Search   
MSDS 
:
 Triethylphenylammonium iodide, 99% (titr.)
CAS 
:
 1010-19-1
SYNONYMS 
:
 Benzenaminium, N,N,N-triethyl-, iodide; N, N, N-Triethylanilinium     iodide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1010-19-1 |Triethylphenylammonium iodide | 99.0 | 213-774-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1010-19-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: light brown to yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.054
Molecular Formula: C12H20IN
Molecular Weight: 305.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1010-19-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Triethylphenylammonium iodide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1010-19-1: No information available.
Canada
CAS# 1010-19-1 is listed on Canada's NDSL List.
CAS# 1010-19-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1010-19-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/26/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Methyl methacrylate, 99+% (GC) 80-62-6
Bicine, Biograde 150-25-4
Methyl P-Hydroxybenzoate, 99% (Titr.) 99-76-3
Methyl Red, reagent ACS 493-52-7
Methyl Salicylate, 99+% 119-36-8
Triethylphenylammonium iodide, 99% (titr.) 1010-19-1
CAPS, BioGRADE 1135-40-6
1,6-Dibromohexane, 98% 629-03-8
tert-Butyl methyl ether, 99% 1634-04-4
MES monohydrate 4432-31-9
Aluminum sulfate 10043-01-3
Aluminum sulfate octadecahydrate 7784-31-8
Dimethoxymethane, 99.5+% 109-87-5
Methylamine, 40 wt. % solution in water 74-89-5
TAPS, Biograde 29915-38-6
TRICINE, BioGRADE 5704-04-1
Acetone, Electronic Use Grade, Residue Free 67-64-1
Butyl acetate Electronic use grade, residue free 123-86-4
1,2-Dichloroethane, electronic use grade, residue free 107-06-2
Dichloromethane, Stabilized, Electronic Use Grade, Residue Free 75-09-2
Ethyl Acetate, Electronic use Grade, Residue Free 141-78-6
N-Hexane, Electronic Use Grade, Residue Free 110-54-3
Methyl alcohol, electronic use grade, residue free 67-56-1
2-Butanone, Electronic Use Grade, Residue Free 78-93-3
4-Methyl-2-Pentanone, Electronic Use Grade, Residue Free 108-10-1
Isopropanol, Electronic use Grade, Residue Free 67-63-0
Xylenes mixed, electronic use grade, residue free 1330-20-7
5-Fluorocytosine, 98% 2022-85-7
A23187 (Free Acid) 52665-69-7
A23187(Mixed Calcium-Magnesium Salt) 52665-69-7
Aluminum (Metallic, Powder) 7429-90-5
A23187, 4-Bromo 76455-82-8
Hydroxyurea, 98% 127-07-1
AEBSF Hydrochloride 30827-99-7
Calmidazolium chloride 57265-65-3
Calpain Inhibitor I 110044-82-1
Calpain Inhibitor II 136632-32-1
Calpeptin 117591-20-5
Calphostin C 121263-19-2
Capsazepine 138977-28-3
Creatine Phosphate Disodium Salt Tetrahydrate, 99% 922-32-7
D-LUCIFERIN 2591-17-5
D-LUCIFERIN SODIUM SALT MONOHYDRATE 103404-75-7
4-Nitrophenyl-Beta-D-Glucuronide 10344-94-2
4-NITROPHENYL-ALPHA-D-MANNOPYRANOSIDE HYDRATE, 99% 10357-27-4
Dichloromethane, CP, Stabilized With ca 0.2% Ethanol 75-09-2
Tris(2-butoxyethyl)phosphate 98% 78-51-3
D-Ribose-5-Phosphate Disodium Salt Hydrate, 95% 18265-46-8
Diiodomethane, 99+% 75-11-6
2-Phenylethyl-Beta-D-Thiogalactoside 63407-54-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net