Search   
MSDS 
:
 4-Epi-Anhydrotetracycline Hydrochloride, "Can be used as Secondary
CAS 
:
 4465-65-0
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4465-65-0 |4-Epianhydrotetracycline Hydrochloride| 97% | unlisted |
| | | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 63

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Possible risk of harm to the unborn child.The toxicological
properties of this material have not been fully investigated.Light
sensitive.Moisture sensitive.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause liver and
kidney damage. The toxicological properties of this substance have
not been fully investigated.
Inhalation:
May cause respiratory tract irritation. May cause liver and kidney
damage. The toxicological properties of this substance have not been
fully investigated.
Chronic:
May cause liver and kidney damage. May cause reproductive and fetal
effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Place under an inert atmosphere. Do not get
water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Store protected from light. Handle
under an inert atmosphere. Store protected from air. Do not allow
contact with water. Store and handle protected from air. Keep from
contact with moist air and steam.
Storage:
Do not store in direct sunlight. Store in a tightly closed
container. Keep under a nitrogen blanket. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not expose
to air. Store protected from moisture. Store protected from light.
Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4465-65-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: orange
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 220 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 220 deg C
Solubility in water: in water: 1:1100 m/v
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 464.89

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, moisture, exposure to air, exposure to
moist air or water.
Incompatibilities with Other Materials:
Moisture, air.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4465-65-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Epianhydrotetracycline Hydrochloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 63 Possible risk of harm to the unborn child.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37 Wear suitable protective clothing and
gloves.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4465-65-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4465-65-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4465-65-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #7 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3,5-Dichloro-2-hydroxybenzenesulfonic Acid, Sodium Salt, 99% 54970-72-8
1,1,3,3-Tetramethylguanidine, 99% (gc) 80-70-6
Carminic Acid 96% 1260-17-9
Azelaic Acid, 98% (Titr.) 123-99-9
4-Chlorobenzyl Mercaptan, 98% 6258-66-8
3-Methyl-2-buten-1-ol, 99% 556-82-1
2-Aminothiazole, 97% 96-50-4
4-Fluorobenzyl bromide, 97% 459-46-1
2-Bromophenol, 98% 95-56-7
(s)-3-Isopropyl-2,5-piperazinedione, 99% ( hplc) 16944-60-8
Hydrogen tetrachloroaurate(III) hydrate, p.a. 16903-35-8
Cholesteryl Linoleate 604-33-1
Ethyl dibromoacetate tech., 83% 617-33-4
2-Thiophenecarbonitrile, 97% 1003-31-2
Oxazine 1 perchlorate, laser grade, 99+% (uv-vis) 24796-94-9
6-Methoxy-2-tetralone, 98% 2472-22-2
Sodium phosphate dibasic, dodecahydrate, p.a. 7558-79-4
2,4,5,6-Tetraaminopyrimidine Sulfate, 98% 5392-28-9
Prostaglandin VII, 96% 0-01-1
4-Anisylchlorodiphenylmethane, 97% 14470-28-1
Glycyl-L-histidyl-L-lysine acetate, 99% 62024-09-3
Methyl p-fluorobenzoylacetate, 99% 63131-29-3
N-Carbobenzyloxy-DL-Serine, 98% 2768-56-1
2,4,6-Trifluoroaniline, 97+% 363-81-5
2,2,6,6-Tetrachlorocyclohexanol, 98% 56207-45-5
Trimethylsulfonium bromide, 99% (titr.) 3084-53-5
3,5-Diaminobenzoic Acid Dihydrochloride, 99% 618-56-4
Perfluorodecalin (mixture of cis and trans), 95% 306-94-5
1-(4'-Iodophenyl)butane, 98% 20651-57-4
2-tert-Butylanthraquinone, 95% 84-47-9
2-Dimethylaminopyridine, 97% 5683-33-0
1-Propanesulfonyl chloride, 99% (titr.) 10147-36-1
5-Phenyl-o-anisidine, 98+% 39811-17-1
Glycoluril, 98+% 496-46-8
Acrolein, stabilized, 97% 107-02-8
2-(4-Methoxybenzoyl)Thiophene, 99% 4160-63-8
Cyclohexylamine, p.a. 108-91-8
2-(Methylthio)ethanol, 99% 5271-38-5
Penicillic Acid 90-65-3
N-Methylcyclohexylamine, 98% 100-60-7
Ethyl 4-Nitrobenzoate, 99% 99-76-3
Tellurium Atomic Absorption Standard Solution, 1 mg/ml Te in 2% KOH 236-81-3
L(-)-Perillyl Alcohol, 85% 536-59-4
4-Epi-Anhydrotetracycline Hydrochloride, "Can be used as Secondary 4465-65-0
Helicin, 99% 618-65-5
Diethyl 2-Bromo-2-Methylmalonate, 98% 29263-94-3
Iminodibenzyl, 97% 494-19-9
N-Phthaloylglycine, 99% 4702-13-0
(+)-Alpha-Pinene, 98% 7785-70-8
3-Hydroxy-2-Naphthoic Acid, 98% 92-70-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net