Search   
MSDS 
:
 Lithium tetrafluoroborate, anhydrous, 98%
CAS 
:
 14283-07-9
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14283-07-9 |Lithium tetrafluoroborate, anhydrous, | 98% | 238-178-9 |
| |98% | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 20/21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed. Causes
burns.Corrosive.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
May cause severe irritation and possible burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. May cause abdominal pain, nausea, vomiting, and
inflammation of the gums and mouth.
Chronic:
Overexposure may cause delayed kidney injury. Chronic ingestion may
cause liver damage. May cause anemia and other blood cell
abnormalities. May cause digestive tract and cardiac disturbances.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use and store under nitrogen. Use only in a
chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 14283-07-9:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: not available
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 275 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: .8520g/cm3
Molecular Formula: BF4Li
Molecular Weight: 93.75

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Exposure to moist air or water.
Incompatibilities with Other Materials:
Strong acids
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14283-07-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Lithium tetrafluoroborate, anhydrous, 98% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, CORROSIVE, INORGANIC, N.O.S.*
Hazard Class: 6.1 (8)
UN Number: 3290
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, CORROSIVE, INORGANIC, N.O.S.
Hazard Class: 6.1 (8)
UN Number: 3290
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, CORROSIVE, INORGANIC, N.O.S.
Hazard Class: 6.1 (8)
UN Number: 3290
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 14283-07-9: No information available.
Canada
CAS# 14283-07-9 is listed on Canada's NDSL List.
CAS# 14283-07-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14283-07-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,2,2-Trichloro-1-ethoxyethanol 515-83-3
1,8-Nonadiyne, 98% 2396-65-8
Silver benzoate, 99% 532-31-0
1,8-Dichlorooctane, 98% 2162-99-4
Isoamylbutyrate 99+ % 106-27-4
Cis-4-Heptenal, 96+% 6728-31-0
Lithium tetrafluoroborate, anhydrous, 98% 14283-07-9
2'-Hydroxy-5'-methylacetophenone, 98% 1450-72-2
Aza-18-Crown-6, 98% 33941-15-0
Diphenylamine Sulfate, 98% (UV-Vis) 587-84-8
Indole-5-Carboxylic Acid, 98% 1670-81-1
Phenylmercuric Acetate, 98.0-100.5% (Titr) 62-38-4
Strontium Atomic Absorption Standard Solution, 1 mg/ml Sr in 2% HCl 1633-05-2
(6s,2z)-6,7-isopropylidenedioxy-3,7-dimeth yl-2-octen-1-ol, 97% 61262-96-2
Imidurea, 26-28% nitrogen 39236-46-9
bis(Cyclopentadienyl)titanium dichloride, 97% 1271-19-8
P-Tert.-Butylbenzyl Alcohol, 98% 877-65-6
Tungsten atomic absorption standard solution, 1 mg/ml W in 5% HF 7440-33-7
2-Chloroacrylonitrile, 99%, stabilized with ca 500 ppm hydroquinone 123-31-9
1,2-Diaminopropane-N,N,N',N'-Tetraacetic Acid, 98+% 4408-81-5
4-Chloro-2-Methylanisole, 99% 3260-85-3
1-Bromo-4-chlorobutane, 99% (gc) 6940-78-9
Diethyl Sulfite, 98% 623-81-4
3-Bromochlorobenzene, 99% 108-37-2
3-Methyl-2-Phenylpyridine, 97+% 10273-90-2
2-(4-Biphenylyl)-6-phenylbenzoxazole, scintillation grade 17064-47-0
Piperidineacetonitrile 3010-03-5
3,5-Dinitrobenzoyl Chloride 99-33-2
3-Quinolinecarboxylic acid, 98% 6480-68-8
4-Sulfophthalic Acid (Pract) (50% in Water) 89-08-7
Triethyl orthoformate, 99+% (gc) 122-51-0
Tri-O-Tolylphosphine 6163-58-2
4-Bromophenylboric acid/anhydride 5467-74-3
Cis-3,3,5-Trimethylcyclohexanol, 98+% Cis 933-48-2
3-Phenylpropyl isobutyrate, 98+% 103-58-2
6-Thio-2-hydroxypurine, 98% 0-01-1
4-(Diethylaminomethyl)-2,5-dimethylphenol, 98% 69286-57-3
2-Fluorophenyl isocyanate 16744-98-2
4-Chloro-2-Phenylquinazoline 97% 6484-25-9
Tristearin 555-43-1
Rhodamine 116 Perchlorate, Laser Grade 62669-77-6
d-(-)-Norvaline, 99% 2013-12-9
Cobalt Tetramethoxyphenylporphyrin, 94% (Titr.) 28903-71-1
Biurea, 99% (EX N) 110-21-4
3-Methyl-2-nitrobenzoic acid, 98% 5437-38-7
2-Chloro-1,4-dimethoxybenzene, 99+% 2100-42-7
4-Bromo-2-fluorobenzaldehyde, 96%
Cyanuric acid, 98% 108-80-5
LITHIUM TETRAPHENYLBORATE 14485-20-2
4-Quinolinecarboxaldehyde, 95% 4363-93-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net