MSDS

               Material Safety Data Sheet

1. MATERIAL IDENTIFICATION                       Date: May 4, 2005





                    3XTG Glue

   Product:

                    CAS No. 9000-70-8



   Synonyms:        Technical Gelatin



COMPANY IDENTIFICATION



   MILLIGAN & HIGGINS

   Division of Hudson Industries Corporation

   100 Maple Avenue, P.O. Box 506

    Johnstown, New York 12095-0506 USA



   EMERGENCY TELEPHONE NUMBER:                   518-762-4638



   Information Telephone Number:                 518-762-4638

   Facsimile Telephone Number:                   518-762-7039

   e-Mail:                                       milligan@superior.net

                                                 http://www.milligan1868.com

   EMERGENCY OVERVIEW



Tan to light yellow colored fine granular solid with low odor. Although not a

combustible solid, this material will char if involved in a fire, releasing

typical carbon oxides. No significant health effects are associated with this

material.





2. COMPOSITION(Hazardous Compounds)



   NO REPORTABLE QUANTITIES OF HAZARDOUS INGREDIENTS

   ARE PRESENT.





                                        Page 1

                                          MSDS

3. HAZARDS IDENTIFICATION



  Potential Health Effects



  �   Inhalation Health Risks and Symptoms of Exposure: Inhalation of dust may cause irritation of

      throat and respiratory tract.

  �   Skin and Eye Contact Health Risks and Symptoms of Exposure: Skin irritation may occur.

      Possible dermatitis on prolonged or repeated contact. Hot solutions may cause burns.

  �   Skin Absorption Health Risks and Symptoms of Exposure: No information.

  �   Ingestion Health Risks and Symptoms of Exposure: Not a primary route of entry.



4. FIRST AID MEASURES



      Eyes: Flush eyes with water until all foreign matter is completely removed. Get medical attention.



      Skin: Wash dry material from skin with soap and water. Wash away solutions under running

      water, and treat for any burns



      Inhalation: Remove affected persons to fresh air and consult physician.



5. FIRE FIGHTING MEASURES



  �   Extinguishing Media: Water Fog, CO2, Foam, Alcohol Foam, Dry Chemical.

  �   Special Fire Fighting Procedures: Use Smoke Mask

  �   Unusual Fire and Explosion Hazards: None. When exposed to open flame or extreme heat, this

      material will char and eventually disintegrate with emission of smoke, leaving only a residual ash.

      Glue dust dispersed into the air may form explosive mixtures.

  �   Flash Point: 260-270oC Decomposition/Evolved Gas Flammable.



6. ACCIDENTAL RELEASE MEASURES



      Sweep up dry material. Allow solutions to cool completely and gel; then strip from surface. Clean

      up residue with warm water.



      Dispose in accordance with local, state and federal environmental regulations. Small amounts of

      solution may be washed into sanitary sewers, if local disposal district regulations allow.



7. HANDLING and STORAGE



      Store is a cool, dry place. Empty packaging carefully to avoid dispersing dust into the air. Sweep

      up dust accumulations, if they occur. Industrial vacuum cleaner is preferred in order not to re-

      disperse dust into the air. Avoid contact with water prior to use.



                                               Page 2





                                           MSDS

8. EXPOSURE CONTROLS/PERSONAL PROTECTION



  �   Respiratory Protection: Dust mask while emptying packaging. Smoke mask recommended when

      this material is exposed to extreme heat(260-270oC)

  �   Protective Gloves: Rubber or plastic while handling.

  �   Eye Protection: Glasses with sideshields.

  �   Other Protective Clothing or Equipment: Eyewash fountain.

  �   Work/Hygienic Practices: Wash after handling and before eating, smoking or using restrooms.

      Maintain good housekeeping.

  �   Other precautions: Do not take internally. Avoid contact with skin and eyes, and inhaling dusts.



9. PHYSICAL and CHEMICAL CHARACTERISTICS



  �   Boiling Point: N/A (dry material)

  �   Vapor Density: N/A

  �   Evaporation Rate: N/A

  �   Coating V.O.C.: N/A

  �   Material V.O.C.: N/A

  �   Solubility in Water: In all proportions.

  �   Appearance and Odor: Tan to light yellow colored granular solid. Low Odor.

  �   Specific Gravity(water = 1): 1.27



10. STABILITY and REACTIVITY



  �   Stability: Stable

  �   Conditions to Avoid: No information.

  �   Incompatibility(Materials to Avoid): No information

  �   Hazardous Decomposition or By-products: Oxides of carbon when burned.

  �   Hazardous Polymerization: None



11. TOXICOLOGICAL INFORMATION



  �   Chronic Health Hazard and Target Organ Effects: No information.

  �   Carcinogenicity:        NTP? No

                       IARC Monographs? No

                       OSHA Regulated? No

  �   Medical Conditions Generally Aggravated by Exposure: Skin disorders.



12. ECOLOGICAL INFORMATION



      No data is available on the adverse effects of this material on the environment. Neither COD

      and/or BOD data is available. Based on chemical composition of this material it is assumed that

      the material can be treated in an acclimatized biological waste treatment plant system in limited

      quantities.

                                               Page 3

                                              MSDS

13. DISPOSAL CONSIDERATIONS



         This material is not considered a hazardous waste under Federal Waste

         Regulations. Pleased be advised, however, state and local requirements for waste

         disposal may be more restrictive or otherwise different from federal regulations.

         Consult state and local regulations regarding the proper disposal of this material.



         It is recommended that this material waste be land-filled or incinerated after

         securing Environmental Regulatory Agency and landfill operations approval.





14. TRANSPORT INFORMATION



    This material is not a DOT Hazardous Material.



15. OTHER INFORMATION

    Label information:     NFPA

                                    Fire - 0

                                    Health - 0

                                    Reactivity - 0

                                    Specific Hazard - None









Disclaimer



This information is furnished without warranty, representation, inducement, or license of any kind except

that it is accurate to the best of Milligan & Higgins� knowledge or obtained from sources believed by us to

be accurate. M & H does not assume any legal responsibility for the use or reliance upon the same.

Customers are encouraged to conduct their own tests.



                                                    Page 4