MATERIAL SAFETY DATA SHEET
Page 1 of 5
GLB Algimycin 1000
1. Product And Company Identification
Supplier Manufacturer
GLB Advantis Technologies, Inc.
1400 Bluegrass Lakes Parkway 1400 Bluegrass Lakes Parkway
Alpharetta, GA 30004 United States Alpharetta, GA 30004 United States
Telephone Number: (770)521-5999 Telephone Number: (770) 521-5999
FAX Number: (770)521-5959 FAX Number: (770) 521-5959
Web Site: www.poolspacare.com Web Site: www.poolspacare.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC - DAY OR NIGHT: (800) 424-9300 CHEMTREC - DAY OR NIGHT: (800) 424-9300
Issue Date: 02/14/2005
Product Name: Algimycin 1000
Chemical Name: Copper Alkanolamine Complex
Chemical Family: Copper and Nitrogen Compounds
Chemical Formula: Proprietary Mixture
MSDS Number: 232
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
COPPERCARBONATE 12069-69-1
DIMETHYL BENZYL AMMONIUM CHLORIDE 68424-85-1
ETHYL ALCOHOL 64-17-5
MONOETHANOLAMINE 141-43-5
TRIETHANOLAMINE 102-71-6
Ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. Materials
determined to be health hazards are listed if they comprise 1% or more of the composition. Materials identified as
carcinogens are listed if they comprise 0.1% or more of the composition. Information on proprietary materials is available in
29CFR 1910.1200(i)(1).
Hazards Identification (Pictograms)
3. Hazards Identification
Primary Routes(s) Of Entry
Skin Contact, Eye Contact, Inhalation
Eye Hazards
Causes severe eye burns.
Skin Hazards
Corrosive to living tissue.
MATERIAL SAFETY DATA SHEET Page 2 of 5
Algimycin 1000
3. Hazards Identification - Continued
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
Causes respiratory tract irritation.
Signs And Symptoms
Irritation of Eyes, Skin, and Respiratory Passages
Conditions Aggravated By Exposure
None Known
First Aid (Pictograms)
4. First Aid Measures
Eye
Remove the victim from the source of contamination or exposure to nearest eyewash or other source of clean water.
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes.
Skin
Rinse the affected area with tepid water for at least 15 minutes.
Ingestion
Call a physician or a poison control center immediately. If victim is fully conscious, give one or two cups of water or
milk to drink. If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
If inhaled, remove to fresh air. If breathing is difficult, give oxygen.
Evaluate Principal Route of Entry, Seek appropriate medical attention. Never give anything by mouth to an unconscious
person.
Fire Fighting (Pictograms)
5. Fire Fighting Measures
Flash Point: N/A 掳F
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire.
Combustion products are toxic.
6. Accidental Release Measures
Contain and/or absorb spill with inert material (e.g. sand, vermiculite). Avoid release to the environment. May flush small
amount to sewer.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children.Wash thoroughly after handling.
Handling Precautions
Avoid contact with eyes. Wash hands before eating, drinking, or smoking. Avoid contact with skin and clothing.
MATERIAL SAFETY DATA SHEET Page 3 of 5
Algimycin 1000
7. Handling And Storage - Continued
Storage Precautions
Store in a cool dry place. Keep out of reach of children.
Work/Hygienic Practices
Use safe chemical handling procedures suitable for the hazards presended by this material.
Protective Clothing (Pictograms)
8. Exposure Controls/Personal Protection
Engineering Controls
Local exhaust acceptable. Special exhaust not required
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Chemical-resistant gloves.
Respiratory Protection
General room ventilation is normally adequate.
Ingredient(s) - Exposure Limits
ETHYL ALCOHOL
ACGIH TLV-TWA 1000 ppm
OSHA PEL-TWA 1000 ppm
TRIETHANOLAMINE
ACGIH TLV-TWA 5 mg/m3
9. Physical And Chemical Properties
Appearance
Blue viscous liquid
Odor
slight
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: 212 掳F
Specific Gravity: 1.2
Percent Volitales: Nil
Vapor Pressure: Not established
Vapor Density: >1
pH Factor: 6-8
Solubility: soluble
Evaporation Rate: <1
10. Stability And Reactivity
Sta bility: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Contact with Clay
MATERIAL SAFETY DATA SHEET Page 4 of 5
Algimycin 1000
10. Stability And Reactivity - Continued
Incompatible Materials
Strong Acids
Hazardous Decomposition Products
Hydrogen chloride fumes, oxides of Carbon and Nitrogen
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Refer to applicable local, state and federal regulations as well as industry standards.
14. Transport Information
Proper Shipping Name
CORROSIVE LIQUIDS, N.O.S. (Copper Triethanolamine Complex)
Hazard Class
8,PGIII (<4L Consumer Commodity ORM-D)
DOT Identification Number
UN1760
15. Regulatory Information
Ingredient(s) - State Regulations
ETHYL ALCOHOL
New Jersey - Workplace Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
TRIETHANOLAMINE
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
NFPA HMIS
HEALTH 2
1
FLAMMABILITY 0
2 0
REACTIVITY 1
B
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
MSDS Preparer: JHW3
This MSDS Superceeds A Previous MSDS Dated: 04/18/2001
MATERIAL SAFETY DATA SHEET Page 5 of 5
Algimycin 1000
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties
and make no representations as to the accuracy or completeness of the information contained therein,
and assume no responsibility regarding the suitablility of this information for the user's intended purposes
or for the consequences of its use. Each individual should make a determination as to the suitability of
the information for their particular purposes(s).
GLB
Printed Using MSDS Generator鈩? 2000
|