**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 80-70-6 |1,1,3,3-Tetramethylguanidine | 99% | 201-302-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat as a caustic agent.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Use spark-proof tools and explosion proof equipment. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 80-70-6:
Personal Protective Equipment
Eyes:
Wear chemical goggles and a face shield if splashing
is possible.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: Not available.
Odor: Mild ammoniacal odor
pH: Not available.
Vapor Pressure: .26 hPa @ 25 deg C
Viscosity: mPas 20 deg C
Boiling Point: 160 - 162 deg C @ 760.00mm Hg
Freezing/Melting Point: <-30 deg C
Autoignition Temperature: 350 deg C ( 662.00 deg F)
Flash Point: 60 deg C ( 140.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible with water
Specific Gravity/Density: .9180g/cm3
Molecular Formula: C5H13N3
Molecular Weight: 115.18
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong acids - acid chlorides - acid
anhydrides.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 80-70-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,1,3,3-Tetramethylguanidine -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.*
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 80-70-6: 2
Canada
CAS# 80-70-6 is listed on Canada's DSL List.
CAS# 80-70-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 80-70-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 8/24/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3,5-Dichloro-2-hydroxybenzenesulfonic Acid, Sodium Salt, 99%
| 54970-72-8 |
|
1,1,3,3-Tetramethylguanidine, 99% (gc)
| 80-70-6 |
|
Carminic Acid 96%
| 1260-17-9 |
|
Azelaic Acid, 98% (Titr.)
| 123-99-9 |
|
4-Chlorobenzyl Mercaptan, 98%
| 6258-66-8 |
|
3-Methyl-2-buten-1-ol, 99%
| 556-82-1 |
|
2-Aminothiazole, 97%
| 96-50-4 |
|
4-Fluorobenzyl bromide, 97%
| 459-46-1 |
|
2-Bromophenol, 98%
| 95-56-7 |
|
(s)-3-Isopropyl-2,5-piperazinedione, 99% ( hplc)
| 16944-60-8 |
|
Hydrogen tetrachloroaurate(III) hydrate, p.a.
| 16903-35-8 |
|
Cholesteryl Linoleate
| 604-33-1 |
|
Ethyl dibromoacetate tech., 83%
| 617-33-4 |
|
2-Thiophenecarbonitrile, 97%
| 1003-31-2 |
|
Oxazine 1 perchlorate, laser grade, 99+% (uv-vis)
| 24796-94-9 |
|
6-Methoxy-2-tetralone, 98%
| 2472-22-2 |
|
Sodium phosphate dibasic, dodecahydrate, p.a.
| 7558-79-4 |
|
2,4,5,6-Tetraaminopyrimidine Sulfate, 98%
| 5392-28-9 |
|
Prostaglandin VII, 96%
| 0-01-1 |
|
4-Anisylchlorodiphenylmethane, 97%
| 14470-28-1 |
|
Glycyl-L-histidyl-L-lysine acetate, 99%
| 62024-09-3 |
|
Methyl p-fluorobenzoylacetate, 99%
| 63131-29-3 |
|
N-Carbobenzyloxy-DL-Serine, 98%
| 2768-56-1 |
|
2,4,6-Trifluoroaniline, 97+%
| 363-81-5 |
|
2,2,6,6-Tetrachlorocyclohexanol, 98%
| 56207-45-5 |
|
Trimethylsulfonium bromide, 99% (titr.)
| 3084-53-5 |
|
3,5-Diaminobenzoic Acid Dihydrochloride, 99%
| 618-56-4 |
|
Perfluorodecalin (mixture of cis and trans), 95%
| 306-94-5 |
|
1-(4'-Iodophenyl)butane, 98%
| 20651-57-4 |
|
2-tert-Butylanthraquinone, 95%
| 84-47-9 |
|
2-Dimethylaminopyridine, 97%
| 5683-33-0 |
|
1-Propanesulfonyl chloride, 99% (titr.)
| 10147-36-1 |
|
5-Phenyl-o-anisidine, 98+%
| 39811-17-1 |
|
Glycoluril, 98+%
| 496-46-8 |
|
Acrolein, stabilized, 97%
| 107-02-8 |
|
2-(4-Methoxybenzoyl)Thiophene, 99%
| 4160-63-8 |
|
Cyclohexylamine, p.a.
| 108-91-8 |
|
2-(Methylthio)ethanol, 99%
| 5271-38-5 |
|
Penicillic Acid
| 90-65-3 |
|
N-Methylcyclohexylamine, 98%
| 100-60-7 |
|
Ethyl 4-Nitrobenzoate, 99%
| 99-76-3 |
|
Tellurium Atomic Absorption Standard Solution, 1 mg/ml Te in 2% KOH
| 236-81-3 |
|
L(-)-Perillyl Alcohol, 85%
| 536-59-4 |
|
4-Epi-Anhydrotetracycline Hydrochloride, "Can be used as Secondary
| 4465-65-0 |
|
Helicin, 99%
| 618-65-5 |
|
Diethyl 2-Bromo-2-Methylmalonate, 98%
| 29263-94-3 |
|
Iminodibenzyl, 97%
| 494-19-9 |
|
N-Phthaloylglycine, 99%
| 4702-13-0 |
|
(+)-Alpha-Pinene, 98%
| 7785-70-8 |
|
3-Hydroxy-2-Naphthoic Acid, 98%
| 92-70-6 |
|
|