ZEP Inc.
11627 178th Street
Material Safety Data Sheet
Edmonton, Alberta T5S 1N6
1-800-I-877-I-BUY-ZEP (428-9937)
www.zep.com
Section 1. Chemical Product and Company Identification
Product name INDUSTRIAL FALLOUT REMOVER
Industrial fallout remover
Product use
Product code 0529
Date of issue Supersedes 02/28/05
02/27/08
Emergency Telephone Numbers
For MSDS Information:
Technical Services Group
Telephone (780) 453-8100
(Business Hours 8:00am - 5:00pm)
For Medical or Transportation Emergency
CANUTEC (24 Hours)
(613) 996-6666 - Call Collect
Prepared By
Technical Services Group
Printing date: 27/02/08
11627 178th Street
Edmonton, Alberta T5S 1N6
Section 2. Hazards Identification
Emergency overview
WARNING !
HARMFUL IF SWALLOWED.
Toxic if swallowed. Do not breathe vapor or mist. Do not ingest. Avoid contact with
eyes, skin and clothing. Wash thoroughly after handling.
NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse effects are lessened by following all
prescribed safety precautions, including the use of proper personal protective equipment.
Dermal contact. Inhalation.
Acute Effects Routes of Entry
Severely corrosive to the eyes. Causes severe burns.
Eyes
Severely corrosive to the skin. Causes severe burns.
Skin
Inhalation May give off gas, vapor or dust that is very irritating or corrosive to the respiratory system.
Exposure to decomposition products may cause a health hazard. Serious effects may be delayed
following exposure.
Ingestion Toxic if swallowed. May cause burns to mouth, throat and stomach.
Prolonged or repeated contact with skin or mucous membrane may result in irritation symptoms,
Chronic effects
such as redness, blistering, dermatitis etc. Repeated or prolonged exposure to spray or mist may
produce respiratory tract irritation leading to frequent attacks of bronchial infection.
Additional Information: See Toxicological Information (Section 11)
Section 3. Composition/Information on Ingredients
Name of Hazardous Ingredients CAS number % by Weight
68439-46-3 7 - 13
ALCOHOLS, C9-11, ETHOXYLATED; linear primary alcohol ethoxylate
6153-56-6 1-5
OXALIC ACID, DIHYDRATE; Ethanedioic Acid
68439-46-3 7 - 13
ALCOHOLS, C9-11, ETHOXYLATED; linear primary alcohol ethoxylate
Section 4. First Aid Measures
Get medical attention immediately. Immediately flush eyes with plenty of water, occasionally lifting the upper
Eye Contact
and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Chemical
burns must be treated promptly by a physician.
Get medical attention immediately. Wash contaminated skin with soap and water. Remove contaminated
Skin Contact
clothing and shoes. Wash contaminated clothing thoroughly with water before removing or wear gloves.
Continue to rinse for at least 10 minutes. Chemical burns must be treated promptly by a physician. Wash
clothing before reuse. Clean shoes thoroughly before reuse.
Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide
Inhalation
artificial respiration or oxygen by trained personnel. Get medical attention immediately.
If material has been swallowed and the exposed person is conscious, give small quantities of water to drink.
Ingestion
Never give anything by mouth to an unconscious person. Do not induce vomiting unless directed to do so by
medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get
medical attention immediately.
Page: 1/3
Product Name INDUSTRIAL FALLOUT REMOVER
Material Safety Data Sheet
Product code 0529
Section 5. Fire Fighting Measures
Non-combustible.
Flash Point
Flammable Limits Not available.
Non-flammable.
Flammability
Auto-ignition Temperature
Fire-fighters should wear appropriate protective equipment and self-contained breathing
Fire-Fighting Procedures
apparatus (SCBA) with a full face-piece operated in positive pressure mode. In case of fire, use
water spray (fog), foam or dry chemical.
In a fire or if heated, a pressure increase will occur and the container may burst.
Fire hazard
carbon oxides (CO, CO2) sulfur oxides (SO2, SO3 etc.) nitrogen oxides (NO, NO2 etc.)
Products of Combustion
Not available.
Explosion hazard
Section 6. Accidental Release Measures
Put on appropriate personal protective equipment (see section 8). Stop leak if without risk. Dilute with water
Spill Clean up
and mop up if water-soluble or absorb with an inert dry material and place in an appropriate waste disposal
container. Dispose of via a licensed waste disposal contractor.
Section 7. Handling and Storage
Put on appropriate personal protective equipment (see section 8). Do not get in eyes or on skin or clothing. Do not
Handling
breathe vapor or mist. Do not ingest. If during normal use the material presents a respiratory hazard, use only with
adequate ventilation or wear appropriate respirator. Keep in the original container or an approved alternative made
from a compatible material, kept tightly closed when not in use. Wash thoroughly after handling.
Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible
Storage
materials (see section 10) and food and drink. Store between the following temperatures: 40掳F - 120掳F (4.4掳C - 49掳C).
Separate from alkalis. Segregate from oxidizing materials. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in
unlabeled containers. Keep out of the reach of children.
Section 8. Exposure Controls/Personal Protection
Product name Exposure limits
Oxalic Acid, Dihydrate ACGIH TLV (United States).
TWA: 1 mg/m鲁 8 hour(s).
Personal Protective Equipment (PPE)
Recommended: splash goggles
Eyes
Recommended: Neoprene gloves. Nitrile gloves. Rubber gloves.
Hands and
Synthetic apron.
Body
Use with adequate ventilation. Provide exhaust ventilation or other engineering
Respiratory
controls to keep the airborne concentrations of vapors below their respective
occupational exposure limits. A respirator is not needed under normal and
intended conditions of product use.
Section 9. Physical and Chemical Properties
Liquid. Color Colorless. to Amber. Clear.
Physical State
1.5 - 2.5 Odor Mild. [Slight]
pH
102掳C (215.6掳F) Vapor Pressure Not available.
Boiling Point
1.067 Vapor Density Not available.
Specific Gravity
Easily soluble in the following materials: cold water Evaporation Rate 1 (Water = 1)
Solubility
and hot water.
VOC (Consumer) 0 (g/l).
not available
Freezing Point
Section 10. Stability and Reactivity
The product is stable.
Stability and Reactivity
Reactive or incompatible with the following materials: oxidizing materials and alkalis.
Incompatibility
Hazardous Polymerization Will not occur.
Hazardous Decomposition Products Under normal conditions of storage and use, hazardous decomposition products should not be
produced.
Page: 2/3
Product Name INDUSTRIAL FALLOUT REMOVER
Material Safety Data Sheet
Product code 0529
Section 11. Toxicological Information
Carcinogenicity No known significant effects or critical hazards.
Acute Toxicity
Product/ingredient name Result Species Dose Exposure
Ethoxylated Alcohols LD50 Dermal Rabbit >2000 mg/kg -
LD50 Oral Rat 1400 mg/kg -
Oxalic Acid, Dihydrate LD50 Dermal Rabbit 20000 mg/kg -
LD50 Oral Rat 375 mg/kg -
Section 12. Ecological Information
No known significant effects or critical hazards.
Environmental Effects
Aquatic Ecotoxicity
Not available.
Section 13. Disposal Considerations
Waste Information
Waste must be disposed of in accordance with applicable regulations. Consult your local or regional authorities for additional information.
Waste Stream Classification: -
Origin: -
Section 14. Transport Information
Regulatory information UN number Proper shipping name Classes PG* Label Additional information
TDG Classification 1760 CORROSIVE LIQUID, 8 II Explosive Limit
N.O.S. (Oxalic Acid, and Limited
Dihydrate, Sulfamic Acid) Quantity Index
8
1
Not available. Not available. Not available. - -
IMDG Class
NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to
the Bill of Lading with your shipment. Limited Quantity: Small quantities of controlled goods are not regulated as Dangerous
Goods according to TDG regulations.
PG* : Packing group
Section 15. Regulatory Information
Canada
Class E: Corrosive liquid.
WHMIS (Canada)
This product has been classified according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|