Search   
MSDS 
:
 6-Thio-2-hydroxypurine, 98%
CAS 
:
 0-01-1
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |6-Thio-2-Hydroxypurine | 98% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Non-irritating to the eyes.
Skin:
Non-irritating to the skin.
Ingestion:
May cause irritation of the digestive tract. No information found.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. No information available.
The toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-01-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: light brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble in water
Specific Gravity/Density:
Molecular Formula: C5H5N4OS
Molecular Weight: 169.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-01-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
6-Thio-2-Hydroxypurine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 0-01-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-01-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 5/05/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,2,2-Trichloro-1-ethoxyethanol 515-83-3
1,8-Nonadiyne, 98% 2396-65-8
Silver benzoate, 99% 532-31-0
1,8-Dichlorooctane, 98% 2162-99-4
Isoamylbutyrate 99+ % 106-27-4
Cis-4-Heptenal, 96+% 6728-31-0
Lithium tetrafluoroborate, anhydrous, 98% 14283-07-9
2'-Hydroxy-5'-methylacetophenone, 98% 1450-72-2
Aza-18-Crown-6, 98% 33941-15-0
Diphenylamine Sulfate, 98% (UV-Vis) 587-84-8
Indole-5-Carboxylic Acid, 98% 1670-81-1
Phenylmercuric Acetate, 98.0-100.5% (Titr) 62-38-4
Strontium Atomic Absorption Standard Solution, 1 mg/ml Sr in 2% HCl 1633-05-2
(6s,2z)-6,7-isopropylidenedioxy-3,7-dimeth yl-2-octen-1-ol, 97% 61262-96-2
Imidurea, 26-28% nitrogen 39236-46-9
bis(Cyclopentadienyl)titanium dichloride, 97% 1271-19-8
P-Tert.-Butylbenzyl Alcohol, 98% 877-65-6
Tungsten atomic absorption standard solution, 1 mg/ml W in 5% HF 7440-33-7
2-Chloroacrylonitrile, 99%, stabilized with ca 500 ppm hydroquinone 123-31-9
1,2-Diaminopropane-N,N,N',N'-Tetraacetic Acid, 98+% 4408-81-5
4-Chloro-2-Methylanisole, 99% 3260-85-3
1-Bromo-4-chlorobutane, 99% (gc) 6940-78-9
Diethyl Sulfite, 98% 623-81-4
3-Bromochlorobenzene, 99% 108-37-2
3-Methyl-2-Phenylpyridine, 97+% 10273-90-2
2-(4-Biphenylyl)-6-phenylbenzoxazole, scintillation grade 17064-47-0
Piperidineacetonitrile 3010-03-5
3,5-Dinitrobenzoyl Chloride 99-33-2
3-Quinolinecarboxylic acid, 98% 6480-68-8
4-Sulfophthalic Acid (Pract) (50% in Water) 89-08-7
Triethyl orthoformate, 99+% (gc) 122-51-0
Tri-O-Tolylphosphine 6163-58-2
4-Bromophenylboric acid/anhydride 5467-74-3
Cis-3,3,5-Trimethylcyclohexanol, 98+% Cis 933-48-2
3-Phenylpropyl isobutyrate, 98+% 103-58-2
6-Thio-2-hydroxypurine, 98% 0-01-1
4-(Diethylaminomethyl)-2,5-dimethylphenol, 98% 69286-57-3
2-Fluorophenyl isocyanate 16744-98-2
4-Chloro-2-Phenylquinazoline 97% 6484-25-9
Tristearin 555-43-1
Rhodamine 116 Perchlorate, Laser Grade 62669-77-6
d-(-)-Norvaline, 99% 2013-12-9
Cobalt Tetramethoxyphenylporphyrin, 94% (Titr.) 28903-71-1
Biurea, 99% (EX N) 110-21-4
3-Methyl-2-nitrobenzoic acid, 98% 5437-38-7
2-Chloro-1,4-dimethoxybenzene, 99+% 2100-42-7
4-Bromo-2-fluorobenzaldehyde, 96%
Cyanuric acid, 98% 108-80-5
LITHIUM TETRAPHENYLBORATE 14485-20-2
4-Quinolinecarboxaldehyde, 95% 4363-93-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net