MATERIAL SAFETY DATA SHEET
Section I 鈥? Product and Company Information
庐
FastSteel Steel
Super Putty
Product Name:
CAS Number: Mixture
Hazard Rating: Health: 1 Fire: 1 Reactivity: 0 PPI: B
Swift Maintenance Products, Inc.
Company Identification: Polymeric Systems, Inc.
4592 N. Hiatus Road
723 Wheatland St.
Sunrise, FL 33351
Phoenixville, PA 19460
Contact: I. David Crossan
Telephone: (610) 935-1180
(954) 748-2555
Fax: (610) 935-7123
(954) 741-7997
Emergency Phone: (800) 424-9300 (Chemtrec - 24 hours)
Preparer: I. David Crossan
Technical Director
Proper Shipping Name: Not Regulated
Section II 鈥? Ingredient and Hazard Information
Ingredient Name CAS Number Percent TSCA Health Fire React. PPE
Glycidyl ethers of bisphenol A resins 25068-38-6 10 - 30 Y 2 1 0 B
Tri(dimethylaminomethyl)phenol 90-72-2 0.5 鈥? 1.5 Y 3 1 1 D
Section III 鈥? Physical Data
Form: Putty
Appearance/Color: Grey/Black
Odor: Sulfur/Mercaptan
Solubility: Insoluble in water
pH Value: N/A
Boiling Range: N/A
Vapor Pressure (mmHg): N/A
Melting Point: N/A
Evaporation Rate: Non-volatile
Vapor Density: Non-volatile
% Volatile Weight: 0%
VOC: <1%
Heavy Elements (ppm): 0
Specific Gravity: 1.9
Note: The physical data represented above are typical values and should not be construed as a specification. For
additional physical data and details on use, please obtain a technical data sheet for this product.
Section IV 鈥? Fire and Explosion Hazard Data
Flammability Class: IIIB
Flash Range: N/A
Explosive Range: N/A
Extinguishing Media: Water spray, foam, CO2, dry chemicals
Unusual Hazards: Aldehydes, acids, and oxides of carbon, nitrogen and sulfur.
Fire Fighting: Fire fighters and others who may be exposed to the products of combustion should be equipped
with NIOSH-approved positive pressure self-contained breathing apparatus (SCBA) and full
protective clothing.
6/7/05 N/A = Not Applicable, N/E = Not Evaluated, N/Av = Not Available Page 1 of 3
MATERIAL SAFETY DATA SHEET (cont.)
PRODUCT: FastSteel Steel
Super Putty
Section V 鈥? Health Hazard Data
Route Species Exposure and Dose
Glycidyl ethers of bisphenol A resins Oral Rat, adult LD50 5000 mg/Kg
Skin Rabbit, adult LD50 20000 mg/Kg
Tri(dimethylaminomethyl)phenol Oral Rat, adult LD50 1630 mg/Kg
Permissible Exposure Level: N/E.
Effects of Overexposure
Inhalation: None
Ingestion: May cause irritation of intestinal tract.
Skin Contact: Possible irritant and sensitizer.
Eye Contact: Possible irritant and sensitizer.
First Aid
Inhalation: Remove to fresh air.
Ingestion: Seek medical advice.
Skin Contact: Wash thoroughly with soap and water.
Eye Contact: Flush with water for at least 15 minutes. Seek medical advice.
Note: Never give anything by mouth to an unconscious person.
Section VI 鈥? Stability and Reactivity Data
Stability: This product is stable.
Hazardous Polymerization: Hazardous polymerization will not occur.
Incompatibility: None
Conditions to Avoid: None
Hazardous Decomposition Products: Aldehydes, acids and oxides of carbon, nitrogen, and sulfur
Section VII 鈥? Spill and Leak Procedures
Steps to be Taken
Spills or Leaks: Dispose of in a normal manner.
Waste Disposal Method: Incinerate in furnace or bury in landfill in accordance with all applicable regulations; not a
hazardous waste.
Section VIII 鈥? Exposure Controls/Personal Protection
Occupational Exposure Limits
ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL
Glycidyl ethers of bisphenol A resins N/E N/E N/E N/E N/E
Tri(dimethylaminomethyl)phenol 5.00 PPM N/E N/E N/E N/E
Protective Equipment Types
Eyes: Safety glasses or goggles.
Respiratory: None required unless sanding or abrading.
Gloves: Appropriate impervious gloves. Because a variety of protective gloves exist, consult glove manufacturer to
determine the proper type for a specific operation.
Other: None required.
Ventilation
General Mechanical: None required.
Local Exhaust: Only if heated above 100掳 F (38掳 C)
06/07/05 N/A = Not Applicable, N/E = Not Evaluated, N/Av = Not Available Page 2 of 3
MATERIAL SAFETY DATA SHEET (cont.)
PRODUCT: FastSteel Steel
Super Putty
Section IX Handling and Storage
Storage Temperature: <90掳 F (32掳 C)
Storage Conditions: Store in cool, dry, well-ventilated area.
Transfer: No special precautions are needed. Follow good manufacturing and handling practices.
Personal Hygiene: Wash thoroughly after handling, especially before eating, drinking, smoking and using
restroom facilities. Wash contaminated goggles, face shield, and gloves. Professionally
launder contaminated clothing before re-use.
Empty Container Precautions: Attention! This container can be hazardous when empty. Follow label cautions even after
the container is empty since empty containers could retain product residues. Do not re-use
empty containers for food, clothing, or products for human or animal consumption, or where
skin contact can occur.
Section X 鈥? Regulatory Information
SARA 313
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendment and reauthorization Act of 1986 and 40 CFR part 372:
Chemical Name CAS Weight Percent
None N/A N/A
OSHA Hazard Communication Standard
Chemical Name CAS Weight Percent
None N/A N/A
Right-to-Know
The non-hazardous ingredients in this product subject to the Pennsylvania, New Jersey, and/or Massachusetts Right-to-
Know laws are:
CAS Name
14807-96-6 Magnesium silicate hydrate
Trade Secret Polyether polymercaptan
65997-17-3 Sodium calcium magnesium silicate
NOTE:
USERS RESPONSIBILITY: A bulletin such as this cannot be expected to cover all possible individual situations. As the user has the responsibility to
provide a safe workplace, all aspects of an individual operation should be examined to determine if, or where, precautions - in addition to those described
herein - are required. Any health hazard and safety information herein should be passed on to your customers or employees as the case may be.
DISCLAMER OF LIABILITY: The information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of
handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by the use of this material. All
chemicals may present unknown health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee
that these are the only hazards that exist. Final determination of suitability of the chemical is the sole responsibility of the user. No representation or
warranties, either expressed or implied, of merchantability, fitness for a particular purpose or any other natures are made hereunder with respect to the
information refers. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.
06/07/05 N/A = Not Applicable, N/E = Not Evaluated, N/Av = Not Available Page 3 of 3
|