Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

96-80-0

File Name: arkema-inc_com---884.asp
                                                          DIISOPROPYLAMINOETHANOL
Material Safety Data Sheet
Arkema Inc.
1 PRODUCT AND COMPANY IDENTIFICATION

EMERGENCY PHONE NUMBERS:
Thio and Fine Chemicals
Chemtrec: (800) 424-9300 (24hrs) or (703) 527-3887
Arkema Inc.
Medical: Rocky Mountain Poison Control Center
2000 Market Street
(866) 767-5089 (24Hrs)
Philadelphia, PA 19103
Information Telephone Numbers Phone Number Available Hrs
Customer Service 1-800-628-4453 8:30 to 5:30 EST

Product Name DIISOPROPYLAMINOETHANOL
Product Synonym(s) DIPAE

Chemical Family Alkyl Alkanolamine
Chemical Formula C8H19NO
Chemical Name Ethanol, 2-[bis(1-methylethyl)amino]-
EPA Reg Num
Product Use


2 COMPOSITION / INFORMATION ON INGREDIENTS

Ingredient Name CAS RegistryNumber Typical % OSHA
(N,N-Diisopropylamino)ethanol 96-80-0 >or= 100% By Wt. Y
The substance(s) marked with a "Y" in the OSHA column, are identified as hazardous chemicals according to the
criteria of the OSHA Hazard Communication Standard (29 CFR 1910.1200)

This material is classified as hazardous under Federal OSHA regulation.

The components of this product are all on the TSCA Inventory list.


3 HAZARDS IDENTIFICATION

Emergency Overview
Clear, colorless to pale yellow liquid with ammonia-like odor

DANGER!
CAUSES EYE AND SKIN BURNS. MAY CAUSE BLINDNESS.
HARMFUL IF ABSORBED THROUGH SKIN.
MAY CAUSE RESPIRATORY TRACT IRRITATION.
MAY BE HARMFUL IF SWALLOWED.


Potential Health Effects

Inhalation and skin contact are expected to be the primary routes of occupational exposure to this material. Based on
single exposure animal tests, it is considered to be slightly toxic if swallowed or inhaled, moderately toxic if absorbed
through skin, and corrosive to eyes and skin. Vapor may be irritating to the eyes and upper respiratory tract.
Temporary and reversible visual disturbances characterized by mildly blurred vision, a blue-gray discolorization of sight
(blue haze) or halo vision (appearance of a halo when looking at light sources) may occur.




Product Code: 000287 Page 1
Revision: 10 Issued: 27 NOV 2006 of 6
DIISOPROPYLAMINOETHANOL
Material Safety Data Sheet
Arkema Inc.

4 FIRST AID MEASURES

IF IN EYES, immediately flush with plenty of water for at least 15 minutes. Get medical attention immediately.

IF ON SKIN, immediately flush with plenty of water for at least 15 minutes while removing contaminated
clothing and shoes. Get medical attention. Call a Poison Control Center. Wash clothing before reuse.
Destroy contaminated shoes.

IF SWALLOWED, do NOT induce vomiting. Give water to drink. Get medical attention immediately. NEVER
GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.

IF INHALED, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
oxygen. Get medical attention.


5 FIRE FIGHTING MEASURES

Fire and Explosive Properties
Auto-Ignition Temperature NE
Flash Point 66.7 C (152 F) Flash Point Method Seta CC
Flammable Limits- Upper NE
NE
Lower
Extinguishing Media
Use water spray, carbon dioxide, foam or dry chemical.

Fire Fighting Instructions
Fire fighters and others who may be exposed to products of combustion should wear full fire fighting turn out
gear (full Bunker Gear) and self-contained breathing apparatus (pressure demand NIOSH approved or
equivalent). Fire fighting equipment should be thoroughly decontaminated after use.
Fire and Explosion Hazards
When burned, the following hazardous products of combustion can occur: Oxides of carbon and nitrogen

6 ACCIDENTAL RELEASE MEASURES

In Case of Spill or Leak
Contain spill. Stop leak at source if this can be done safely. Ventilate area. Nonessential personnel should
leave the area until cleanup is completed. Pump liquid into DOT-approved drums for disposal. Absorb
remaining liquid onto inert absorbent and place in DOT approved drums for disposal. Wash area with water.
Keep concentrate and wash water from entering sewers or waterways. Consult a regulatory specialist to
determine appropriate state or local reporting requirements, for assistance in waste characterization and/or
hazardous waste disposal and other requirements listed in pertinent environmental permits.

7 HANDLING AND STORAGE

Handling
Do not get in eyes, on skin or on clothing.
Keep container closed.
Use only with adequate ventilation.
Wash thoroughly after handling.
Do not taste or swallow.



Product Code: 000287 Page 2
Revision: 10 Issued: 27 NOV 2006 of 6
DIISOPROPYLAMINOETHANOL
Material Safety Data Sheet
Arkema Inc.

7 HANDLING AND STORAGE

Keep away from heat and flame.


Emptied container retains vapor and product residue. Observe all labeled safeguards until container is
cleaned, reconditioned or destroyed. DO NOT CUT OR WELD ON OR NEAR THIS CONTAINER.

Storage
Store in well ventilated area away from heat and sources of ignition such as flame, sparks and static
electricity. Ensure that all storage and handling equipment is properly rated, grounded and installed to satisfy
electrical classification requirements. Static electricity may accumulate and create a fire hazard. All storage
containers, including containers such as drums, cylinders and IBC鈥檚, must be bonded and grounded during
filling and emptying operations. Store away from oxidizers and reactive materials. Keep container tightly
closed. Observe all federal, state and local regulations and National Fire Protection Association (NFPA)
Codes which pertain to the specific local conditions of storage and use, including OSHA 29 CFR 1910.106
and NFPA 30, 70, 77, and 497.


8 EXPOSURE CONTROLS / PERSONAL PROTECTION

Engineering Controls
Investigate engineering techniques to reduce exposures. Provide ventilation if necessary to minimize
exposures. If practical, use local mechanical exhaust ventilation at sources of air contamination such as
open process equipment. Consult ACGIH ventilation manual or NFPA Standard 91 for design of exhaust
systems.

Eye / Face Protection
Where there is potential for eye contact, wear chemical goggles and have eye flushing equipment available.

Skin Protection
Wear appropriate chemical resistant protective clothing and chemical resistant gloves to prevent skin
contact. Consult glove manufacturer to determine appropriate type glove material for given application.
Wear chemical goggles, a face shield, and chemical resistant clothing such as a rubber apron when
splashing may occur. Rinse immediately if skin is contaminated. Remove contaminated clothing promptly
and wash before reuse. Clean protective equipment before reuse. Provide a safety shower at any location
where skin contact can occur. Wash skin thoroughly after handling.

Respiratory Protection
Avoid breathing vapor or mist. Where airborne exposure is likely, use NIOSH approved respiratory
protection equipment appropriate to the material and/or its components. Full facepiece equipment is
recommended and, if used, replaces need for face shield and/or chemical goggles. If exposures cannot be
kept at a minimum with engineering controls, consult respirator manufacturer to determine appropriate type
equipment for given application. Observe respirator use limitations specified by NIOSH or the manufacturer.
For emergency and other conditions where there may be a potential for significant exposure, use an
approved full face positive-pressure, self-contained breathing apparatus or positive-pressure airline with
auxiliary self-contained air supply. Respiratory protection programs must comply with 29 CFR 搂 1910.134.


Airborne Exposure Guidelines for Ingredients

The components of this product have no established Airborne Exposure Guidelines




Product Code: 000287 Page 3
Revision: 10 Issued: 27 NOV 2006 of 6
DIISOPROPYLAMINOETHANOL
Material Safety Data Sheet
Arkema Inc.


-Only those components with exposure limits are printed in this section.
-Skin contact limits designated with a "Y" above have skin contact effect. Air sampling alone is insufficient to accurately quantitate
exposure. Measures to prevent significant cutaneous absorption may be required.
-ACGIH Sensitizer designator with a value of "Y" above means that exposure to this material may cause allergic reactions.
-WEEL-AIHA Sensitizer designator with a value of "Y" above means that exposure to this material may cause allergic skin reactions.


9 PHYSICAL AND CHEMICAL PROPERTIES

Clear, colorless to pale yellow liquid with ammonia-like odor
Appearance/Odor
pH NE
Specific Gravity 0.87 @ 22 C
Vapor Pressure < 1 mm Hg
Vapor Density NE
Melting Point NA
Freezing Point -39 C (-38.2 F)
Boiling Point 188-192 C (370.4-377.6 F)
Solubility In Water 9.2%
Solubility in Other Materials Alcohols
Evaporation Rate NE
Percent Volatile 100
Viscosity 25 cP @ 20 C
Molecular Weight 145.2
n-Octanol/Water Partition Coefficient log Pow = 1.31



10 STABILITY AND REACTIVITY


Stability
This material is chemically stable under normal and anticipated storage and handling conditions.

Incompatibility
Avoid contact with oxidizers, perchlorates, nitrates and peroxides as violent reaction may occur. All amines,
under certain conditions, may form nitrosamines; avoid mixing with Nitrite.
Hazardous Decomposition Products
None known.


11 TOXICOLOGICAL INFORMATION

Toxicological Information
Data on this material and/or its components are summarized below.

Single exposure (acute) studies indicate:
Oral - Slightly Toxic to Rats (LD50 901-1,070 mg/kg)
Dermal - Moderately Toxic to Rabbits (LD50 390 mg/kg)
Inhalation - Slightly Toxic to Rats (4-hr LC50 approximately 2.71 mg/l)
Eye Irritation - Corrosive to Rabbits
Skin Irritation - Corrosive to Rabbits (1-hr and 4-hr exposures)




Product Code: 000287 Page 4
Revision: 10 Issued: 27 NOV 2006 of 6
DIISOPROPYLAMINOETHANOL
Material Safety Data Sheet
Arkema Inc.

12 ECOLOGICAL INFORMATION

Ecotoxicological Information
Data on this material and/or its components are summarized below.

This material is practically non-toxic to fathead minnow (96-hr LC50 201 mg/l).

Chemical Fate Information
No data are available.



13 DISPOSAL CONSIDERATIONS

Waste Disposal
Incineration is the recommended method for disposal observing all local, state and federal regulations. Note:
Chemical additions to, processing of, or otherwise altering this material may make this waste management
information incomplete, inaccurate, or otherwise inappropriate. Furthermore, state and local waste disposal
requirements may be more restrictive or otherwise different from federal laws and regulations.

14 TRANSPORT INFORMATION

DOT Name Corrosive liquids, toxic, n.o.s.
DOT Technical Name (Diisopropylaminoethanol)
DOT Hazard Class 8(6.1)
UN Number UN2922
DOT Packing Group PG ll
RQ
DOT Special Information "PG based on Corrositex assay"


15 REGULATORY INFORMATION

Hazard Categories Under Criteria of SARA Title III Rules (40 CFR Part 370)
Immediate (Acute) Health Y Fire N
Reactive
Delayed (Chronic) Health N N
Sudden Release of Pressure N
The components of this product are all on the TSCA Inventory list.


Ingredient Related Regulatory Information:
CERCLA RQ SARA TPQ
SARA Reportable Quantities
(N,N-Diisopropylamino)ethanol NE

Chemical Weapons Convention
(N,N-Diisopropylamino)ethanol
New Jersey Right to Know
This product does contain the following chemical(s), as indicated below, currently on the New Jersey Right-to-Know Substances List.
(N,N-Diisopropylamino)ethanol




Product Code: 000287 Page 5
Revision: 10 Issued: 27 NOV 2006 of 6
DIISOPROPYLAMINOETHANOL
Material Safety Data Sheet
Arkema Inc.

16 OTHER INFORMATION


Revision Information

Revision Number 10
27 NOV 2006
Revision Date
Supercedes Revision Dated 26-OCT-2006
Revision Summary
Revised section 2.

Key
NE= Not Established NA= Not Applicable (R) = Registered Trademark




Arkema Inc. believes that the information and recommendations contained herein (including data and
statements) are accurate as of the date hereof. NO WARRANTY OF FITNESS FOR ANY PARTICULAR
PURPOSE, WARRANTY OF MERCHANTABILITY, OR ANY OTHER WARRANTY, EXPRESSED OR
IMPLIED, IS MADE CONCERNING THE INFORMATION PROVIDED HEREIN. The information provided
herein relates only to the specific product designated and may not be valid where such product is used in
combination with any other materials or in any process. Further, since the conditions and methods of use are
beyond the control of Arkema Inc., Arkema Inc. expressly disclaims any and all liability as to any results
obtained or arising from any use of the product or reliance on such information.




Product Code: 000287 Page 6
Revision: 10 Issued: 27 NOV 2006 of 6

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
arkema-inc_com---1428.asp 13122-18-4
arkema-inc_com---1442.asp 68-11-1
arkema-inc_com---1446.asp 124-63-0
arkema-inc_com---1449.asp 25103-09-7
arkema-inc_com---1458.asp 75-31-0
arkema-inc_com---1460.asp 624-78-2
arkema-inc_com---1461.asp 996-35-0
arkema-inc_com---1462.asp 7087-68-5
arkema-inc_com---1463.asp 5332-73-0
arkema-inc_com---290.asp 141-32-2 150-76-5
arkema-inc_com---325.asp 13355-96-9
arkema-inc_com---334.asp N/A
arkema-inc_com---337.asp 15571-58-1
arkema-inc_com---338.asp 23850-94-4
arkema-inc_com---343.asp 2273-43-0
arkema-inc_com---435.asp 75-45-6
arkema-inc_com---436.asp 1717-00-6
arkema-inc_com---445.asp 354-33-6
arkema-inc_com---446.asp 2837-89-0
arkema-inc_com---448.asp N/A
arkema-inc_com---449.asp N/A
arkema-inc_com---451.asp 420-46-2 354-33-6 811-97-2
arkema-inc_com---456.asp N/A
arkema-inc_com---458.asp N/A
arkema-inc_com---460.asp 811-97-2
arkema-inc_com---629.asp 61553-03-5
arkema-inc_com---647.asp N/A
arkema-inc_com---649.asp 68082-34-8
arkema-inc_com---651.asp 8013-07-8
arkema-inc_com---652.asp 8016-11-3
arkema-inc_com---664.asp N/A
arkema-inc_com---699.asp 814-94-8
arkema-inc_com---715.asp 406-58-6 138495-42-8
arkema-inc_com---717.asp 75-45-6
arkema-inc_com---739.asp 2404-44-6 7320-37-8
arkema-inc_com---752.asp 64742-53-6 64742-46-7
arkema-inc_com---876.asp 7659-86-1
arkema-inc_com---882.asp 100-37-8
arkema-inc_com---884.asp 96-80-0
arkema-inc_com---885.asp 624-92-0
arkema-inc_com---892.asp 108-01-0
arkema-inc_com---901.asp 105-59-9 7732-18-5
arkema-inc_com---907.asp 105-59-9 7732-18-5
arkema-inc_com---915.asp 7647-01-0 7732-18-5
arkema-inc_com---918.asp 7732-18-5 3710-84-7
arkema-inc_com---919.asp 112-55-0
arkema-inc_com---926.asp 5188-07-8 7732-18-5
arkema-inc_com---927.asp 75-66-1 624-89-5
arkema-inc_com---928.asp 75-66-1 75-33-2 107-03-9
arkema-inc_com---929.asp 75-66-1 110-01-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC