STATMAT ESD MAT CLEANER
E-mail: techsupport@microcare.com
#MCC-MAT (spray); #MCC-MATG (gallon);
Phone: (860) 827-0626
#MCC-MATP (5 gallon); #MCC-MATD (55 gallon)
MICROCARE CORPORATION www.microcare.com
Preparation Date: 02/02/07
595 John Downey Drive, New Britain, Connecticut, 06051, USA
Page 1 of 2
MATERIAL SAFETY DATA SHEET
1. Chemical Product and Company Identification control of symptoms and the clinical condition of the patient.
Immediate medical attention for acute overexposure is required.
Product Name: StatMat ESD Mat Cleaner.#MCC-MAT,
5. Firefighting Measures
#MCC-MATG, #MCC-MATP, #MCC-MATD
Chemical Family: A blended compound of demineralized water and
Flash Point: Not Flammable TCC
cleaning agents.
Flammable Limits in Air: Not Determined
Packaged By: MicroCare Corp., 595 John Downey Drive, New
Extinguishing Media: Not Flammable.
Britain, CT, 06051, USA CAGE/FSCM: OATV9
Special Firefighting Procedures: Evacuate personnel. Wear self
Emergency Telephone: CHEMTREC (800) 424-9300
contained breathing apparatus (SCBA) and full protective equipment.
2. Composition/Information on Ingredients Keep containers cool. Containers are not pressurized with propellant,
however, excessive heating may generate pressure within a closed
Material
container causing violent bursting and dangerous propelling of container.
Chemical Name Wt.%Range TLV Units
6. Accidental Release Measures
Demineralized Water 70.0-80.0 None Assigned
CAS# 7732-18-5
Spill or Leak: Evacuate area, absorb spilled liquid with commercial,
Isopropanol 1.0-5.0 400 ppm
nonflammable absorbent i.e. sand, vermiculite. Remove unprotected
CAS# 67-63-0
personnel. Protected personnel should remove ignition sources and shut
Tetrasodium Ethylenediaminetetraacetate <1.0 None Assigned
off fire sources. Provide ventilation. Shovel (spark proof) absorbent
CAS# 1310-73-2
material into drums and close. Do not flush to sewer.
Sodium Hydroxide <2.0 None Assigned
7. Handling and Storage
CAS# 1310-73-2
Poly(oxy-1,2-ethanediyl) <5.0 None Assigned Avoid breathing vapors or mist. Use only with adequate ventilation.
CAS# 9016-45-9 Avoid repeated or prolonged contact with eyes, skin or clothing.
Dodecylbenzene Sulfonic Acid 10.0-15.0 None Assigned Wash thoroughly after handling. Do not store in direct sunlight.
CAS# 27176-87-0 Store in cool dry place, away from heat.
Quaternary Ammonium Compounds <5.0 None Assigned
8. Exposure Controls/Personal Protection
CAS# 68071-95-4
Eye Protection:Use chemical protective safety glasses.
Diethanol Amide of Coconut Fatty Acid <5.0 None Assigned
Protective Clothing: Where there is potential for skin contact, use
All components of this material are listed on the TSCA inventory. appropriate impervious gloves, apron, pants and jacket.
Exposure Guidelines: Applicable Exposure Limits.
3. Hazard Identification Isopropanol:
Emergency Overview: Not Flammable. Colorless liquid with a mild PEL (OSHA) 400 ppm TWA
odor. Liquid will irritate eyes on exposure. Keep away from children. TLV (ACGIH) 400 ppm TWA
Potential Health Effects:
Eyes: Mild irritant. Persons wearing contact lenses should wear chemical
NFPA, NPCA-HIMIS RATING:
protective safety glasses when exposed to this product.
Health 0
Skin: For prolonged repeated contact: dry/chapped skin.
Flammability 1
Ingestion: Can cause nausea, stomach cramps, vomiting, diarrhea.
Reactivity 0
Inhalation: No observable effects of overexposure.
4. First Aid Measures Personal Protection rating to be supplied by user depending on use condi-
tions.
Eyes: Immediately flush with water. Remove any contact lenses and
9. Physical and Chemical Properties
continue flushing for 15 minutes, lifting eyelids occasionally until
no evidence of the chemical remains. If irritation develops or
Physical Form: Clear blue liquid
persists call a physician.
Odor: Mild
Skin: Wash promptly with soap and water. Remove and wash
Boiling Point: 100o C / 212o F
contaminated clothing and shoes before reuse.
pH: 7.2
Ingestion: If conscious, immediately give 2-4 glasses of water. Do
Solubility in Water: Complete
not induce vomiting. Do not give stimulants. Never give anything
Specific Gravity: .9 @ 15o C / 60o F
by mouth to an unconscious person. Call a physician.
% Volatile by Weight: >70
Inhalation: Remove to fresh air. Keep person calm. If not breath- Vapor Pressure: Not determined
Density:
ing, give artificial respiration. If breathing is difficult, give oxygen. 1.03
Call a physician.
Note to Attending Physician: There is no specific antidote to
overexposure. Treatment of overexposure should be directed at the
MicroCare MSDS: StatMat ESD Mat Cleaner (#MCC-MAT; #MCC-MATG; #MCC-MATP, #MCC-MATD) Page 2 of 2
10. Reactivity 15. Regulatory Information
Chemical Stability: Material is stable. Section 313 Supplier Information: This material contains the following
Hazardous Polymerization: Will not occur. toxic chemicals subject to the emergency reporting requirements of
Incompatibilities: Avoid strong oxidizers. Section 313 of the Emergency Planning and Community Right to Know
Decomposition Products: Burning may produce carbon monox- Act of 1986 and 40 CFR 372:
ide and/or carbon dioxide. CAS# Chemical Name % by Weight
None
11. Toxicological Information This information must be included in all MSDSs that are copied and
distributed for this material.
Carcinogenicity: None of the components present in ESD Mat Cleaner
Title III Hazard Communications Sections 311, 312
are listed by IARC, NTP, OSHA or ACGIH as a carcinogen.
Acute Yes
12. Ecological Information Chronic No
Fire No
None available. Reactivity No
13. Disposal Considerations 16. Other Information
Waste Disposal: Treatment, storage, transportation, and disposal must For additional information, contact Tech Support at MicroCare:
be in accordance with applicable Federal, State/Provincial and Local Telephone (860) 827-0626 or email: techsupport@microcare.com
regulations.
14. Transportation Information
Transport for ESD Mat Cleaner:
Ground Transport: Liquid Cleaning Compound N.O.S. Not Hazard-
ous, Not Regulated
Air Transport: Liquid Cleaning Compound N.O.S. Not Hazardous,
Not Regulated
|