Material Safety Data Sheet
The following components of ProZyme products are of the composition described below.
Component Product Code Product Name
M3 Re-N-Acetylation Reagent (WS0074) GK50102 Monosa ccha ride C om positio n Hy droly sis
Reagen t Pack
H3 Re-N-Acetylation Reagent (WS0157) GK50202 Gly coRelea se鈩? Glycan H ydra zinoly sis Kit
Composition Acetic anhydride
CAS # 108-24-7
Hazard identification Combustible (US A). Flam mable (EU). Corrosive. Reacts violently w ith
wa ter. Ha rmfu l by inhalation an d if sw allow ed. Lachry ma tor.
First aid measures IF IN DOU BT SEEK M EDICAL ADV ICE.
Imme diately remove any clothing soiled by product. Symptoms m ay be
dela yed , me dical o bserv ation fo r 48 hours follow ing exposure is
recommende d.
In ca se of con tact:
Eyes and skin - irrigate with ple nty of w ater for at least 15 m inutes.
Ingestion - drink plenty of water. OBTAIN MEDICAL ATTENTION
Inhalation - move to a well ve ntilated area and clear nose a nd thro at; if
needed provide artificial respiration. Keep patient warm.
Fire fighting measures Carbon dioxide, dry chemical powder powder or appropriate foam. Do not
use water. Specific hazards: Combustible liquid. Emits toxic fumes under
fire conditions.
Accidental release measures Wear appro priate protective clothing. Ab sorb w ith liquid bindin g m aterial.
Colle ct and kee p in a closed con tainer and h old for d isposal (see below).
Ventilate and wash spill site after material pickup is complete.
Handling/ex posu re con trols Handle in accordance with Good Laboratory Practice. Use only in a
che mical fum e ho od. Wear appropria te protective clo thing (sa fety
spectacles, gloves, laboratory coat). Ensure good ventilation.
Storage Store at room temperature in a cool dry place. Keep tightly closed. Keep
away from heat and open flame.
1933 Davis Street, Suite 207 (800) 457-9444 info@prozyme.com
TOLL FREE E-MAIL
San Leandro, CA 94577-1258 (510) 638-6900 www.prozyme.com
PHONE WEB
(510) 638-6919
FAX
P ro Z ym e 庐 , Glyko庐 and GlycoRelease鈩? are trademarks of ProZyme, Inc., San Leandro, CA USA 031705AB
Physical/chemical properties Colorless liquid. Melting Point: -73掳C. Boiling Point: 139掳C.
Flash Poin t: 49掳C (12 0掳 F). Explosion limits: 2.74 (low er), 10.3% (uppe r).
Stab ility a nd re activ ity Stable. Do not allow w ater to enter container because of violent reaction.
Toxicological information Cau ses bu rns. Harm ful if sw allow ed or inhale d. Material is extreme ly
destructive to the tissue of the mu cous me mb ranes and upp er resp iratory
tract. May be harmful if absorbed through the skin. Lachrymator. To the
best of our know ledg e, the toxicologica l, carcinogenic an d m utage nic
properties have not been thoroughly investigated.
Ecological information Data not available.
Disposal information Cle an u p w ith ab sorp tive ma teria l and han d ov er to hazardous wa ste
disposers. Dispose of according to local regulations. Do not allow to reach
sewage system.
Transport information Contact ProZyme for transportation information.
Regulatory information CAS # 108-24-7 is listed on the TSCA inventory.
The above information is supplied in good faith and is believed to be correct. It does not claim to be all-inclusive and is intended to
be used only as a guide. Final determination of the suitability of any material is the sole responsibility of the user. ProZyme shall not
be held liable for any damage resulting from handling or contact with the above product. This product is intended for in vitro
research only.
|