Search   
MSDS 
:
 N-Methylcyclohexylamine, 98%
CAS 
:
 100-60-7
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 100-60-7 |N-Methylcyclohexylamine | 98 | 202-869-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 21/22 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful in contact with skin and if swallowed. Causes
severe burns.Corrosive.Lachrymator (substance which increases the
flow of tears).

Potential Health Effects
Eye:
Contact with liquid or vapor causes severe burns and possible
irreversible eye damage.
Skin:
Causes skin irritation and possible burns.
Ingestion:
Harmful if swallowed. May cause severe gastrointestinal tract
irritation with nausea, vomiting and possible burns.
Inhalation:
Vapors may cause dizziness or suffocation. Causes respiratory tract
irritation with possible burns. Exposure can cause tearing, drooping
of eye lid, gasping, irregular heartbeat, nosebleed, prostration, and
convulsions.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Empty containers
retain product residue, (liquid and/or vapor), and can be dangerous.
Keep container tightly closed. Keep away from heat, sparks and
flame. Do not get on skin or in eyes. Do not ingest or inhale. Use
with adequate ventilation. Discard contaminated shoes. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Flammables-area. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 100-60-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: None reported.
pH: Not available.
Vapor Pressure: 5 hPa @ 20 C
Viscosity: 1.58 MPA 20.00 deg
Boiling Point: 149 deg C @ 760.00mm Hg
Freezing/Melting Point: -8 deg C
Autoignition Temperature: 170 deg C ( 338.00 deg F)
Flash Point: 29 deg C ( 84.20 deg F)
Explosion Limits, lower: 2.20 vol %
Explosion Limits, upper: 10.50 vol %
Decomposition Temperature:
Solubility in water: soluble in alcohol and ether
Specific Gravity/Density: .8680g/cm3
Molecular Formula: C7H15N
Molecular Weight: 113.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, acid chlorides, acid anhydrides.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 100-60-7: GX1529000
LD50/LC50:
CAS# 100-60-7: Oral, rat: LD50 = 400 mg/kg.
Carcinogenicity:
N-Methylcyclohexylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.*
Hazard Class: 8 (3)
UN Number: 2734
Packing Group: II
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2734
Packing Group: II
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2734
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 21/22 Harmful in contact with skin and if
swallowed.
R 35 Causes severe burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 100-60-7: 1
Canada
CAS# 100-60-7 is listed on Canada's NDSL List.
CAS# 100-60-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 100-60-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/05/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3,5-Dichloro-2-hydroxybenzenesulfonic Acid, Sodium Salt, 99% 54970-72-8
1,1,3,3-Tetramethylguanidine, 99% (gc) 80-70-6
Carminic Acid 96% 1260-17-9
Azelaic Acid, 98% (Titr.) 123-99-9
4-Chlorobenzyl Mercaptan, 98% 6258-66-8
3-Methyl-2-buten-1-ol, 99% 556-82-1
2-Aminothiazole, 97% 96-50-4
4-Fluorobenzyl bromide, 97% 459-46-1
2-Bromophenol, 98% 95-56-7
(s)-3-Isopropyl-2,5-piperazinedione, 99% ( hplc) 16944-60-8
Hydrogen tetrachloroaurate(III) hydrate, p.a. 16903-35-8
Cholesteryl Linoleate 604-33-1
Ethyl dibromoacetate tech., 83% 617-33-4
2-Thiophenecarbonitrile, 97% 1003-31-2
Oxazine 1 perchlorate, laser grade, 99+% (uv-vis) 24796-94-9
6-Methoxy-2-tetralone, 98% 2472-22-2
Sodium phosphate dibasic, dodecahydrate, p.a. 7558-79-4
2,4,5,6-Tetraaminopyrimidine Sulfate, 98% 5392-28-9
Prostaglandin VII, 96% 0-01-1
4-Anisylchlorodiphenylmethane, 97% 14470-28-1
Glycyl-L-histidyl-L-lysine acetate, 99% 62024-09-3
Methyl p-fluorobenzoylacetate, 99% 63131-29-3
N-Carbobenzyloxy-DL-Serine, 98% 2768-56-1
2,4,6-Trifluoroaniline, 97+% 363-81-5
2,2,6,6-Tetrachlorocyclohexanol, 98% 56207-45-5
Trimethylsulfonium bromide, 99% (titr.) 3084-53-5
3,5-Diaminobenzoic Acid Dihydrochloride, 99% 618-56-4
Perfluorodecalin (mixture of cis and trans), 95% 306-94-5
1-(4'-Iodophenyl)butane, 98% 20651-57-4
2-tert-Butylanthraquinone, 95% 84-47-9
2-Dimethylaminopyridine, 97% 5683-33-0
1-Propanesulfonyl chloride, 99% (titr.) 10147-36-1
5-Phenyl-o-anisidine, 98+% 39811-17-1
Glycoluril, 98+% 496-46-8
Acrolein, stabilized, 97% 107-02-8
2-(4-Methoxybenzoyl)Thiophene, 99% 4160-63-8
Cyclohexylamine, p.a. 108-91-8
2-(Methylthio)ethanol, 99% 5271-38-5
Penicillic Acid 90-65-3
N-Methylcyclohexylamine, 98% 100-60-7
Ethyl 4-Nitrobenzoate, 99% 99-76-3
Tellurium Atomic Absorption Standard Solution, 1 mg/ml Te in 2% KOH 236-81-3
L(-)-Perillyl Alcohol, 85% 536-59-4
4-Epi-Anhydrotetracycline Hydrochloride, "Can be used as Secondary 4465-65-0
Helicin, 99% 618-65-5
Diethyl 2-Bromo-2-Methylmalonate, 98% 29263-94-3
Iminodibenzyl, 97% 494-19-9
N-Phthaloylglycine, 99% 4702-13-0
(+)-Alpha-Pinene, 98% 7785-70-8
3-Hydroxy-2-Naphthoic Acid, 98% 92-70-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net