Black Foam Primer Page 1
MSDS Number: CTGO00PRM0002 August 18, 2004
________________________________________
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
______________________
Product Identification
Product Name: Black Foam Primer
Product Number: pails, drums, totes
Chemical Name: Water-based acrylic primer
CAS Number: Blend
Company Identification
______________________
ERSystems - Elastomeric Roofing Systems, Inc
6900 Bleck Dr
Rockford, MN 55373 USA
1-800-403-7747 (For product information)
1-800-535-5053 Infotrac (For emergencies)
2. COMPOSITION/INFORMATION ON INGREDIENTS
COMPONENT LISTING:
Chemical Name
_____________ ________
Amount CAS Number
__________
ETHYLENE GLYCOL < 2.0 % 107-21-1
(See Section 8 for exposure guidelines)
(See Section 15 for regulatory information)
3. HAZARDS IDENTIFICATION
***************** EMERGENCY OVERVIEW *****************
* *
* CAUTION *
* *
* Prolonged or repeated contact may cause skin or eye *
* irritation. May be harmful if swallowed. Protect *
* from freezing. *
* *
**********************************************************
Black Foam Primer Page 2
MSDS Number: CTGO00PRM0002 August 18, 2004
____________________________________________________________________________________________________
(section 3 continued)
HMIS Rating - Health: 1
Flammability: 0
Reactivity: 0
Personal Protection Index: J
POTENTIAL HEALTH EFFECTS
EYE:
Contact may cause eye irritation.
SKIN:
Can cause moderate skin irritation.
4. FIRST AID MEASURES
EYE CONTACT FIRST AID:
After initial flushing, remove any contact lenses and continue flushing
for at least 15 minutes. Get medical attention if irritation develops or
persists.
SKIN CONTACT FIRST AID:
Remove contaminated clothing and shoes. Wash affected area immediately
with large amounts of soap and water. Get medical attention if irritation
develops or persists.
INHALATION FIRST AID:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. Get medical attention if cough or other symptoms develop.
INGESTION FIRST AID:
Get immediate medical attention. Never give anything by mouth to an
unconscious person.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
TCC Flash Point: 120.0 C (248.0 F)
Autoignition Temperature: N/A
FLAMMABLE LIMITS IN AIR
LEL: N/A
UEL: N/A
Black Foam Primer Page 3
MSDS Number: CTGO00PRM0002 August 18, 2004
____________________________________________________________________________________________________
(section 5 continued)
EXTINGUISHING MEDIA:
Water, carbon dioxide, foam or dry powder.
FIRE & EXPLOSION HAZARDS:
No known unusual hazards in a fire/explosion situation.
FIRE FIGHTING INSTRUCTIONS:
As in any fire, wear self-contained breathing apparatus pressure-demand
MSHA/NIOSH (approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
SAFEGUARDS (PERSONNEL):
Wear safety goggles. Wear appropriate personal protective equipment.
INITIAL CONTAINMENT:
Contain spilled material. Absorb spills with inert material.
LARGE SPILLS PROCEDURE:
Absorb spill with inert material (e g, dry sand or earth), then place in a
chemical waste container.
7. HANDLING AND STORAGE
RECOMMENDED STORAGE TEMPERATURE
Minimum: 15.6 C (60.1 F)
Maximum: 26.7 C (80.1 F)
SHELF LIFE: (in original, sealed containers)
8 months @ 26.7 C
HANDLING (PERSONNEL):
Avoid prolonged or repeated contact with skin. Wash hands thoroughly
after handling.
HANDLING (PHYSICAL ASPECTS):
Agitate containers before use. Keep from freezing. Keep out of reach of
children.
STORAGE PRECAUTIONS:
Avoid extreme temperatures. Keep container closed when not in use. Store
in a cool dry place.
Black Foam Primer Page 4
MSDS Number: CTGO00PRM0002 August 18, 2004
____________________________________________________________________________________________________
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EYE / FACE PROTECTION REQUIREMENTS:
Wear safety glasses. A respiratory protection program that meets OSHA's
29 CFR 1910-134 and ANSI Z88-2 requirements must be followed whenever
workplace conditions warrant a respirator's use.
SKIN PROTECTION REQUIREMENTS:
Selection of specific items such as gloves, boots, apron or full-body suit
will depend on operation. Wash hands thoroughly after handling.
RESPIRATORY PROTECTION REQUIREMENTS:
When there is potential for airborne exposures in excess of applicable
limits, wear NIOSH/MSHA approved respiratory protection.
EXPOSURE GUIDELINES:
ETHYLENE GLYCOL
OSHA Ceiling Limit: 50 ppm, 125 mg/m^3
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM ...............................: Liquid
COLOR ..............................: Black
ODOR ...............................: Faint Odor
BOILING POINT ......................: 212 F
SOLUBILITY IN WATER ................: Miscible
SPECIFIC GRAVITY ...................: 1.5 (Water = 1)
MELTING/FREEZING POINT .............: 32 F
PH .................................: 8.5 to 9.5
VISCOSITY ..........................: 7,000 to 10,000 cps
VOLATILE ORGANIC COMPOUNDS (VOC) ...: 0.13 lb/gallon
10. STABILITY AND REACTIVITY
STABILITY:
Stable.
POLYMERIZATION:
Product will not undergo polymerization.
DECOMPOSITION:
Decomposition will not occur if handled and stored properly.
Black Foam Primer Page 5
MSDS Number: CTGO00PRM0002 August 18, 2004
____________________________________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
No information available.
12. ECOLOGICAL INFORMATION
No information available.
13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL:
Treat or dispose of waste material in accordance with all local,
state/provincial, and national requirements.
14. TRANSPORTATION INFORMATION
PRODUCT LABEL ..........: Black Foam Primer
D.O.T. SHIPPING NAME ...: N/A
D.O.T. HAZARD CLASS ....: Non-Hazardous
15. REGULATORY INFORMATION
Canadian Disclosure List
ETHYLENE GLYCOL (107-21-1)
SARA Title III - Section 313
ETHYLENE GLYCOL (107-21-1)
Title V
ETHYLENE GLYCOL (107-21-1)
SC Toxic Air Pollutants List
ETHYLENE GLYCOL (107-21-1)
Black Foam Primer Page 6
MSDS Number: CTGO00PRM0002 August 18, 2004
____________________________________________________________________________________________________
16. OTHER INFORMATION
PREPARED BY .......: Laura Vollenweider
APPROVED BY .......: Laura Vollenweider
TITLE .............: Chemist
APPROVAL DATE .....: July 31, 2003
SUPERCEDES DATE ...: New
MSDS NUMBER .......: CTGO00PRM0002
RTN NUMBER ........: 00000021 (Official Copy)
ADDITIONAL INFORMATION:
The data in this Material Safety Data Sheet relates only to the specific
material designated herein.
**********************************************************************
To the best of our knowledge, the information contained in this MSDS is
accurate. It is intended to assist the user in his evaluation of the
product's hazards, and safety precautions to be taken in its use. The
data in this MSDS relate only to the specific material designated herein.
We do not assume liability for the use of, or reliance on this
information, nor do we guarantee its accuracy or completeness.
**********************************************************************
END OF MSDS
**********************************************************************
|