MATERIAL SAFETY DATA SHEET N.A.=Not Applicable
(SIMILAR TO OSHA FORM 174) Not Est.=Not Established
Prop.=Proprietary
SECTION 1-MANUFACTURER/DISTRIBUTOR INFORMATION
Product Name: END ODOR Water Based Heavy Duty All Purpose Counteractant
Supplier's Name: INSCO, Inc.
Supplier's Address: 1611 Ralston Street, Wilson, NC 27893 Emergency Phone # : (800)-849-1133
HMIS Hazard Code: Health:1 Flammability:2 Reactivity:0 Other:0 Chemical Name: N.A. Proprietary Blend
Chemical Family: Odor Control Agent Formula: N.A. Blended Product
D.O.T. Shipping Name: N/A Hazard Class: N/A D.O.T ID#: N/A
SECTION 2-HAZARDOUS INGREDIENTS
CHEMICAL NAME CAS NO. % Concentrate Range Hazard Ratings (TLV/PEL)
Polyethylene Mono(Nonylphenol) Ether Glycol 9016-45-9 PROP. Not Est.
SECTION 3-PHYSICAL DATA SECTION 4-FIRE AND EXPLOSION DATA
Boiling Point (F): 2120 Flash Point (F): 1760F (TCC)
Specific Gravity: 1.02
Vapor Pressure: = To Water Evaporation Rate: = To Flammable Limits: Not Est.
Vapor Density: = To Water Water Unusual Fire & Explosion Hazards: Heated product may
Solubility In Water: Complete liberate toxic fumes. Wear self contained breathing apparatus.
Appearance: Clear, Thin, Straw Heated product may also form explosive mixtures in air. Remove
Liquid from fire area or if not possible keep cool.
Odor: Moda
SECTION 5-HEALTH HAZARD DATA
Route(s) of Entry: Inhalation:Yes Skin:Yes Ingestion:Yes Threshold Limit Value: Not Est.
Effects of Overexposure: May cause skin and eye irritation. If ingested may cause severe gastric and mucosal damage. May cause
systemic intoxication.
Emergency & First Aid Procedures: For Eyes: Flush with water for at least fifteen minutes. Get medical aid. For Skin: Thoroughly
wash with soap and water. If irritation persists get medical aid. If Ingested: Do not induce vomiting. Give milk, gelatin, egg whites, or
a large quantity of water. Get immediate medical aid.
Conditions Aggravated by Exposure: May aggravate any pre-existing pulmonary condition.
Listed Carcinogen, Mutagen, Teratogen (Ingredient, Source, Amount): None
SECTION 6-REACTIVITY DATA SECTION 7-SPILL OR LEAK PROCEDURES
Steps to be taken if material is released or spilled: Venti-
Stability: Stable
late area and recontainerize by mopping, wet vacuum, or the
Conditions to Avoid: None
use of a suitable absorbent.
Incompatibility: Acids and Oxidizers
Waste disposal method: Follow local, state, and federal
Hazardous Decomposition Products: Carbon Oxides and
regulations.
Aldehydes
Hazardous Polymerization: Will not occur.
SECTION 9-SPECIAL PRECAUTIONS
SECTION 8-SPECIAL PROTECTION INFORMATION
Respiratory Protection: None required. Precautions to be taken in handling and storage: Store
Ventilation: Local. between 400 and 1200 F.
Protective Gloves: None required. Other Precautions: Keep out of reach of children. For sale to,
Eye Protection: Glasses. use and storage by service personnel only.
Other Protective Equipment: None; avoid contamination of
clothing
The information contained in this MSDS was obtained from current and reliable sources, however the data is provided without any warranty, expressed
or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of this
company, it is not responsible for loss, injury and expense arising out of the product's improper use. No warranty, expressed or inferred, regarding the
product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regula-
tions regarding the transportation, handling, storage, use or disposal of this product which may not be covered by this MSDS. The user is responsible
for full compliance.
DATE PREPARED-10/05/00 By: G.C.
|