Technical Specification
All-Purpose Mold Release
鈥? High-Purity General-Purpose Technical Details
Chemical Family Silicone Based
Silicone Mold Release Agent
Appearance Clear, Colorless Liquid
鈥? Fast-Drying for Quick Cycles Aroma Slight, Ethereal
Viscosity (cSt) ~350
鈥? Delivers Exceptionally Smooth, Evaporation >1 (Ether = 1)
Even Coatings Health, Safety & Environmental Data
鈥? Solventless Formulation for Safety Rating Nonflammable, per ASTM
methods for aerosols
Maximum Plastic Compatibility NFPA Health: 1; Fire: 2; Reactivity: 1
Ozone Impact Zero
This product has been tested on a wide variety of substrates. No major incomat-
ibilities were observed. Test before prolonged use.
General Information Packaging
The MRA All-Purpose Mold Release Aerosol 12 oz. / 340 g MCC-MRA01
from MicroCare is engineered to deliver
Packaged in cases of twelve (12) cans per box. Shelf life is unlimited. MSDS
smooth, even and consisent coatings sheets are available from MicroCare or on the web.
during the molding process. It provides
Related Products
maximum in through-put and productivity
MicroCare also offers food-grade and medical-grade mold release agents, as well
while balancing environmental, economic as a dry-film lubricant and mold release, VDX Dry Lubricant Spray.
and safety concerns. For cleaning molds, MicroCare recommends VeriClean鈩?, an exceptional light
degreaser and silicone cleaner which speeds the removal of silicone deposits.
Other products include the TidyPen庐 to remove labels, tapes and adhesives,
Precision Optical Cleaner for cleaning lenses and photonic devices, and lint-free
About the Product wipes for every sort of cleaning task.
The MRA All-Purpose Mold Release is a versatile, cost-effective solventless Product Notes
formulation engineered for use on solvent-sensitive plastics. The release has AVAILABILITY. This product is available from MicroCare distributors world-wide.
a very low viscosity, so the lubricating film enhances the molding of even Find your local distributor at www.MicroCare.com. Contact your local distributor
for details on shipping.
the finest details. The product lays up quickly, which reduces cycle times by
TRADEMARKS. 鈥淢icroCare鈥? and the MicroCare logo are registered trademarks
eliminating lost time waiting for solvent carriers to evaporate. It will not affect of MicroCare Corp.
plastics. DISCLAIMER. The information set forth herein is based on data believed to be
reliable, but MicroCare makes no warranties express or implied as to its accuracy
MRA is a nonpaintable silicone-based release agent. Engineered for typical and assumes no liability arising out of its use by others. This publication is not
injection molding processes, it also is suitable for stamping, vacuum- to be taken as a license to operate under, nor to infringe upon, any patents not
herein expressly described.
forming, RIM, compression, extrusion, casting and lay-up operations. Plastic-
compatibility is a strength for this formulation, and it is ideal for use with ABS,
resins, acetyls, melamines, methacrylates, nylon, polyethylene, polycarbonate,
polystyrene, polypropylene, polyurethane, and natural and synthetic rubber.
MicroCare specializes in performance-enhancing packaging and this aerosol
benefits from this expertise. The canister nozzle is engineered to dispense a
finely-atomized, even mist onto the mold surface. This creates a thin barrier
of siliconized release agent which allows increases in productivity and profits
with faster shot cycle times and fewer rejects.
MicroCare Corporation
595 John Downey Drive, New Britain, CT 06051 USA
MicroCare is
Tel: 860.827.0626 Fax: 860.827.8105
ISO 9001:2000
In North America, Dial: 800.638.0125
Registered
Email: TechSupport@MicroCare.com
On the Web: www.MicroCare.com
MCC-MRA PRODUCT SPEC PS-119 Rev. 7/25/2007 Replaces 4/5/2007 Page 1 of 1
|