated costs incurred in replacing the product, including but not limited to, the removal and
application, or for other incidental or consequential damages.
2/2
|