Material Safety Data Sheet
Revision Date: 01/11/2005 Issue date: 01/11/2005
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product name: No More Leaks(TM) White Threaded Plastic Pipe Item No. : 80724
Sealant
Product type: Sealant Region: United States
Company address: Contact Information:
Henkel Corporation Telephone: 860.571.5100
1001 Trout Brook Crossing Emergency telephone: 860.571.5100
Rocky Hill, Connecticut 06067 Internet: www.loctite.com
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components % ACGIH TLV OSHA PEL OTHER
Talc 30-60 2 mg/m鲁 TWA respirable = 20 mppcf TWA 50 ppm
14807-96-6 fraction, particulate matter
containing no asbestos
and < 1% crystalline silica
Modified maleic resin 10-30 None None None
65997-11-7
Isopropyl alcohol 10-30 200 ppm TWA 400 ppm TWA None
67-63-0 400 ppm STEL 980 mg/m鲁 TWA
Poly (olylethylene) oleate 10-30 None None None
Proprietary
Titanium dioxide 1-5 10 mg/m鲁 TWA 15 mg/m鲁 TWA total dust None
13463-67-7
Silica, quartz 0.1-1 0.05 mg/m鲁 TWA 0.1mg/m鲁 TWA None
14808-60-7 respirable fraction (respirable)
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
HMIS:
Physical state: Liquid/paste HEALTH: 2*
Color: White FLAMMABILITY: 3
Odor: Alcoholic PHYSICAL HAZARD: 0
Personal Protection: See Section 8
WARNING: FLAMMABLE LIQUID AND VAPOR.
CAUSES EYE IRRITATION.
MAY CAUSE SKIN IRRITATION.
MAY CAUSE RESPIRATORY TRACT IRRITATION.
Relevant routes of exposure: Ingestion, Inhalation, Eye contact, Skin contact
Potential Health Effects
Inhalation: Vapors and mist irritate the respiratory tract and nasal passages.
Skin contact: May cause skin irritation.
Eye contact: Contact with eyes will cause irritation.
Item No. : 80724 Product name: No More Leaks(TM) White Threaded Plastic Pipe Sealant
1 of 5
Ingestion: May cause irritation to the gastrointestinal tract, mouth and mucous membranes.
Existing conditions aggravated by Eye, skin, and respiratory disorders.
exposure:
See Section 11 for additional toxicological information.
4. FIRST AID MEASURES
Inhalation: Remove to fresh air. If discomfort persists seek medical attention.
Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing
and shoes. Get medical attention if symptoms develop and persist.
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Ingestion: DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth
to an unconscious person. Get medical attention immediately.
5. FIRE-FIGHTING MEASURES
Flash point: 35.5掳C (96掳F) Tagliabue closed cup
Autoignition temperature: 398.3掳C (750掳F) estimated
Flammable/Explosive limits-lower %: 2.3 %
Flammable/Explosive limits-upper %: 12.7 %
Extinguishing media: Use dry chemical, CO2, water spray or `alcohol` foam.
Special fire fighting procedures: None
Unusual fire or explosion hazards: None
Hazardous combustion products: Irritating organic fragments.
6. ACCIDENTAL RELEASE MEASURES
Environmental precautions: No information available
Clean-up methods: Remove all ignition sources. Maintain good ventilation for large spills. Soak up with inert absorbent.
Store in a closed container until ready for disposal.
7. HANDLING AND STORAGE
Handling: Use only with adequate ventilation. Do not get on skin or clothing. Do not get in eyes. Keep away from
heat, spark and flame.
Storage: Store away from heat, sparks, flames, or other sources of ignition. Store in original container until ready
to use.
Incompatible products: Oxidizing agents.
For information on product shelf life contact Henkel Customer Service at (800) 243-4874.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Item No. : 80724 Product name: No More Leaks(TM) White Threaded Plastic Pipe Sealant
2 of 5
Engineering controls: Use local ventilation if general ventilation is insufficient to maintain vapor concentration below
established exposure limits.
Respiratory protection: Use NIOSH approved respirator if there is potential to exceed exposure limit(s).
Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact.
Eye/face protection: Chemical splash goggles or safety glasses with side shields.
See Section 2 for exposure limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: Liquid/paste
Color: White
Odor: Alcoholic
Vapor pressure: 33 mmHg at 20 潞C (68 掳F)
pH: Not applicable
Boiling point/range: 82.2掳C (180掳F) estimated
Melting point/range: Not available
Specific gravity: 1.37
Vapor density: 2.07
Evaporation rate: 7.7 (Ether = 1)
Solubility in water: Partial
Partition coefficient (n-octanol/water): Not determined
VOC content: 15.2% (EPA Method 24)
10. STABILITY AND REACTIVITY
Stability: Stable.
Hazardous polymerization: Will not occur.
Hazardous decomposition products: None reasonably foreseeable
Incompatability: Oxidizing agents.
Conditions to avoid: Heat, flames and sparks.
11. TOXICOLOGICAL INFORMATION
Carcinogen Status
Hazardous components NTP Carcinogen IARC Carcinogen OSHA Carcinogen
Talc No No No
14807-96-6
Modified maleic resin No No No
65997-11-7
Isopropyl alcohol No No No
67-63-0
Poly (olylethylene) oleate No No No
Proprietary
Titanium dioxide No No No
13463-67-7
Silica, quartz Known Carcinogen Group 1 Yes
14808-60-7
Literature Referenced Target Organ & Other Health Effects
Item No. : 80724 Product name: No More Leaks(TM) White Threaded Plastic Pipe Sealant
3 of 5
Hazardous components Health Effects/Target Organs
Talc Some evidence of carcinogenicity, Lung, Irritant
14807-96-6
Modified maleic resin No data
65997-11-7
Isopropyl alcohol Allergen, Blood, Central nervous system, Irritant, Kidney, Liver, Brain, Spleen
67-63-0
Poly (olylethylene) oleate No data
Proprietary
Titanium dioxide Irritant, Respiratory
13463-67-7
Silica, quartz Some evidence of carcinogenicity, Lung, Immune system
14808-60-7
12. ECOLOGICAL INFORMATION
Ecological information: Not available
13. DISPOSAL CONSIDERATIONS
Information provided is for unused product only.
Recommended method of disposal: Dispose of in accordance with Federal, State and local regulations.
EPA hazardous waste number: D001: Ignitable.
14. TRANSPORT INFORMATION
The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be
different for bulk packaging.
U.S. Department of Transportation Ground (49 CFR):
Proper shipping name: RESIN SOLUTION
Hazard class or division: 3
Identification number: UN 1866
Packing group: III
Exceptions: Consumer Commodity ORM-D (Not more than 5L)
International Air Transportation (ICAO/IATA):
Proper shipping name: RESIN SOLUTION
Hazard class or division: 3
Identification number: UN 1866
Packing group: III
Exceptions: Consumer Commodity, ID 8000, Class 9 (Not more than 500 ml)
WaterTransportation (IMO/IMDG):
Proper shipping name: RESIN SOLUTION
Hazard class or division: 3
Identification number: UN 1866
Packing group: III
Item No. : 80724 Product name: No More Leaks(TM) White Threaded Plastic Pipe Sealant
4 of 5
15. REGULATORY INFORMATION
United States Regulatory Information
TSCA 8 (b) Inventory Status: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.
TSCA 12 (b) Export Notification: None.
CERCLA/SARA Section 302 EHS: None.
CERCLA/SARA Section 311/312: Immediate Health Hazard, Delayed Health Hazard, Fire
CERCLA/SARA 313: None above reporting de minimus.
California Proposition 65: This product contains a chemical known to the State of California to cause cancer and birth defects or
other reproductive harm.
Canada Regulatory Information
CEPA DSL/NDSL Status: All components are listed on or are exempt from listing on the Domestic Substances List.
WHMIS hazard class: B.2, D.2.B
16. OTHER INFORMATION
This material safety data sheet contains changes from the previous version in sections: Revised to new format.
Prepared by: Dan Shaw, Product Safety and Regulatory Affairs Specialist
DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation
does not assume responsibility for any results obtained by persons over whose methods Henkel Corporation has no control. It is the
user's responsibility to determine the suitability of Henkel's products or any production methods mentioned herein for a particular
purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be
involved in the handling and use of any of Henkel Corporation's products. In light of the foregoing, Henkel Corporation specifically
disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale
or use of Henkel Corporation's products. Henkel Corporation further disclaims any liability for consequential or incidental damages of
any kind, including lost profits.
Item No. : 80724 Product name: No More Leaks(TM) White Threaded Plastic Pipe Sealant
5 of 5
|