Search   
MSDS 
:
 Methyl Methacrylate-D8, 99.5 Atom % D, Stabilized with 100 ppm
CAS 
:
 0-00-1
SYNONYMS 
:
 Methyl Methacrylate Monomer; Methacrylic Acid Methyl Ester;     alpha-Methacrylic Acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |Methyl Methacrylate-D8 | 99.5 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38 43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and skin.
May cause sensitization by skin contact.Hygroscopic (absorbs moisture
from the air).Corrosive.Light sensitive.Air sensitive.Heat sensitive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. May cause eye injury. Lachrymator (substance which increases
the flow of tears).
Skin:
May cause severe skin irritation. May cause skin sensitization, an
allergic reaction, which becomes evident upon re-exposure to this
material.
Ingestion:
May cause central nervous system depression, kidney damage, and
liver damage. May cause gastrointestinal irritation with nausea,
vomiting and diarrhea. May cause allergic reaction.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. May cause allergic respiratory reaction. May cause
respiratory tract irritation. May cause effects similar to those
described for ingestion.
Chronic:
Prolonged or repeated skin contact may cause sensitization
dermatitis and possible destruction and/or ulceration. May cause
reproductive and fetal effects. Repeated exposure may cause tingling
in the extremities and other nervous system abnormalities.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Flammable Liquid. Can release vapors that form explosive
mixtures at temperatures above the flashpoint. Use water spray to
keep fire-exposed containers cool. Vapor may cause flash fire. Water
may be ineffective. Material is lighter than water and a fire may be
spread by the use of water. May form explosive peroxides. Vapors may
be heavier than air. They can spread along the ground and collect in
low or confined areas. May polymerize explosively when involved in a
fire. Containers may explode when heated.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Water may be ineffective. For large fires,
use water spray, fog or alcohol-resistant foam. Do NOT use straight
streams of water. Cool containers with flooding quantities of water
until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Scoop up
with a nonsparking tool, then place into a suitable container for
disposal. Remove all sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Avoid contact with skin and
eyes. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Avoid
ingestion and inhalation. If peroxide formation is suspected, do not
open or move container. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep from contact with
oxidizing materials. Store in a cool, dry, well-ventilated area away
from incompatible substances. Refrigerator/flammables. After
opening, purge container with nitrogen before reclosing.
Periodically test for peroxide formation on long-term storage.
Addition of water or appropriate reducing materials will lessen
peroxide formation.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 0-00-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: sweetish odor - sharp odor
pH: Not available.
Vapor Pressure: 28 mm Hg @ 20 deg C
Viscosity: Not available.
Boiling Point: 212 deg F
Freezing/Melting Point: -54.4 deg F
Autoignition Temperature: 790 deg F ( 421.11 deg C)
Flash Point: 50 deg F ( 10.00 deg C)
Explosion Limits, lower: 1.7
Explosion Limits, upper: 8.2
Decomposition Temperature: Not available.
Solubility in water: Slightly soluble in water.
Specific Gravity/Density: 0.94 (water=1)
Molecular Formula: C5D8O2
Molecular Weight: 108.1108

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable. However, may decompose if heated. On long term storage,
substances with similar functional groups form explosive peroxides.
Conditions to Avoid:
High temperatures, incompatible materials, light, ignition sources,
exposure to air.
Incompatibilities with Other Materials:
Substance is incompatible with polymerization catalysts (peroxides,
persulfates), nitric acid, strong oxidizers, amines, halogens, bases,
light, heat.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-00-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl Methacrylate-D8 -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: METHYL METHACRYLATE MONOMER, INHIBITED
Hazard Class: 3
UN Number: 1247
Packing Group: II
IMO
Shipping Name: METHYL METHACRYLATE MONOMER, INHIBITED
Hazard Class: 3.2
UN Number: 1247
Packing Group: II
RID/ADR
Shipping Name: METHYLMETHACRYLATE MONOMER, INHIBITED
Hazard Class: 3
UN Number: 1247
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 0-00-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-00-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/05/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Cumene-d12, 99 atom % D 0-00-1
Methyl Methacrylate-D8, 99.5 Atom % D, Stabilized with 100 ppm 0-00-1
Methylcyclohexane-d14, 99.5 atom % D 108-87-2
Ethylene Glycol-D6, 99 Atom % D 15054-86-1
Ethyl alcohol-d6, anhydrous, 99 Atom % D 64-17-5
Methyl-d3 alcohol, 99.5 atom % D 67-56-1
(S,S)-(+)-2,2-Dimethyl-5-Methylamino-4-Phenyl-1,3-Dioxane 0-00-1
2,2-Dimethyl-1,3-Dioxan-5-One 74181-34-3
1,2,2,6,6-Pentamethyl-4-Piperidinol 2403-89-6
2,2'-Dithio(bis)benzothiazole 120-78-5
Acridine Orange, ca. 55% 10127-02-3
Cyclopentadienylmolybdenum Tricarbonyl Sodium 12107-35-6
Tetrabenzylzirconium 24356-01-2
2-Methylcyclohexanol, P.A.; Mixture of Cis and Trans 583-59-5
1,2-Bis(dicyclohexylphosphino)ethane nickel(II) chloride 96555-88-3
1-Octene, 99+% 111-66-0
Lauric Acid, 99.8+% (GC) 143-07-7
Ethylenediaminetetraacetic Acid, Tripotassium Salt Dihydrate (Pract), 7732-18-5
alpha-Terpineol, 99% 98-55-5
Calcium bromide hydrate 7789-41-5
3-Hydroxy-N-Methylpiperidine, 97% 3554-74-3
2-Hydroxymethyl-12-Crown-4, Tech., 93% (gGC) 75507-26-5
Methyl(2E,4S)-(-)-4-(phenylmethoxy)pent-2-enoate 112489-57-3
Ethyl Isocyanoacetate, 97% (GC) 2999-46-4
N-Iodosuccinimide 516-12-1
3,5-Dichlorobenzotrifluoride 0-00-1
DL-Methionine, Feed Grade 59-51-8
2-Vinyl-1,3-dioxolane 3984-22-3
N-Glycine, E.P. Pyrogene Free 56-40-6
D(-)-glutamine 5959-95-5
4,5-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt 5808-22-0
Albumine Bovine, Fraction V (pH:7.0) 94349-60-7
n-Methyl-2,2,6,6-tetramethyl-4-piperidinol 99% 50-01-4
Ethyl cis-2-amino-1-cyclopentane carboxylate hydrochloride, 99% 142547-15-7
cis-2-(Benzyloxycarbonylamino)-1- cyclopentanecarboxylic acid
3',4'-(Didodecyloxy)benzaldehyde, 99% (GC) 117241-25-5
2-Amino-1,2,3,4-Tetrahydronaphthalene-2- Carboxylic Acid 0-00-0
2,2',4'-Trichloroacetophenone, 99% (gc) 4252-78-2
3-Aminophenol, 99% 591-27-5
Alpha-Naphtholbenzein 6948-88-5
cis-2-Aminomethylcycloheptanol hydrochloride 0-00-0
n-(Tributyl)tinpyrrole 50486-65-2
2-Benzoyl-1-cyano-6,7-dimethoxy-1,2,3,4- tetrahydroisoquinoline
Aluminum, Powder, -120 Mesh, 99,99% 7429-90-5
3-Amino-4-methylpentanoic acid 2458-12-0
3-Hydroxy-2,2-dimethyl-3-phenylpropionic- acid 0-00-0
(4S,2RS)-2,5,5-Trimethylthiazolidine-4- Carboxylic Acid 0-00-0
Bromobenzene-d5 108-86-1
3-Amino-1-phenoxy-2-propanol hydrochloride, 98% 4287-20-1
Tetrathiafulvalene, 99+% 31366-25-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net