Search   
MSDS 
:
 Strontium Atomic Absorption Standard Solution, 1 mg/ml Sr in 2% HCl
CAS 
:
 1633-05-2
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 1633-05-2 |Strontium carbonate | <1.0 | 216-643-7 |
|----------------|--------------------------------------|----------|-----------|
| 7647-01-0 |Hydrogen chloride | 2.0 | 231-595-7 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use
extinguishing media appropriate to the surrounding fire. Substance is
noncombustible. Vapors may be heavier than air. They can spread
along the ground and collect in low or confined areas.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Do not breathe dust, vapor,
mist, or gas. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1633-05-2:

Russia: 6 mg/m3 TWA
CAS# 7647-01-0:
United Kingdom, WEL - TWA: 1 ppm TWA (aerosol mist and gas); 2 mg
TWA (aerosol mist and gas)
United Kingdom, WEL - STEL: 5 ppm STEL (aerosol mist and gas); 8
mg/m3 STEL (aerosol mist and gas)
United States OSHA: ; 5 ppm Ceiling; 7 mg/m3 Ceiling
Belgium - TWA: 5 ppm VLE; 8 mg/m3 VLE
Belgium - STEL: 10 ppm VLE; 15 mg/m3 VLE
France - VLE: 5 ppm VLE; 7.5 mg/m3 VLE
Germany: 8 mg/m3 TWA
Japan: 5 ppm Ceiling; 7.5 mg/m3 Ceiling
Malaysia: 5 ppm Ceiling; 7.5 mg/m3 Ceiling
Netherlands: 10 ppm STEL; 15 mg/m3 STEL
Netherlands: 5 ppm MAC; 8 mg/m3 MAC
Russia: 5 mg/m3 TWA
Spain: 5 ppm VLA-ED; 7.6 mg/m3 VLA-ED
Spain: 10 ppm VLA-EC; 15 mg/m3 VLA-EC
CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: None reported.
pH: <1.0
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible
Specific Gravity/Density:
Molecular Formula: Solution
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1633-05-2: WK8305000
CAS# 7647-01-0: MW4025000 MW4031000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 7647-01-0: Inhalation, mouse: LC50 = 1108 ppm/1H; Inhalation,
mouse: LC50 = 20487 mg/m3/5M; Inhalation, mouse: LC50 = 3940
mg/m3/30M; Inhalation, mouse: LC50 = 8300 mg/m3/30M; Inhalation,
rat: LC50 = 3124 ppm/1H; Inhalation, rat: LC50 = 60938 mg/m3/5M;
Inhalation, rat: LC50 = 7004 mg/m3/30M; Inhalation, rat: LC50 =
45000 mg/m3/5M; Inhalation, rat: LC50 = 8300 mg/m3/30M; Oral,
rabbit: LD50 = 900 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Strontium carbonate -
Not listed by ACGIH, IARC, or NTP.
Hydrogen chloride -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: HYDROCHLORIC ACID
Hazard Class: 8
UN Number: 1789
Packing Group: II
IMO
Shipping Name: HYDROCHLORIC ACID
Hazard Class: 8
UN Number: 1789
Packing Group: II
RID/ADR
Shipping Name: HYDROCHLORIC ACID
Hazard Class: 8
UN Number: 1789
Packing group: II
USA RQ: CAS# 7647-01-0: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1633-05-2: 0
CAS# 7647-01-0: 1
CAS# 7732-18-5: No information available.
Canada
CAS# 1633-05-2 is listed on Canada's DSL List.
CAS# 7647-01-0 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 1633-05-2 is not listed on Canada's Ingredient Disclosure List.
CAS# 7647-01-0 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1633-05-2 is listed on the TSCA inventory.
CAS# 7647-01-0 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 36/37/38 Irritating to eyes, respiratory system and
skin.
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,2,2-Trichloro-1-ethoxyethanol 515-83-3
1,8-Nonadiyne, 98% 2396-65-8
Silver benzoate, 99% 532-31-0
1,8-Dichlorooctane, 98% 2162-99-4
Isoamylbutyrate 99+ % 106-27-4
Cis-4-Heptenal, 96+% 6728-31-0
Lithium tetrafluoroborate, anhydrous, 98% 14283-07-9
2'-Hydroxy-5'-methylacetophenone, 98% 1450-72-2
Aza-18-Crown-6, 98% 33941-15-0
Diphenylamine Sulfate, 98% (UV-Vis) 587-84-8
Indole-5-Carboxylic Acid, 98% 1670-81-1
Phenylmercuric Acetate, 98.0-100.5% (Titr) 62-38-4
Strontium Atomic Absorption Standard Solution, 1 mg/ml Sr in 2% HCl 1633-05-2
(6s,2z)-6,7-isopropylidenedioxy-3,7-dimeth yl-2-octen-1-ol, 97% 61262-96-2
Imidurea, 26-28% nitrogen 39236-46-9
bis(Cyclopentadienyl)titanium dichloride, 97% 1271-19-8
P-Tert.-Butylbenzyl Alcohol, 98% 877-65-6
Tungsten atomic absorption standard solution, 1 mg/ml W in 5% HF 7440-33-7
2-Chloroacrylonitrile, 99%, stabilized with ca 500 ppm hydroquinone 123-31-9
1,2-Diaminopropane-N,N,N',N'-Tetraacetic Acid, 98+% 4408-81-5
4-Chloro-2-Methylanisole, 99% 3260-85-3
1-Bromo-4-chlorobutane, 99% (gc) 6940-78-9
Diethyl Sulfite, 98% 623-81-4
3-Bromochlorobenzene, 99% 108-37-2
3-Methyl-2-Phenylpyridine, 97+% 10273-90-2
2-(4-Biphenylyl)-6-phenylbenzoxazole, scintillation grade 17064-47-0
Piperidineacetonitrile 3010-03-5
3,5-Dinitrobenzoyl Chloride 99-33-2
3-Quinolinecarboxylic acid, 98% 6480-68-8
4-Sulfophthalic Acid (Pract) (50% in Water) 89-08-7
Triethyl orthoformate, 99+% (gc) 122-51-0
Tri-O-Tolylphosphine 6163-58-2
4-Bromophenylboric acid/anhydride 5467-74-3
Cis-3,3,5-Trimethylcyclohexanol, 98+% Cis 933-48-2
3-Phenylpropyl isobutyrate, 98+% 103-58-2
6-Thio-2-hydroxypurine, 98% 0-01-1
4-(Diethylaminomethyl)-2,5-dimethylphenol, 98% 69286-57-3
2-Fluorophenyl isocyanate 16744-98-2
4-Chloro-2-Phenylquinazoline 97% 6484-25-9
Tristearin 555-43-1
Rhodamine 116 Perchlorate, Laser Grade 62669-77-6
d-(-)-Norvaline, 99% 2013-12-9
Cobalt Tetramethoxyphenylporphyrin, 94% (Titr.) 28903-71-1
Biurea, 99% (EX N) 110-21-4
3-Methyl-2-nitrobenzoic acid, 98% 5437-38-7
2-Chloro-1,4-dimethoxybenzene, 99+% 2100-42-7
4-Bromo-2-fluorobenzaldehyde, 96%
Cyanuric acid, 98% 108-80-5
LITHIUM TETRAPHENYLBORATE 14485-20-2
4-Quinolinecarboxaldehyde, 95% 4363-93-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net