**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3010-03-5 |Piperidineacetonitrile | 100.0 | 221-131-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3010-03-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: Not available.
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 204-208C
Freezing/Melting Point: 18-19C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H12N2
Molecular Weight: 124.0974
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 3010-03-5: AM1925000
LD50/LC50:
Not available.
Carcinogenicity:
Piperidineacetonitrile -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: NITRILES, LIQUID, TOXIC, N.O.S.*
Hazard Class: 6.1
UN Number: 3276
Packing Group: III
IMO
Shipping Name: NITRILES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing Group: III
RID/ADR
Shipping Name: NITRILES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37 Wear suitable protective clothing and
gloves.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 3010-03-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 3010-03-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3010-03-5 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/09/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2,2,2-Trichloro-1-ethoxyethanol
| 515-83-3 |
|
1,8-Nonadiyne, 98%
| 2396-65-8 |
|
Silver benzoate, 99%
| 532-31-0 |
|
1,8-Dichlorooctane, 98%
| 2162-99-4 |
|
Isoamylbutyrate 99+ %
| 106-27-4 |
|
Cis-4-Heptenal, 96+%
| 6728-31-0 |
|
Lithium tetrafluoroborate, anhydrous, 98%
| 14283-07-9 |
|
2'-Hydroxy-5'-methylacetophenone, 98%
| 1450-72-2 |
|
Aza-18-Crown-6, 98%
| 33941-15-0 |
|
Diphenylamine Sulfate, 98% (UV-Vis)
| 587-84-8 |
|
Indole-5-Carboxylic Acid, 98%
| 1670-81-1 |
|
Phenylmercuric Acetate, 98.0-100.5% (Titr)
| 62-38-4 |
|
Strontium Atomic Absorption Standard Solution, 1 mg/ml Sr in 2% HCl
| 1633-05-2 |
|
(6s,2z)-6,7-isopropylidenedioxy-3,7-dimeth yl-2-octen-1-ol, 97%
| 61262-96-2 |
|
Imidurea, 26-28% nitrogen
| 39236-46-9 |
|
bis(Cyclopentadienyl)titanium dichloride, 97%
| 1271-19-8 |
|
P-Tert.-Butylbenzyl Alcohol, 98%
| 877-65-6 |
|
Tungsten atomic absorption standard solution, 1 mg/ml W in 5% HF
| 7440-33-7 |
|
2-Chloroacrylonitrile, 99%, stabilized with ca 500 ppm hydroquinone
| 123-31-9 |
|
1,2-Diaminopropane-N,N,N',N'-Tetraacetic Acid, 98+%
| 4408-81-5 |
|
4-Chloro-2-Methylanisole, 99%
| 3260-85-3 |
|
1-Bromo-4-chlorobutane, 99% (gc)
| 6940-78-9 |
|
Diethyl Sulfite, 98%
| 623-81-4 |
|
3-Bromochlorobenzene, 99%
| 108-37-2 |
|
3-Methyl-2-Phenylpyridine, 97+%
| 10273-90-2 |
|
2-(4-Biphenylyl)-6-phenylbenzoxazole, scintillation grade
| 17064-47-0 |
|
Piperidineacetonitrile
| 3010-03-5 |
|
3,5-Dinitrobenzoyl Chloride
| 99-33-2 |
|
3-Quinolinecarboxylic acid, 98%
| 6480-68-8 |
|
4-Sulfophthalic Acid (Pract) (50% in Water)
| 89-08-7 |
|
Triethyl orthoformate, 99+% (gc)
| 122-51-0 |
|
Tri-O-Tolylphosphine
| 6163-58-2 |
|
4-Bromophenylboric acid/anhydride
| 5467-74-3 |
|
Cis-3,3,5-Trimethylcyclohexanol, 98+% Cis
| 933-48-2 |
|
3-Phenylpropyl isobutyrate, 98+%
| 103-58-2 |
|
6-Thio-2-hydroxypurine, 98%
| 0-01-1 |
|
4-(Diethylaminomethyl)-2,5-dimethylphenol, 98%
| 69286-57-3 |
|
2-Fluorophenyl isocyanate
| 16744-98-2 |
|
4-Chloro-2-Phenylquinazoline 97%
| 6484-25-9 |
|
Tristearin
| 555-43-1 |
|
Rhodamine 116 Perchlorate, Laser Grade
| 62669-77-6 |
|
d-(-)-Norvaline, 99%
| 2013-12-9 |
|
Cobalt Tetramethoxyphenylporphyrin, 94% (Titr.)
| 28903-71-1 |
|
Biurea, 99% (EX N)
| 110-21-4 |
|
3-Methyl-2-nitrobenzoic acid, 98%
| 5437-38-7 |
|
2-Chloro-1,4-dimethoxybenzene, 99+%
| 2100-42-7 |
|
4-Bromo-2-fluorobenzaldehyde, 96%
| |
|
Cyanuric acid, 98%
| 108-80-5 |
|
LITHIUM TETRAPHENYLBORATE
| 14485-20-2 |
|
4-Quinolinecarboxaldehyde, 95%
| 4363-93-3 |
|
|