Zep Inc.
Material Safety Data Sheet
1310 Seaboard Industrial Blvd.
Atlanta, GA 30318
1-877-I-BUY-ZEP (428-9937)
and Safe Handling and Disposal Information
www.zep.com
Section 1. Chemical Product and Company Identification
Product name ZEP INDUSTRIAL FALLOUT
REMOVER X-20472
Automotive Fallout Remover
Product use
Product code 0529
Date of issue Supersedes 04/21/90
03/02/05
Emergency For MSDS Information:
Telephone Compliance Services 1-877-I-BUY-ZEP (428-9937)
Numbers
For Medical Emergency
INFOTRAC: (877) 541-2016 Toll Free - All Calls
Recorded
For Transportation Emergency
CHEMTREC: (800) 424-9300 - All Calls Recorded
In the District of Columbia (202) 483-7616
Printing date: 08/01/08
Prepared By
Compliance Services
1420 Seaboard Industrial Blvd.
Atlanta, GA 30318
Section 2. Composition, Information on Ingredients
Name of hazardous ingredients CAS # % by Weight Exposure Limits
NONYLPHENOXY POLY(ETHYLENEOXY) ETHANOL - npe; 9016-45-9 5 - 15 Not established
poly(oxy-1,2-ethanediyl), alpha-(nonylphenyl)-omega-hydroxy
SULFAMIC ACID; amidosulfonic acid 5329-14-6 1 - 10 Not established
OXALIC ACID; ethanedioic acid 6153-56-6 1-5 OSHA PEL / ACGIH TLV (United States).
TWA: 1 mg/m3 8 hour(s).
STEL: 2 mg/m3 15 minute(s).
Section 3. Hazards Identification HMIS
Health 3
Routes of Entry Dermal contact. Eye contact. Inhalation.
Acute Effects
Fire Hazard 0
Hazardous by the following route of exposure: of skin contact (corrosive, irritant). Skin
Skin Reactivity 0
contact may produce burns. Skin inflammation is characterized by itching, scaling,
reddening or, occasionally, blistering.
Hazardous by the following route of exposure: of eye contact (corrosive). Direct contact with
Eyes Personal Protection D
the eyes can cause irreversible damage, including blindness.
Inhalation Hazardous by the following route of exposure: of inhalation (lung corrosive). Avoid
breathing vapors, spray or mists. Over-exposure by inhalation may cause respiratory
irritation. Liquid, spray or mist may produce tissue damage, particularly to mucous
membranes of eyes, mouth and respiratory tract.
Ingestion Harmful if swallowed. May cause burns to mouth, throat and stomach.
NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse health effects are lessened by
following all prescribed safety precautions, including use of proper personal protective equipment.
Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
Carcinogenic Effects
Repeated or prolonged contact with spray or mist may produce chronic eye irritation and severe skin
Chronic Effects
irritation. Repeated or prolonged exposure to spray or mist may produce respiratory tract irritation,
leading to frequent attacks of bronchial infection.
See Toxicological Information (section 11)
Section 4. First Aid Measures
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water
Eye Contact
for at least 15 minutes. Cold water may be used. Get medical attention immediately.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing
Skin Contact
contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get
medical attention immediately.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
Inhalation
oxygen. Get medical attention immediately.
Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
Ingestion
unconscious person. If affected person is conscious, give plenty of water to drink. Get medical attention
immediately.
Page: 1/3
Product code 0529 Product Name Z E P I N D U S T R I A L F A L L O U T
Material Safety Data Sheet
REMOVER X-20472
Section 5. Fire Fighting Measures
Not applicable. Flammable Limits Not applicable. 0
Flash Point
3 0
Non-combustible.
Flammability
Not applicable.
Fire hazard
Fire fighters should wear positive pressure self-contained breathing
Fire-fighting procedures
apparatus (SCBA) and full turnout gear. Do not release runoff from fire to
sewers or waterways.
Section 6. Accidental Release Measures
Put on appropriate personal protective equipment (see section 8). Absorb with an inert material and place in
Spill Clean up
an appropriate waste disposal container. To clean the floor and all objects contaminated by this material, use
[***]. detergent. Finish cleaning by spreading water on the contaminated surface and dispose of according to
local and regional authority requirements.
Section 7. Handling and Storage
Avoid contact with eyes, skin and clothing. Do not ingest. Do not breathe vapor or mist. Use only with adequate
Handling
ventilation. Wash thoroughly after handling.
Keep container tightly closed and dry. Store between the following temperatures: 40掳F - 120掳F (4.4掳C - 49掳C). Keep
Storage
away from food, drink and animal feeding stuffs. Do not contaminate water by cleaning of equipment or disposal of
wastes. Keep out of the reach of children.
Section 8. Exposure Controls, Personal Protection
Personal Protection Protective Clothing (Pictograms)
Splash goggles.
Eyes
Wear appropriate protective clothing to prevent skin contact.
Body
Recommended: Nitrile gloves. Neoprene gloves. Rubber gloves.
Chemical-resistant apron. Chemical resistant boots.
Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective occupational exposure limits. Wear appropriate respirator when
ventilation is inadequate.
Section 9. Physical and Chemical Properties
Physical State Liquid. Clear. Colorless.
Color
Mild.
1.5-2.5 Odor
pH
Not determined.
101.7掳C (215.1掳F) Vapor Pressure
Boiling Point
Not determined.
Specific Gravity 1.02 (Water = 1) Vapor Density
1 compared with Water
Evaporation Rate
Easily soluble in the following materials: cold water,
Solubility
0 (g/l).
hot water. VOC (Consumer)
Section 10. Stability and Reactivity
The product is stable.
Stability and Reactivity
Reactive with oxidizing agents, alkalis.
Incompatibility
Hazardous Polymerization Will not occur.
Hazardous Decomposition Products carbon oxides (CO, CO2) nitrogen oxides (NO, NO2 etc.) sulfur oxides (SO2, SO3 etc.)
Section 11. Toxicological Information
Toxicity to Animals Nonylphenoxypoly(Ethyleneoxy)Ethanol:^[25,45,50,70
ORAL (LD50): Acute: 3310 mg/kg [Rat].
DERMAL (LD50): Acute: 2000 mg/kg [Rabbit].
Sulfamic acid:^[25,45,50,70
ORAL (LD50): Acute: 3160 mg/kg [Rat.].
Oxalic Acid:^[25,45,50,70
ORAL (LD50): Acute: 375 mg/kg [Rat.].
Section 12. Ecological Information
Not available.
Ecotoxicity
Biodegradable/OECD Not available.
Section 13. Disposal Considerations
Waste must be disposed of in accordance with federal, Waste Stream Code: D002
Waste
Classification: - (Hazardous waste.)
state and local environmental control regulations.
Information
Origin: - (RCRA waste.)
Consult your local or regional authorities.
Page: 2/3
Product code 0529 Product Name Z E P I N D U S T R I A L F A L L O U T
Material Safety Data Sheet
REMOVER X-20472
Section 14. Transport Information
Proper shipping name Corrosive liquid, acidic, organic, n.o.s. (Sulfamic Acid and Oxalic Acid)
DOT Class 8: Corrosive liquid. UN number 3265
DOT Classification
NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to
the Bill of Lading with your shipment.
8
TDG Classification
Section 15. Regulatory Information
SARA 313 toxic chemical notification and release reporting:
U.S. Federal Regulations
No products were found.
Clean Water Act (CWA) 311: No products were found.
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.
All Components of this product are listed or exempt from listing on TSCA inventory.
California Prop. 65: No products were found.
State Regulations
Class D-1B: Material causing immediate and serious toxic effects (Toxic).
WHMIS (Canada)
Class E: Corrosive liquid.
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|