**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7429-90-5 |Aluminum | 99.99 | 231-072-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 15 17
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Contact with water liberates extremely flammable gases.
Spontaneously flammable in air.Air sensitive.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
No sensitizing effects known.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation. May cause respiratory
difficulty and coughing.
Chronic:
Aluminum may be implicated in Alzheimer's disease. Inhalation of
aluminum containing dusts may cause pulmonary disease.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water Reactive. Material will react with water and
may release a flammable and/or toxic gas. Dust can be an explosion
hazard when exposed to heat or flame. May ignite or explode on
contact with steam or moist air. Aluminum powder may evolve hydrogen
gas in contact with water and finely divided dust may be ignited by
naked lights or sparks. Polished aluminum powders which have been
treated with oils or wax for printing or paint purposes are not
generally dangerous. Bulk dust when damp with water may heat
spontaneously. Hazard greater as fineness increases.
Extinguishing Media:
DO NOT USE WATER! Do NOT get water inside containers. Contact
professional fire-fighters immediately. Do NOT use CO2 or
halogenated extinguishing agents. Smother with dry sand, dry clay,
dry ground limestone (CaCO3), or use approved Class D extinguishers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Avoid generating dusty conditions. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not expose spill to water. Vacuum or sweep up material and place into
a suitable, dry disposal container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not allow water to get into the container
because of violent reaction. Minimize dust generation and
accumulation. Avoid contact with skin and eyes. Avoid ingestion and
inhalation. Do not allow contact with water. Keep from contact with
moist air and steam. Use only with adequate ventilation.
Storage:
Keep away from sources of ignition. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep away
from water. Flammables-area. Keep containers tightly closed. Keep
away from acidic, alkaline, combustible and oxidizing materials.
Separate from halogenated compounds.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower. Use adequate general or local exhaust
ventilation to keep airborne concentrations below the permissible
exposure limits.
Exposure Limits
CAS# 7429-90-5:
United Kingdom, WEL - TWA: 10 mg/m3 TWA (inhalable dust); 4 mg/m3
(respirable dust)
United Kingdom, WEL - STEL: 30 mg/m3 STEL (inhalable dust); 12 mg
STEL (respirable dust)
United States OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Belgium - TWA: 10 mg/m3 VLE (metal); 5 mg/m3 VLE (fume)
France - VME: 10 mg/m3 VME (metal); 5 mg/m3 VME (dust)
Japan: 0.5 mg/m3 OEL (respirable dust); 2 mg/m3 OEL (total dust)
Malaysia: 10 mg/m3 TWA (metal dust)
Netherlands: 10 mg/m3 MAC
Russia: 2 mg/m3 TWA
Spain: 10 mg/m3 VLA-ED (dust)
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: silver
Odor: odorless
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: 2327 deg C @ 760mm Hg
Freezing/Melting Point: 660 deg C
Autoignition Temperature: 760 deg C ( 1,400.00 deg F)
Flash Point: Not applicable.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: > 2400 deg C
Solubility in water: insoluble
Specific Gravity/Density: 2.7020g/cm3
Molecular Formula: Al
Molecular Weight: 26.98
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Aluminum powder may
evolve hydrogen gas in contact with water, and finely divided dust
may be ignited by naked lights or sparks. Polished aluminum powders
which have been treated with oils or wax for printing or paint
purposes are not generally dangerous. Uncoated aluminum powder
reacts with strong acid and strong alkalies to release hydrogen gas.
Conditions to Avoid:
Ignition sources, dust generation, exposure to air, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Acids, alkalies, acid chlorides, halogenated agents, metal salts,
strong oxidizing agents, Contact with water liberates highly
flammable gases., ammonium nitrate, ammonium persulfate, antimony,
arsenic oxides, barium bromate, barium chlorate, barium iodate.
Hazardous Decomposition Products:
Hydrogen gas, aluminum oxide, aluminum fumes.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7429-90-5: BD0330000 BD1020000
LD50/LC50:
Not available.
Carcinogenicity:
Aluminum -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: ALUMINIUM POWDER, UNCOATED
Hazard Class: 4.3
UN Number: 1396
Packing Group: II
IMO
Shipping Name: ALUMINIUM POWDER, UNCOATED
Hazard Class: 4.3
UN Number: 1396
Packing Group: II
RID/ADR
Shipping Name: ALUMINIUM POWDER, UNCOATED
Hazard Class: 4.3
UN Number: 1396
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 15 Contact with water liberates extremely
flammable gases.
R 17 Spontaneously flammable in air.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 43A In case of fire, use dry chemical (never use
water).
WGK (Water Danger/Protection)
CAS# 7429-90-5: 0
Canada
CAS# 7429-90-5 is listed on Canada's DSL List.
CAS# 7429-90-5 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7429-90-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 6/01/1998 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Cumene-d12, 99 atom % D
| 0-00-1 |
|
Methyl Methacrylate-D8, 99.5 Atom % D, Stabilized with 100 ppm
| 0-00-1 |
|
Methylcyclohexane-d14, 99.5 atom % D
| 108-87-2 |
|
Ethylene Glycol-D6, 99 Atom % D
| 15054-86-1 |
|
Ethyl alcohol-d6, anhydrous, 99 Atom % D
| 64-17-5 |
|
Methyl-d3 alcohol, 99.5 atom % D
| 67-56-1 |
|
(S,S)-(+)-2,2-Dimethyl-5-Methylamino-4-Phenyl-1,3-Dioxane
| 0-00-1 |
|
2,2-Dimethyl-1,3-Dioxan-5-One
| 74181-34-3 |
|
1,2,2,6,6-Pentamethyl-4-Piperidinol
| 2403-89-6 |
|
2,2'-Dithio(bis)benzothiazole
| 120-78-5 |
|
Acridine Orange, ca. 55%
| 10127-02-3 |
|
Cyclopentadienylmolybdenum Tricarbonyl Sodium
| 12107-35-6 |
|
Tetrabenzylzirconium
| 24356-01-2 |
|
2-Methylcyclohexanol, P.A.; Mixture of Cis and Trans
| 583-59-5 |
|
1,2-Bis(dicyclohexylphosphino)ethane nickel(II) chloride
| 96555-88-3 |
|
1-Octene, 99+%
| 111-66-0 |
|
Lauric Acid, 99.8+% (GC)
| 143-07-7 |
|
Ethylenediaminetetraacetic Acid, Tripotassium Salt Dihydrate (Pract),
| 7732-18-5 |
|
alpha-Terpineol, 99%
| 98-55-5 |
|
Calcium bromide hydrate
| 7789-41-5 |
|
3-Hydroxy-N-Methylpiperidine, 97%
| 3554-74-3 |
|
2-Hydroxymethyl-12-Crown-4, Tech., 93% (gGC)
| 75507-26-5 |
|
Methyl(2E,4S)-(-)-4-(phenylmethoxy)pent-2-enoate
| 112489-57-3 |
|
Ethyl Isocyanoacetate, 97% (GC)
| 2999-46-4 |
|
N-Iodosuccinimide
| 516-12-1 |
|
3,5-Dichlorobenzotrifluoride
| 0-00-1 |
|
DL-Methionine, Feed Grade
| 59-51-8 |
|
2-Vinyl-1,3-dioxolane
| 3984-22-3 |
|
N-Glycine, E.P. Pyrogene Free
| 56-40-6 |
|
D(-)-glutamine
| 5959-95-5 |
|
4,5-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt
| 5808-22-0 |
|
Albumine Bovine, Fraction V (pH:7.0)
| 94349-60-7 |
|
n-Methyl-2,2,6,6-tetramethyl-4-piperidinol 99%
| 50-01-4 |
|
Ethyl cis-2-amino-1-cyclopentane carboxylate hydrochloride, 99%
| 142547-15-7 |
|
cis-2-(Benzyloxycarbonylamino)-1- cyclopentanecarboxylic acid
| |
|
3',4'-(Didodecyloxy)benzaldehyde, 99% (GC)
| 117241-25-5 |
|
2-Amino-1,2,3,4-Tetrahydronaphthalene-2- Carboxylic Acid
| 0-00-0 |
|
2,2',4'-Trichloroacetophenone, 99% (gc)
| 4252-78-2 |
|
3-Aminophenol, 99%
| 591-27-5 |
|
Alpha-Naphtholbenzein
| 6948-88-5 |
|
cis-2-Aminomethylcycloheptanol hydrochloride
| 0-00-0 |
|
n-(Tributyl)tinpyrrole
| 50486-65-2 |
|
2-Benzoyl-1-cyano-6,7-dimethoxy-1,2,3,4- tetrahydroisoquinoline
| |
|
Aluminum, Powder, -120 Mesh, 99,99%
| 7429-90-5 |
|
3-Amino-4-methylpentanoic acid
| 2458-12-0 |
|
3-Hydroxy-2,2-dimethyl-3-phenylpropionic- acid
| 0-00-0 |
|
(4S,2RS)-2,5,5-Trimethylthiazolidine-4- Carboxylic Acid
| 0-00-0 |
|
Bromobenzene-d5
| 108-86-1 |
|
3-Amino-1-phenoxy-2-propanol hydrochloride, 98%
| 4287-20-1 |
|
Tetrathiafulvalene, 99+%
| 31366-25-3 |
|
|