MATERIAL SAFETY DATA SHEET
Page 1 of 5
GLB Filter Rinse
1. Product And Company Identification
Supplier Manufacturer
GLB Advantis Technologies, Inc.
1400 Bluegrass Lakes Parkway 1400 Bluegrass Lakes Parkway
Alpharetta, GA 30004 United States Alpharetta, GA 30004 United States
Telephone Number: (770)521-5999 Telephone Number: (770) 521-5999
FAX Number: (770)521-5959 FAX Number: (770) 521-5959
Web Site: www.poolspacare.com Web Site: www.poolspacare.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC - DAY OR NIGHT: (800) 424-9300 CHEMTREC - DAY OR NIGHT: (800) 424-9300
Issue Date: 06/13/2003
Product Name: GLB Filter Rinse
Chemical Name: Proprietary Mixture
Chemical Family: Filter Cleaner
Chemical Formula: Proprietary Mixture
MSDS Number: 38
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
1-Hydroxyethane-1,1-diphosphoric Acid 2809-21-4
2-BUTOXYETHANOL 111-76-2
CITRICACID 77-92-9
Poly(oxy-1,2-ethanediyl), alpha-(nonlyphenyl-omega-hydroxy- 9016-45-9
Ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. Materials
determined to be health hazards are listed if they comprise 1% or more of the composition. Materials identified as
carcinogens are listed if they comprise 0.1% or more of the composition. Information on proprietary materials is available in
29CFR 1910.1200(i)(1).
3. Hazards Identification
Primary Routes(s) Of Entry
Skin Contact
Eye Hazards
May cause irreversible eye damage.
Skin Hazards
May cause permanent skin damage.
Ingestion Hazards
If ingested, get immediate medical attention
Inhalation Hazards
May be severely irritating to respiratory tract.
MATERIAL SAFETY DATA SHEET Page 2 of 5
GLB Filter Rinse
3. Hazards Identification - Continued
Signs And Symptoms
Irritation of Eyes and Respiratory Passages
First Aid (Pictograms)
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes.Get
medical attention immediately.
Skin
In case of contact, immediately flush skin with plenty of water for at least 15 minutes. Get medical attention
immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
Give Milk, Egg Whites or Baking Soda Immediately. Drink large amounts of water. Contact a physician or poison
control.
Inhalation
If inhaled, remove to fresh air. Consult a physician. If breathing is difficult, give oxygen. If not breathing, give artificial
respiration.
Fire Fighting (Pictograms)
5. Fire Fighting Measures
Flash Point: n/a 掳F
Fire And Explosion Hazards
Fumes released under fire conditions are toxic.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Clean up spill immediately. Contain and/or absorb spill with inert material (e.g. sand, vermiculite). Flush spill area with
water. Use appropriate containers to avoid environmental contamination.
Handling & Storage (Pictograms)
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store material in a cool and dry place.
MATERIAL SAFETY DATA SHEET Page 3 of 5
GLB Filter Rinse
7. Handling And Storage - Continued
Work/Hygienic Practices
Use safe chemical handling procedures suitable for the hazards presented by this material.
Protective Clothing (Pictograms)
8. Exposure Controls/Personal Protection
Engineering Controls
Local exhaust acceptable. Special exhaust not required
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves.
Respiratory Protection
General room ventilation is normally adequate.
Ingredient(s) - Exposure Limits
2-BUTOXYETHANOL
ACGIH TLV-TWA 20 ppm (Skin)
OSHA PEL-TWA 50 ppm (Skin)
9. Physical And Chemical Properties
Appearance
Dark blue liquid
Odor
Detergent
Chemical Type: Mixture
Physical State: Liquid
Melting Point: n/a 掳F
Boiling Point: 215 掳F
Specific Gravity: 1.138
Molecular Weight: NOT DETERMINED
Percent Volitales: NOT DETERMINED
Vapor Pressure: 17
Vapor Density: 0.6
pH Factor: 1-3
Solubility: SOLUBLE IN WATER
Evaporation Rate: <1
Corrosive
10. Stability And Reactivity
Sta bility: STABLE
Hazardous Polymerization: WILL NOT OCCUR
Conditions To Avoid (Stability)
Avoid contact with strong alkalis
Incompatible Materials
Alkalis
MATERIAL SAFETY DATA SHEET Page 4 of 5
GLB Filter Rinse
10. Stability And Reactivity - Continued
Hazardous Decomposition Products
Oxides of carbon, nitrogen, aldehydes,ketones
11. Toxicological Information
Acute Studies
Concentrated product may be corrosive to skin and mucous membranes.
12. Ecological Information
No Data Available...
13. Disposal Considerations
Refer to applicable local, state and federal regulations as well as industry standards.
14. Transport Information
Proper Shipping Name
CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Hydroxyethanediphosphonic Acid)
Hazard Class
8,PGIII (<=4L Consumer Commodity ORM-D)
DOT Identification Number
UN3265
Additional Shipping Paper Description
DOT (Pictograms)
15. Regulatory Information
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
2-BUTOXYETHANOL (111-76-2) %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
2-BUTOXYETHANOL
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
Ingredient(s) - State Regulations
2-BUTOXYETHANOL
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
MATERIAL SAFETY DATA SHEET Page 5 of 5
GLB Filter Rinse
NFPA HMIS
HEALTH 3
1
FLAMMABILITY 1
3 1
REACTIVITY 1
D
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
MSDS Preparer: JHW
This MSDS Superceeds A Previous MSDS Dated: 07/24/2000
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties
and make no representations as to the accuracy or completeness of the information contained therein,
and assume no responsibility regarding the suitablility of this information for the user's intended purposes
or for the consequences of its use. Each individual should make a determination as to the suitability of
the information for their particular purposes(s).
GLB
Printed Using MSDS Generator鈩? 2000
|